Gary from PVC U like says certain DOP PVC is sticky?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Big Thud Joe
    Senior Member
    • May 2017
    • 407

    Gary from PVC U like says certain DOP PVC is sticky?

    I've been dealing with Gary the last few weeks in sourcing some DEHP / DOP PVC, there seems to be some confusion. I'm not sure in what capacity he means that it's going to be problematic. This is a direct quote from his last email.

    "BKS13 is 130 microns thick, it is shiny both sides, it has DOP as the plasticiser and it does stick and it would be more problematic to produce inflatable clothing. It is in stock in the UK."

    I've attempted in clarifying this further, but I feel some annoyance on his behalf, possibly to what could be repeated questioning on my behalf.

    I don't know whether I've missed something. He's talking about PVC clothing, I'm talking about making a life size inflatable character.

    So what I'm trying to ascertain, is the stickiness a problem with wearing clothing with this particular PVC? If that is the case, this would be a moot point as I'm not making any clothing.

    If he is referring to the stickiness being a problem during the cutting and assembly of the inflatable, then yes, I would understand his advice, and it would make more sense.

    Can someone more knowledgable about this shine some more clarity on this. I feel some tension between our communications, and not wanting to further it by asking the wrong question again.

  • Vicci
    Blown to bits
    • Oct 2009
    • 816

    #2
    I have some of their bks13, I think what he means is because it's gloss on both sides it really clings to itself when it touches, which is problematic for clothing (most of their materials are semi-gloss/matte on the back so don't have this problem) - for example sleeves stick together inside and you can't get your arm in, you separate the two sides to open it up but then it clings back together - making it really really difficult to get the clothing on. Also the force required to separate the material can lead to seam tears.
    Vicci x

    Comment

    • Big Thud Joe
      Senior Member
      • May 2017
      • 407

      #3
      So I'm surmising that when I deflate a life size inflatable body, made of this material and I put it away, when inflating it next time, this could be a problem as the PVC would stick together on the inside of the inflatable?

      THe confusion is between him talking about PVC clothing, and me talking about a custom made life size inflatable character. Where clothing is to be worn, I'm intending to get a number of these life size characters made for hugging, squeezing and playing around with, and not sure if I'm going to encounter the same problems as wearable PVC.

      I have no intention, nor desire for any wearable PVC, so not sure why the subject keeps coming up in our correspondence. I've sent some rough renders like the picture below so he could better picture what I'm talking about.

      I think to keep things simple, I'll get him to send a sample from his London office to Beile in China, where then I'll get some inflatable heads made for trying out. See what verdict that leads to. I'll have to keep the emails simple as this seems to be whats leading to the confusion.


      You do not have permission to view this gallery.
      This gallery has 1 photos.

      Comment

      • PVC Vinyl Enthusiast
        PVC Fetish
        • Jan 2013
        • 197

        #4
        Hey, Big Thud Joe;

        What Gary from PUL might have been implying is that the PVC material's 'stickiness' (which is referred by the technical term, 'blocking') makes it difficult to work with; for this reason it is lightly dusted with very fine powder (talc or cornstarch or something like that) to stop the 'blocking' and make the material easy to work with during manufacture of rainwear, etc..

        From our Fetish perspective, the 'blocking' is desired by many of us: the PVC material's 'blocking' is responsible for the 'rustling' and 'creaking' noise many of us enjoy. The glossy/shiny Glass Clear PVC materials 'block' very strongly once the talc/cornstarch powder has been washed off. I am pretty sure that the type of plasticizer used contributes to the 'blocking' (hence, the noise properties). From my experience, phthalate-type plasticizers are superior for making PVC soft and noisy.
        Enjoy soft, shiny and smooth PVC (inflatables and clothing). The 6P-free/10P-free material is total rubbish.

        Comment

        • PVC Vinyl Enthusiast
          PVC Fetish
          • Jan 2013
          • 197

          #5
          Originally posted by Vicci
          I have some of their bks13, I think what he means is because it's gloss on both sides it really clings to itself when it touches, which is problematic for clothing (most of their materials are semi-gloss/matte on the back so don't have this problem) - for example sleeves stick together inside and you can't get your arm in, you separate the two sides to open it up but then it clings back together - making it really really difficult to get the clothing on. Also the force required to separate the material can lead to seam tears.
          Vicci; You can, if you wish, overcome the 'blocking' (the material's 'stickiness') simply by lightly dusting with flour, scentless talcum powder or cornstarch. 'Candy Coated Squeaks' has a youtube video on this.

          Sure, the 'stickiness' or 'clinginess' (technically called 'blocking') can make garments/clothing more tricky to put on, but I overcome this simply by taking extra care and not rushing things! I personally don't bother dusting the material, as I actually want it to be 'clingy': the 'clinginess' is responsible for the 'rustling' and 'creaking' noises I enjoy.
          Enjoy soft, shiny and smooth PVC (inflatables and clothing). The 6P-free/10P-free material is total rubbish.

          Comment

          • craggy2012
            Senior Member
            • Jan 2012
            • 842

            #6
            I had PVC U Like make me an inflatable dual layer enclosure suit out of their gloss yellow 120 micron (at least I think it was 120 anyway?) and they emailed to say be careful with it as it’s quite “sticky” as PVC went. And it was. Wonderfully soft and very squeaky. Unfortunately it only lasted a couple of wears before the outer layer crotch ripped out. The problem is you soon start to sweat and the inner layer soon sticks to your back putting great pressure on the outer layers seams. The first you know it’s popped is when you get a cooling rush of air down a leg. You can’t see much wearing it through the clear hood, but it soon became apparent the suit was flat. I’ve owned a few of them over the years, but having gone through my fourth suit I didn’t think they were worth the money (plus I’m more into latex rubberwear these days- kinks change as you go on!).

            But, saying that I’ve a gloss yellow inflatable raincoat (two raincoats one welded inside the other with a pinch valve in the outer coat they made us and that’s lasted for a good few years now and is still good and air tight.

            Comment

            • Big Thud Joe
              Senior Member
              • May 2017
              • 407

              #7
              Okay guys, great for clarifying this, as I said, will go ahead with getting gary to send some BSK13 to Beile, and then I'll get some large heads and hollowed shapes of boots made, and see how that goes, will go ahead and get 20 meters ordered.

              So just means at Beile's end they'll have to powder things up during manufacturing, but that's okay, can clean things up once they reach Sydney.

              Comment

              • Beach ball humper
                Member
                • May 2014
                • 61

                #8
                Originally posted by Big Thud Joe
                I've been dealing with Gary the last few weeks in sourcing some DEHP / DOP PVC, there seems to be some confusion. I'm not sure in what capacity he means that it's going to be problematic. This is a direct quote from his last email.

                "BKS13 is 130 microns thick, it is shiny both sides, it has DOP as the plasticiser and it does stick and it would be more problematic to produce inflatable clothing. It is in stock in the UK."

                I've attempted in clarifying this further, but I feel some annoyance on his behalf, possibly to what could be repeated questioning on my behalf.

                I don't know whether I've missed something. He's talking about PVC clothing, I'm talking about making a life size inflatable character.

                So what I'm trying to ascertain, is the stickiness a problem with wearing clothing with this particular PVC? If that is the case, this would be a moot point as I'm not making any clothing.

                If he is referring to the stickiness being a problem during the cutting and assembly of the inflatable, then yes, I would understand his advice, and it would make more sense.

                Can someone more knowledgable about this shine some more clarity on this. I feel some tension between our communications, and not wanting to further it by asking the wrong question again.
                Is this the PVC U LIKE website?

                Comment

                • Vicci
                  Blown to bits
                  • Oct 2009
                  • 816

                  #9
                  He probably keeps mentioning clothing as that's more commonly what they make - they make inflatable suits and as craggy has said, will make custom inflatable clothing - so it's probably just a misunderstanding on his part. Just be clear with him, he's a decent guy and what you're asking won't be the weirdest thing he's ever been asked.

                  Julie in their office is also really good when it comes to custom items from them, been to their factory (the new one and their old one) a couple of times to rifle through their seconds and ex-photo shoot items and they're a genuine bunch of people, so don't let a slight misunderstanding put you off 🙂
                  Vicci x

                  Comment

                  Working...