Heating balloons to make them softer/bigger. Whats the best way?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bubblyzzz
    Senior Member
    • Jul 2017
    • 295

    #16
    Re: Heating balloons to make them softer/bigger. Whats the best way?

    Originally posted by Whale Rider
    no sticking together? that why I dry em seperately carefully arranged on a towel
    Nope, never

    Comment

    • Bubblyzzz
      Senior Member
      • Jul 2017
      • 295

      #17
      Re: Heating balloons to make them softer/bigger. Whats the best way?

      Originally posted by onemoreblow
      I use https://www.amazon.com/CROWNFUL-Conv.../dp/B087WW1W78

      The rotisserie cage is helpful. It works well but it is inconsistent because it can get way too hot. I had to modify it to get good results. The green one is unbaked.

      [ATTACH]2451[/ATTACH]
      Where do you get those prints? Are they punchballs?

      Comment

      • BYGavia
        Senior Member
        • Dec 2017
        • 259

        #18
        Re: Heating balloons to make them softer/bigger. Whats the best way?

        Originally posted by Bubblyzzz
        Where do you get those prints? Are they punchballs?
        Probably these: https://balloune-qc.com/collections/...h-ball-balloon

        Comment

        • concrete
          Member
          • Aug 2020
          • 53

          #19
          I randomly found this guy who experiments with heat stretching balloons: https://www.flickr.com/photos/198058...n/photostream/ and he also did some stretching (reportedly by using isopropyl alcohol, acetic acid and heat) of nitrile gloves: https://www.flickr.com/photos/198058...8/52778963749/
          I think this might be of some interest here :-).

          Comment

          • Jup
            DIY balloon tools
            • Aug 2021
            • 43

            #20
            Back to this hobby of baking balloons to make them softer and larger.

            Pictures of my latest experiment. Before baking the balloons were like 4 breath inflated to get them a little stretched and rounder in the oven.

            The wirerack is genius honestly, can just hang a lot of them vertical at once with little effort, avoids sticking as well when they get soft-ish in the oven. 140-160c seems to be a decent spot for these soaps when working with inaccurate temperature control. 140c can be sustained for long time without much damage, but a short while at 150-160c after does make them noticeably larger and softer.

            Tried to inflate the pink ones with an imperfect seal at the pump (allowed air to escape) so they got to roughly the same internal pressure for size comparison, not much of a blow or pump to pop person usually so not stretching to the max.

            The bake times for the balloons in the pictures are 5 minutes at 140, with another 3-4 minutes while the oven slowly climbed to 160c for the biggest ones.
            Attached Files
            Last edited by Jup; 26-03-2024, 15:47. Reason: Added correct pictures directly to forum

            Comment

            • srob2
              Senior Member
              • Dec 2017
              • 552

              #21
              Originally posted by Jup
              Back to this hobby of baking balloons to make them softer and larger.

              Pictures of my latest experiment. Before baking the balloons were like 4 breath inflated to get them a little stretched and rounder in the oven.

              The wirerack is genius honestly, can just hang a lot of them vertical at once with little effort, avoids sticking as well when they get soft-ish in the oven. 140-160c seems to be a decent spot for these soaps when working with inaccurate temperature control. 140c can be sustained for long time without much damage, but a short while at 150-160c after does make them noticeably larger and softer.

              Tried to inflate the pink ones with an imperfect seal at the pump (allowed air to escape) so they got to roughly the same internal pressure for size comparison, not much of a blow or pump to pop person usually so not stretching to the max.

              The bake times for the balloons in the pictures are 5 minutes at 140, with another 3-4 minutes while the oven slowly climbed to 160c for the biggest ones.
              What brand are these? How do they smell? When you say "4 breath inflated", you mean you took a fresh balloon, blew 4 big breaths, let the air out and then put it in the oven?

              Comment

              • Jup
                DIY balloon tools
                • Aug 2021
                • 43

                #22
                Originally posted by srob2

                What brand are these? How do they smell? When you say "4 breath inflated", you mean you took a fresh balloon, blew 4 big breaths, let the air out and then put it in the oven?
                Forgot to mention a bunch of things yeah, whups.
                Brand: Belbal B120 soap if I remember correctly.
                Smell: No strange smell after the baking. During the baking there is a very present nasty chemical rubber smell for sure so ventilate the area if possible.

                And the inflation is as you say, fresh balloon, 4 breaths, rack.

                Did some others earlier this week (testing with some opaque Q16's) that I just inflated to roughly max rated size once and deflated then baked. Not sure if this has better or worse effect, did not get to testing that yet.

                Comment

                • bigloonfucker.cz
                  Punk member
                  • Nov 2023
                  • 145

                  #23
                  It's good to use the fan baking mode instead of clear heating. The softening with fan is more consistent. I found that the half of balloon with neck softens faster, so for better result i direct balloons butt face to air flow. Always using clear baking paper to avoid any oil. And as said here: when you take the volume of baloon just before any stretching, so I inflate only by half of this, tie, and watch loon all baking time as it grows. When baloon would start to stretch in oven, immediately pops. And it is not target.
                  I bake at 150°C 3mins thinner and 5-7mins thicker ones. Better to inflate loon when still hot. 160°C using only to shorten time at the end when hurry. Ventillation of kitchen is necessary (when you are not a fan of that f*cking smell). It's hard to explain to anybody whats your masterpiece in oven
                  Last edited by bigloonfucker.cz; 30-03-2024, 16:47.
                  The softer balloon the better. When not soft enough, I bake him untill success

                  Comment

                  • nonpop
                    Soft balloons first
                    • Jul 2024
                    • 104

                    #24
                    It's a matter of time and temperature and use baking sheets(paper) to avoid the too warm metal to touch the ballons directly. But as mentioned in another thread here. I always get the best result when I leave the balloons in for longer time, with lower temperatures. About 2h at 100 degrees celsius works nicely, but it will be different on different ovens and balloon brands.

                    Comment

                    • bigloonfucker.cz
                      Punk member
                      • Nov 2023
                      • 145

                      #25
                      Yeah, it's better to use lower temp (to avoid melting) with longer time. The lower temp the more consistent improving of balloon and better stamina. it pays to be patient
                      The softer balloon the better. When not soft enough, I bake him untill success

                      Comment

                      Working...