5 Geo Donuts in a Party City 24"

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • someloonerguy
    Member
    • Aug 2016
    • 52

    5 Geo Donuts in a Party City 24"

    Had some of the clear Amscan 24" balloons from Party City and some Geo Donuts. Out of curiosity I've been wanting to see how many I can fit into the 24" while it still be stable and, hopefully, not suddenly pop. So far I've got five in there, almost one of every color (just need an Orange and Clear). It's been kind of a neat thing to do and is really pretty.

    Pic included.
    Attached Files
  • AuroraFox
    Member
    • Nov 2015
    • 62

    #2
    Re: 5 Geo Donuts in a Party City 24"

    That looks pretty nice! And a lot of fun too. I'd like to get some clear 24"s as well and see how many regular 12" could fit in there.

    Comment

    • Popemall

      #3
      Re: 5 Geo Donuts in a Party City 24"

      oh wow, thats hot. Hopefully you enjoy those geos when you finished hehe

      Comment

      • someloonerguy
        Member
        • Aug 2016
        • 52

        #4
        Re: 5 Geo Donuts in a Party City 24"

        So, today I was going to add in the last 2 Geos colors that I haven't gotten in there when I figured something out about the clear balloon. Every day I've noticed that the balloon was a bit smaller than it was before, it had been slowly deflating. At first I thought it was the clip I was using, either it didn't work well or I messed up. I was inflating it again and starting to get it a bit bigger to start getting another Geo into it when I happened to feel like what seemed like a small stream of air coming off of the balloon itself.

        The thing had a hole in it. Then it hit me- That thing HAD A HOLE IN IT... and I had inflated it up to and slightly past its rated size, while it had a hole in it. I'm debating on whether I should try patching it or leave as-is or putting it on the pump and seeing just how big it would get with the hole. But I'm pretty amazed as every other time I've had a hole the balloon would just pop the instant the hole started to expand. But not this time, for a many times I get a balloon with pretty bad defects (this bag had two with holes in them) the Amscan 24" do seem to be pretty strong and/or stretchy in their own right, especially if inflation to rated size doesn't seem to cause a hole to be nearly as fatal.

        Oh, I ended up deflating all of the Geos and transferring them to a less hole-filled one. All seven colors are in it, all of them rated size. The outer balloon is about 29" with very little pre-stretching. It's very tight though, the neck started to slightly inflate when I was inflating the last Geo inside of it. So nerve racking but oh that made it such a turn on.

        Comment

        • lilolover82
          Senior Member
          • Mar 2014
          • 201

          #5
          Re: 5 Geo Donuts in a Party City 24"

          So is it a small hole/leak or is it going out pretty quickly
          Washington State, United States

          Comment

          • someloonerguy
            Member
            • Aug 2016
            • 52

            #6
            Re: 5 Geo Donuts in a Party City 24"

            Originally posted by lilolover82
            So is it a small hole/leak or is it going out pretty quickly
            It's a pretty small leak but you can definitely feel air rushing out of it. I just did a quick test to see the viability of patching with rubber cement and a piece of another balloon, with another Party City balloon. That one had a hole in it as well but I previously patched it but was too nervous to ever properly inflate it until I finally had a chance, and the nerve, to hook it up to the pump and let it burst. Without really any prestretching it got up to about 33" before it gave in. Surprisingly, it didn't pop anywhere near the patch. It looks like it ruptured on a flute line. The patch, and the surrounding area, is perfectly intact. Gonna patch the one with a hole the same way and start looking into other things I could do with rubber cement, like joining balloons together (which will most likely not work and be very difficult, but, eh, it'd be interesting to see).

            Comment

            • lilolover82
              Senior Member
              • Mar 2014
              • 201

              #7
              Re: 5 Geo Donuts in a Party City 24"

              We don't have Party City stores where we are to my knowledge, we have dollar stores, and I've never found a place locally to get GL balloons.
              Washington State, United States

              Comment

              • LoudPopper
                Senior Member
                • Jan 2016
                • 257

                #8
                Re: 5 Geo Donuts in a Party City 24"

                So with all this patching, how reliable do you say patching really is in the first place? I've personally never patched a balloon, and really never really knew how to be honest, but is it worth it? I've heard of people patching really exotic or rare balloons like GL. But from my experience Party city 24"s are relatively common, and not the most durable. I guess I'm asking in general do you think patching is worth it? And how do you patch while we're at it?

                Comment

                • Shred
                  Junior Member
                  • Feb 2017
                  • 4

                  #9
                  Re: 5 Geo Donuts in a Party City 24"

                  Patching balloons? This is definitively the first time I ever hear of that. Can't really imagine how that should work, as balloons are generelly alot thinner than inflatable toys. I'm pretty sure the chemicals in the glue would dissolve the latex and make any balloon go boom if you try to add some upon. Youtube doesn't show any results by searching for patching balloons, so if this method acutally works, maybe someone could show us an example? I'm really curious but full of doubts about it

                  Comment

                  • john1bl
                    Senior Member
                    • Jan 2014
                    • 124

                    #10
                    Re: 5 Geo Donuts in a Party City 24"

                    This does work!! I have done it but instead of using liquid rubber I used rubber cement. I have also glued balloons together like a tt17 on a Q646.

                    Comment

                    • someloonerguy
                      Member
                      • Aug 2016
                      • 52

                      #11
                      Re: 5 Geo Donuts in a Party City 24"

                      Originally posted by LoudPopper
                      So with all this patching, how reliable do you say patching really is in the first place? I've personally never patched a balloon, and really never really knew how to be honest, but is it worth it? I've heard of people patching really exotic or rare balloons like GL. But from my experience Party city 24"s are relatively common, and not the most durable. I guess I'm asking in general do you think patching is worth it? And how do you patch while we're at it?

                      I used rubber cement and a shard of an old TT 24" that had popped. I cleaned both the TT shard and the area of the Amscan with the hole, let dry, applied rubber cement to the TT shard, then pressed it down, firmly, on the Amscan. After it stayed put I cleaned the area around the patch of any more rubber cement. The other day I got brave enough to pump it to bursting. I've attached a pic of what it looked like right before popping. I've circled where the patch was applied. My estimate of how big it got was about 33", and that was barely any sort of pre-stretch and no real preinflation. Interestingly, the failure point wasn't the patch, or anywhere near it. That held just fine.

                      I seem to remember reading about a guy who used small pieces of popped balloons and liquid latex or something as glue to patch holes. Can't remember where I read it though.
                      If true, I would love to know where he got the liquid latex. I want to try making my own balloons but there's so much I don't know.

                      This does work!! I have done it but instead of using liquid rubber I used rubber cement. I have also glued balloons together like a tt17 on a Q646.
                      That sounds really interesting! Could you elaborate? Like, did you cut a hole in the TT and rubber cement it to the 646 or something? I have some balloons that, when they popped, didn't really burst into small bits but just large pieces and I'm curious if I could combine them, since they're all similar in strength and stretch, to create some monster Frankenloon combination.
                      Attached Files

                      Comment

                      • john1bl
                        Senior Member
                        • Jan 2014
                        • 124

                        #12
                        Re: 5 Geo Donuts in a Party City 24"

                        I think there is a limit on the amount of gluing you can do. I used a mandrel to keep the two balloons from wrinkling.

                        Comment

                        • john1bl
                          Senior Member
                          • Jan 2014
                          • 124

                          #13
                          Re: 5 Geo Donuts in a Party City 24"

                          If I can get some time I will do the 17" with the 646.

                          Comment

                          • someloonerguy
                            Member
                            • Aug 2016
                            • 52

                            #14
                            Re: 5 Geo Donuts in a Party City 24"

                            Originally posted by john1bl
                            If I can get some time I will do the 17" with the 646.
                            That'd be fantastic. Is there any way you can describe what you did?

                            Comment

                            • LoudPopper
                              Senior Member
                              • Jan 2016
                              • 257

                              #15
                              Re: 5 Geo Donuts in a Party City 24"

                              If you guys subscribe to the buddylist listserve you can see that there's a couple of folks on there that either make their own balloons w/ the liquid latex, or they make really interesting shapes by glueing balloons together. If I can find a pic, I'll show ya.

                              Comment

                              Working...