latex sleeves and super thick gloves

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • onemoreblow
    Master Over Inflator
    • Sep 2013
    • 131

    latex sleeves and super thick gloves

    Finds from amazon.

    nobgum 24 inch length gloves, 1.1 mm thick. They stink like recycled tires and blow up like an inner tube. Too thick for my taste.

    The latex arm sleeves are much softer and you have to tie (or wear) one end and inflate through the other. I knotted the corners and left a slit to inflate through and it worked kind of like a punch ball. The feel is "medium glove thickness"
    Attached Files
  • TTNZ6853
    Member
    • Sep 2026
    • 97

    #2
    Pity about the smell of those gloves, at 1.1 mm, they sound interesting otherwise. Not something you'd want in your bedroom if you have others in your house.
    The sleeve looks good, if I had some I'd tie the wide end tightly with strips from a burst glove then tie the narrower end the same way to one of my home made non return valves. The effect would be very similar to what you have done.
    Well done.

    Comment

    • glovepopper
      Senior Member
      • May 2019
      • 390

      #3
      Yes, these thick industrial rubber gloves usually smell awful and aren't very stretchy - they burst before they reach a satisfactory size...
      Attached Files

      Comment

      • Dr_Atlanta
        Member
        • Sep 2020
        • 70

        #4
        Woahhhhhh

        Comment

        • 154#
          Fly with me (;
          • Mar 2026
          • 229

          #5
          [QUOTE=onemoreblow;n251845]Finds from amazon.

          They stink like recycled tires and blow up like an inner tube. Too thick for my taste.

          😂😂🤣🤣🤣🤣🤣












          Attached Files

          Comment

          • Hellus
            Tough Blower
            • Mar 2025
            • 182

            #6
            The arm sleeves look great. Do the rubber bands hold up against pressure? Did you blow up the industrial gloves by mouth?

            Comment

            • onemoreblow
              Master Over Inflator
              • Sep 2013
              • 131

              #7
              The glove was extremely difficult to inflate and wasn't getting that large. I didn't push it to the limits yet. The arm sleeves are kind of like "exam glove rubber" but thicker, if that makes sense? I also tried natural/white and the feel is similar. Yes just knotting it with popped balloon neck pieces (or rubber bands) is enough to hold the smaller end completely closed. With the larger end, putting them at the corners and leaving about 1.5" gap makes it inflate like shown, and you can "stick things" in the gap but it slowly loses air.

              If you want it smooth, you could knot it first and turn it inside out before tying the small end (which you could also tie by pulling it through the slot first to make it completely smooth/round like a ball).

              Comment

              • TTNZ6853
                Member
                • Sep 2026
                • 97

                #8
                I'm trying to visualize you blowing that glove: you need to keep your mouth on it to seal so you need to inhale through your nose but that's not possible when you have a peg over your nose to stop the smell LOL!

                Such a shame about the smell, I'd love to try them if I could somehow get some but I could never get away with it because the smell would create attention to their presence.

                They sound like they would be a great challenge especially since I'm only small and not at all fit but can seem to blow some things that aren't totally easy.

                Comment

                • Hellus
                  Tough Blower
                  • Mar 2025
                  • 182

                  #9
                  Originally posted by onemoreblow
                  The glove was extremely difficult to inflate and wasn't getting that large. I didn't push it to the limits yet.
                  They will, after multiple inflations, at least 10 or so. Whether or not they will get huge or not depends on how long you can hold up, but little old gloves can definitely be blown to pop. 24" has very large opening, which means a good chance of air leak. 16" and 18" ones have much better grips.
                  N.B. My profile picture is a blown up 22" industrial rubber glove. Modest compared to what it can be, but still large enough.

                  Comment

                  • onemoreblow
                    Master Over Inflator
                    • Sep 2013
                    • 131

                    #10
                    In your experience are there any brands of dishwashing gloves (like playtex or arm and hammer) or amazon versions that inflate really easily? The ones I tried were much smaller than normal exam gloves on first inflation and really tight.

                    Comment

                    • TTNZ6853
                      Member
                      • Sep 2026
                      • 97

                      #11
                      I don't think any brand of dishwashing gloves would be hard to inflate but the cheap yellow ones found in many supermarkets would probably be amongst the easiest. If you can inflate a balloon you can inflate most gloves with ease, obviously not talking about the very thick industial gloves mentioned above, they won't be used for dishwashing.
                      I don't know 'arm and hammer' but it sounds like the name of a hardware chain shop so if you have one near you 'pop' in and grab some yellow gloves if they have them (watch out for flock lined gloves though, you won't want those).
                      Don't be surprised if you have to try several different brands of gloves to find a good compromise between good texture and not bursting at the level of inflation you desire.

                      Come back and let us know what you find.

                      Comment

                      Working...