Inner tubes

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • innertubelover
    Junior Member
    • Dec 2023
    • 28

    Originally posted by Falcon

    Yeah I have a bunch of smaller tubes (truck tires) I don't keep them inflated. The bottom one can get much larger it's 30.5LR32 but I keep it soft.
    30.5LR32 is nice size to big for my appointment but is so nice. Which brand is this tube? Soft?

    Comment

    • innertubelover
      Junior Member
      • Dec 2023
      • 28

      Originally posted by Falcon

      What I do is find the size I like then look at the cheaper brands in that size. Usually their cheaper because the rubber is thinner.
      where are you from? I'm also watching a good one. I have an agreement WITH several tire services and the mechanics leave nice copies for me. I can get better quality inner tubes cheaply. I do NOT take all the solomons that are better and play nicely. nice bouncing. but Mickey's Thompson are my favorite. Especially used older production. I have new ones, but they are not that good. Thompson tube SE can be found cheaply in America through ads or in Canada. excellent, used, very soft to the touch. This two I find from 1987. So nice so good. And size 14.5-15 from USA At this moment have 10 Thompson's
      Attached Files

      Comment

      • Guest

        Thank you everyone! I am in the USA.

        Comment

        • tubedude99
          Junior Member
          • Dec 2023
          • 11

          Always forget to log in more regularly here.

          A few weeks ago I came out of my shell and visited a local tire shop to see if they had any used tubes. Unfortunately everything they had was torn or sliced up beyond repair. Went back Friday and they had no tubes whatsoever.

          However, I decided to try my luck at another tire shop that just recently changed hands. I drive by this shop nearly daily on my way to and from work, and saw piles of tubes occasionally last year outside their shop. (Unfortunately I was too timid to stop in and ask about taking or going through them.) Even though they didn't have any outside like usual, they took me into the shop area where they had a few tubes just laying around. Unfortunately, all but one were in the same condition as the ones at the first shop a few weeks back — torn beyond repair.

          However, they had one that seemed to hold air: A South Korean (Gateway) 12L-15/16 butyl tube. I could see from the valve that it had Slime sealant in it, which concerned me. Later Friday night I brought it in, rinsed much of the dirt off, and pumped it up using my bicycle pump.

          Indeed, it seems to hold air. Pumps up quite nicely, great texture. (Had obviously been installed in some type of tire before, as evidenced by the texture left behind.) It's beefier than the MR-14/15 tubes I usually play with — inflates larger (both taller and wider), and the rubber itself is thicker. It has a really nice "leathery" feel to it. Seems to be the perfect size for a floating or snow tube, since it's almost the perfect size for me. It seems a lot of the Slime had been removed or dried up, as none comes out when the valve core is removed to deflate the tube. With that said, this tube takes a LONG time to deflate.

          I wonder what type of application it was used in. The 12L-15/16 tubes I could find are marked for farm implements, but this tube is marked "RADIAL" on its valve stem (as opposed for use in only bias ply tires, such as those found on farm implements.) It had clearly been installed in a radial tire before, given the imprints left by the tire it had been installed in. Oh well, now it has a new purpose. 🤣😉

          Because I found this tube, I'm thinking about possibly getting a 10.00-20 tube on my next new tube order.
          20240301_125l_pickup_001.jpg
          20240301_125l_first_inflation_001.jpg 20240301_125l_first_inflation_002.jpg 20240301_125l_first_inflation_005.jpg 20240301_125l_first_inflation_006.jpg

          Comment

          • innertubelover
            Junior Member
            • Dec 2023
            • 28

            Originally posted by tubedude99
            Always forget to log in more regularly here.

            A few weeks ago I came out of my shell and visited a local tire shop to see if they had any used tubes. Unfortunately everything they had was torn or sliced up beyond repair. Went back Friday and they had no tubes whatsoever.

            However, I decided to try my luck at another tire shop that just recently changed hands. I drive by this shop nearly daily on my way to and from work, and saw piles of tubes occasionally last year outside their shop. (Unfortunately I was too timid to stop in and ask about taking or going through them.) Even though they didn't have any outside like usual, they took me into the shop area where they had a few tubes just laying around. Unfortunately, all but one were in the same condition as the ones at the first shop a few weeks back — torn beyond repair.

            However, they had one that seemed to hold air: A South Korean (Gateway) 12L-15/16 butyl tube. I could see from the valve that it had Slime sealant in it, which concerned me. Later Friday night I brought it in, rinsed much of the dirt off, and pumped it up using my bicycle pump.

            Indeed, it seems to hold air. Pumps up quite nicely, great texture. (Had obviously been installed in some type of tire before, as evidenced by the texture left behind.) It's beefier than the MR-14/15 tubes I usually play with — inflates larger (both taller and wider), and the rubber itself is thicker. It has a really nice "leathery" feel to it. Seems to be the perfect size for a floating or snow tube, since it's almost the perfect size for me. It seems a lot of the Slime had been removed or dried up, as none comes out when the valve core is removed to deflate the tube. With that said, this tube takes a LONG time to deflate.

            I wonder what type of application it was used in. The 12L-15/16 tubes I could find are marked for farm implements, but this tube is marked "RADIAL" on its valve stem (as opposed for use in only bias ply tires, such as those found on farm implements.) It had clearly been installed in a radial tire before, given the imprints left by the tire it had been installed in. Oh well, now it has a new purpose. 🤣😉

            Because I found this tube, I'm thinking about possibly getting a 10.00-20 tube on my next new tube order.
            20240301_125l_pickup_001.jpg
            20240301_125l_first_inflation_001.jpg 20240301_125l_first_inflation_002.jpg 20240301_125l_first_inflation_005.jpg 20240301_125l_first_inflation_006.jpg
            are you happy with that tube? it's a nice size. I like it. I also like such sizes. use is possible in JCB tires (front small tractor tube tire), size for them can be 11.5-16 or 12.5-16 or for light trucks or jeep or tractor trailers tires. yes, it is bigger than automotive inner tubes 14/15 olmoust double air capacity. how much did you pay or do the guys give it to you for free? do you want to pick up more? boys regularly have that. What did they tell you?

            Comment

            • tubedude99
              Junior Member
              • Dec 2023
              • 11

              I'm happy with it. They gave it to me since it was used... would've likely ended up going to the recyclers anyway. There is still a little bit of slime left inside, as I discovered when deflating and folding it up for storage last night. But it seems to be such a small amount that I don't think I'll worry about it. Just have to be a little more careful when deflating, and avoid popping it so slime doesn't go everywhere.

              If only there was a way it could tell me its story. 🤣 A fella on YouTube has a couple videos of deflating a 33x12.50R15LT tire on their pickup truck, which is perfect for watching while this 12.5L-15/16 tube slowly deflates. (I know this tube likely wouldn't work in that tire, but still. Almost makes me wish I still had my first car, a 1980s pickup, so I could do the same again.)

              Comment

              • Slow DeFlaite
                Senior Member
                • Apr 2023
                • 314

                I'm interested in Massively CUM stained inner tubes!

                Comment

                • frankfrank
                  Empathetic Harmonizer
                  • Feb 2018
                  • 312

                  Mickey Thompson tubes (I looked) are a bit out of my range, when a 50-cent punchball can satisfy me well, lol. But of course the punchball or balloon can pop easier.
                  People who don't know the difference between BURRO and BURROW, can't tell their ass from a hole in the ground.


                  There's been a lot of thefts of helium-filled balloons recently. More so than in the past, so they're going up. I think inflation is to blame.

                  "Some people without brains do an awful lot of talking." - The Scarecrow, WIZARD OF OZ, 1939

                  Comment

                  • tubedude99
                    Junior Member
                    • Dec 2023
                    • 11

                    Originally posted by frankfrank
                    Mickey Thompson tubes (I looked) are a bit out of my range, when a 50-cent punchball can satisfy me well, lol. But of course the punchball or balloon can pop easier.
                    There are plenty of much cheaper tubes, but they're almost all butyl. There are some tubes marketed as "natural rubber" online for around the same price as a typical butyl tube, but — as the price would imply — most are either mislabeled (and are 100% butyl) or use a blend of butyl and natural rubbers. The MT tubes, among some other expensive tubes, are 100% natural rubber and feel/stretch better. (Many say you can tell by the color of the stripe on the side of the tube — blue for butyl, white for natural rubber. I'm not sure how trustworthy that is since I've seen some tubes marked with white lines that are butyl, and I've seen red, purple, green and other colors of stripes — even some tubes with multiple different colored stripes.)

                    Before I got into automotive tubes I purchased a couple latex punchball bladders. Being more like a balloon they're very fragile (had one ruined by just inserting the inflation needle just a bit too far), but inflate massively before popping. 😂 Don't think I've seen one for $0.50, but that's here in the U.S. I'm pretty sure the only difference between them and a balloon is they cut the neck off and replace it with a needle valve.

                    Comment

                    • frankfrank
                      Empathetic Harmonizer
                      • Feb 2018
                      • 312

                      ^ One doesn't find single-packaged punch-balloons for $0.50 in the US, but in quantity packaging (such as the Chinese ones I just got), they can average out to even less.
                      People who don't know the difference between BURRO and BURROW, can't tell their ass from a hole in the ground.


                      There's been a lot of thefts of helium-filled balloons recently. More so than in the past, so they're going up. I think inflation is to blame.

                      "Some people without brains do an awful lot of talking." - The Scarecrow, WIZARD OF OZ, 1939

                      Comment

                      • Falcon
                        Senior Member
                        • Jun 2023
                        • 170

                        I never understood how people found vinyl as enjoyable as rubber. The feeling of soft warm rubber under you is what summer was meant for :P

                        Comment

                        • Robkopter
                          Member
                          • Aug 2018
                          • 73

                          Originally posted by Falcon
                          I never understood how people found vinyl as enjoyable as rubber. The feeling of soft warm rubber under you is what summer was meant for :P
                          The feeling of a warm old soft stretchy inner tube under you <3
                          Feeling it stretch as you hump it.
                          And the intoxicating smell of quality rubber.

                          Comment

                          • innertubelover
                            Junior Member
                            • Dec 2023
                            • 28

                            Old Dunlop inner tube. Perfect condition.
                            Attached Files

                            Comment

                            • Robkopter
                              Member
                              • Aug 2018
                              • 73

                              Originally posted by innertubelover
                              Old Dunlop inner tube. Perfect condition.
                              I bed that tube feels great to hump it :3

                              Comment

                              • innertubelover
                                Junior Member
                                • Dec 2023
                                • 28

                                Originally posted by Robkopter

                                I bed that tube feels great to hump it :3
                                Excellent

                                Comment

                                Working...