Lol, I'm no stranger to the intex whales haha. Seltzer can (size of a large redbull) for scale.
IW Whale Stretching
Collapse
X
-
Ah thanks for the explanation. I‘m going to try that if I’ll have the time.
For me I use a steam cleaner, but a simple hair dryer should be enough. Inflate the whale somewhat tight first (dont overdo or the seams will pop) then apply heat evenly and you will see the material will start to stretch. But make sure not to put the heat to long on one part of the pvc or it will burst. From time to time you need to add more air.
You can make the inflateable around 2-3 times bigger then the original. But be warned it wont be as durable and the effect only lasts until it gets deflated, after that it will get smaller again.
Comment
-
Comment
-
I live in the South West of the US. Hot sunny summers. I jist left it outside and inflated it more a few times a day. Took like 2 days to get that big. And it's pretty strong! Atleast this one is. I've had some pop on their own without touching it. I've had some, like this one, last for 6 monthsComment
-
Oh that makes it a lot easier haha
Its like a natural heath stretching.
Because when you try to reach such sizes with a fan or something they pop about half the size maybe? And it never gets that evenly
But yes Qualities vary a lot on these. I had some that took massive abuse and overinflating and some that pop when you just streched it a bitComment
-
I hear ya here. I live in a (much) colder climate with less space/privacy so my chosen solution is a showerhead on full hot. (Don't get that on you, it stings btw)
Because when you try to reach such sizes with a fan or something they pop about half the size maybe? And it never gets that evenly
But yes Qualities vary a lot on these. I had some that took massive abuse and overinflating and some that pop when you just streched it a bit
It's not quite as even as a hot sun, but it's a pretty mild tool that you can easily direct and spread the effect of.
The only downside is you might have to inflate a little firmer to get a more vissible result.
Hope that helps!
I quit using hot air for the same reason you don't like it - it's too hard to "dose" it correctly leading to weak spots/blowouts.
For a while I used boiling water but a) it's dangerous b) it's fairly uncontrollable and c) boiling up a quantity of it takes time and it doesn't go very far. d) blowouts can be painful if you get the very hot water spattered back on you.Comment
-
I tried with a steam cleaner as well not as dangerous as hot boiling water but not even as well.
The shower is a good method but since you cant really deflate it and put it to another room since it wouldnt fit through doors and stuff its not the best option.
I guess the hot sun is way way more effectiveComment
-
So I've tried blow driers, steam cleaners, heat guns, boiling water, you name it. But the 2 things I found that work the best, are the sun (sorry if that's not possible for you) and a fire pit. I use a 55 gallon oil barrel I've converted to an oil burner to burn waste motor oil (or regular wood will work jist fine). Stoke the fire to get that metal starting to glow and the radiant heat will pretty evenly stretch whatever you like. It'll heat large portions, just gotta be pretty mindful of how hot it will get lol. It's also extremely even.I tried with a steam cleaner as well not as dangerous as hot boiling water but not even as well.
The shower is a good method but since you cant really deflate it and put it to another room since it wouldnt fit through doors and stuff its not the best option.
I guess the hot sun is way way more effectiveComment
-
Yeah sun is maybe an option in summer but still not too easy to do since its not too hot.
Another idea that may work out is an electrical raditor. Should be pretty similar to the sun not too fast and pretty even.👍 1Comment
-
Yeah! That would work alot better than the heat guns. Like a reflector radiator. The ones with the big dish on them I think would be a great idea!Comment
-
Another idea I just had was a thermal blanket that you put over the firm inflated whale. Definitly gonna try that since its not too expensive.Comment
-
I have one of those Shark portable steam cleaners, they work fast and with a single tank of water can do some real damage! You can also add ATBC to the tank and atomize the plasticiser with steam for almost immediate results and better stretching, I've been experimenting with adding methyl hydrate cause the ATBC is polar and wont mix with the water. Just don't ask or attempt any of this if you are lousy with basic chemistry and flammable hazards.
I miss the hot summer days when I lived in the kern desert.. an intex whale would usually pop on it's own in a day inflated if tight and put about a half liter of water inside.. leave it out in the sun rolling it over from time to time.
U
Comment
-
HOLY SHIT WATER INSIDE OF IT?! I never thought of that...I have one of those Shark portable steam cleaners, they work fast and with a single tank of water can do some real damage! You can also add ATBC to the tank and atomize the plasticiser with steam for almost immediate results and better stretching, I've been experimenting with adding methyl hydrate cause the ATBC is polar and wont mix with the water. Just don't ask or attempt any of this if you are lousy with basic chemistry and flammable hazards.
I miss the hot summer days when I lived in the kern desert.. an intex whale would usually pop on it's own in a day inflated if tight and put about a half liter of water inside.. leave it out in the sun rolling it over from time to time.
UComment
-
Comment
Comment