Inflating to a full size … how?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Blueballoondude89
    Senior Member
    • Apr 2022
    • 240

    Inflating to a full size … how?

    Yesterday I went to the party store and got a bunch of 11 inch Qualatex filled up (since of course nobody will let me fill my tank ) and they were filled up to at least 12 inches. Nice and full sized. Any time I try and get it to that, just one more puff and BANG!!!! It’s so annoying. Even when it’s barely to full size, BANG. But the Party City people can do it no problem!

    Is there a tip on not being so afraid? My balloons never look nice and full no matter how hard I try. Even if I think it’s a good size, the Party City people do it way better. Although sometimes they go a bit undersized and they’re barely floating up right with hi float. I remember going to a florist once and I got a 16 inch but she only inflated it to like 13 or 14. Seriously?
  • Felicity Fuxs
    Senior Member
    • Jul 2022
    • 208

    #2
    Re: Inflating to a full size … how?

    pre stretching or inflating a few times beforehand can help, also the machines used if set up correctly deliver the exact amount of air or helium for the balloon size.

    Comment

    • Blueballoondude89
      Senior Member
      • Apr 2022
      • 240

      #3
      Re: Inflating to a full size … how?

      I remember a party shop back in 2009-2011 had the machines that would blow them up to EXACTLY 11 inch, no bigger. It was so incredibly frustrating that the lady refused to blow it up to a slightly fuller size. And no Hi float either!

      Comment

      • LoonerHoax
        Senior Member
        • May 2020
        • 521

        #4
        Re: Inflating to a full size … how?

        I had some Q24s inflated at Party City and had to tell them to make them bigger. Same with the Q16s I had inflated at the same time. I would have filled them myself but I didn't have a helium tank at the time. It probably would have been about the same cost...

        Comment

        • SweetBouncer
          Senior Member
          • Mar 2020
          • 218

          #5
          Re: Inflating to a full size … how?

          The key is keep the volume constant and the speed/pressure low, it will take a long time, but the latex will stretch slowly and nicely. That and a little control of the temperature will allow you to get your balloons nice and big.

          Comment

          • SusieDK
            Senior Member
            • Dec 2017
            • 203

            #6
            Re: Inflating to a full size … how?

            For what it is worth; here are my experiences with some of the balloons I have. These are Qualatex 11”, Belbal 14” and Tuftex 14”.

            All three kinds are very reliable, and it is safe to blow them up until the neck is all full - meaning there is no uninflated part left. The balloons look as if they cannot take more, but they are still not especially tight, and they are not hard to tie up.
            As I practically never stop blowing at this point myself I have only little experience with how durable the balloons are after being tied. However when I :decorate for NYE I always blow them up much tighter, and most of them still last the whole evening, even though I try to blow them so tight that they will burst all by themselves at some point and make people (myself included) jump. This is btw a great opportunity to blow up ‘replacements’. Oooops! - I better get back to the issue….

            I wonder why you experience your balloons popping prematurely, but maybe you blow them up beyond being ‘only’ blown up fully - meaning no more neck left to inflate. When I blow balloons past this point they will grow sort of all over meaning the body get bigger and the neck ‘fatter’. This inevitably ends with a bang. It still takes some breaths though before this happens, but it is not possible to predict exactly how many. As an example it takes about 15 big breaths (of mine) to blow up a Belbal 14” until it is full (no uninflated part left), and then between 5 and 15 extra breaths to make the balloon go bang. No matter what there is a considerable ‘margin’ though. I usually don’t stretch the balloons before starting to blow, but this is just my way of adding a little extra unpredictability. If you strecth them they might get somewhat bigger.

            Qualatex 11” and Tuftex 14” are very much the same as Belbal, just the 11” balloons of course don’t get as big as the 14”ers, and Tuftex 14” get considerably bigger than the Belbal 14”. All are very good though.

            It is strange that you have completely different experiences, because I don’t do anything special at all - I just blow. My breaths are smaller of course, and I also don’t blow ‘violently’, but I guess you don’t either as you want the balloon to simply get really big without popping it. I want mine to pop, but I also want them to get as big as possible before that happens.

            I realise I am not of much help, but these are my experiences nevertheless.

            Have fun trying to make your balloons ‘all full’.

            Thank you for reading my posting.

            Sincerely
            Susie
            Last edited by SusieDK; 16-10-2022, 05:27.

            Comment

            • srob2
              Senior Member
              • Dec 2017
              • 552

              #7
              Re: Inflating to a full size … how?

              I enjoy the idea that a balloon might pop at any moment I am blowing, even if I am not trying to b2p. If you don't get a big enough bang, balloons are cheap, just grab another.

              If you don't enjoy this, I can understand how a few premature pops might scare you. It is impossible to pop a non-defective Qualatex 11” before it starts to neck, and very few Qualatex balloons are defective. Maybe you got an old bag or ones that were stored badly.

              If you aren't too scared, intentionally b2p a few. You will see how big most of them get.

              Comment

              • Black_Bear
                Senior Member
                • May 2013
                • 194

                #8
                Re: Inflating to a full size … how?

                This comes down to prestretching doesn't it? A Party Store usually inflates the balloons with air first to stretch it out and make sure it isn't defective. Then let the air out, Hi-Float, then helium. Balloons is stretched more and gets bigger.
                I've tried this myself with Q11s. Just preinflate with air before filling them with helium.

                Comment

                • Strel0k
                  Member
                  • Jul 2014
                  • 44

                  #9
                  Re: Inflating to a full size … how?

                  Did you bring your own balloons in? Party City doesn't carry Qualatex, they carry Amscan which do inflate bigger than Qualatex.

                  Comment

                  • Blueballoondude89
                    Senior Member
                    • Apr 2022
                    • 240

                    #10
                    Re: Inflating to a full size … how?

                    Originally posted by Strel0k
                    Did you bring your own balloons in? Party City doesn't carry Qualatex, they carry Amscan which do inflate bigger than Qualatex.
                    Yeah I brought my own. Funnily enough, the one near me actually has Qualatex Chrome and even Rose gold in bulk. This was even before Amscan came out with their metallic chrome and rose gold. And they also have the 12 inch BSA/Pioneer in bulk. They had some Happy 60th Birthday prints (they also have different ages) and naturally I got those blown up for my aunt’s birthday party lol. I swear they also had the black and white superagates at one point.

                    Yes they still have the regular 12 inch Uniques/Amscans among the Pioneer.
                    Last edited by Blueballoondude89; 15-10-2022, 23:54.

                    Comment

                    • heliumsitr68
                      Senior Member
                      • Nov 2021
                      • 627

                      #11
                      Re: Inflating to a full size … how?

                      Why wont anyone refill your tank ?
                      Popper ! I love helium balloons

                      Comment

                      • stretchedtight
                        Senior Member
                        • Apr 2013
                        • 275

                        #12
                        Re: Inflating to a full size … how?

                        Susie - for the extra 5 - 15 breaths till the balloon pops, do you get that breath where all of a sudden it gets very hard to blow? And if so would the next breath or two be the one that made it pop? Or do you get that 'hard to blow' breath and then it takes 5-15 more to pop it?

                        Thanks for indulging my curiosity

                        Originally posted by SusieDK

                        I wonder why you experience your balloons popping prematurely, but maybe you blow them up beyond being ‘only’ blown up fully - meaning no more neck left to inflate. When I blow balloons past this point they will grow sort of all over meaning the body get bigger and the neck ‘fatter’. This inevitably ends with a bang. It still takes some breaths though before this happens, but it is not possible to predict exactly how many. As an example it takes about 15 big breaths (of mine) to blow up a Belbal 14” until it is full (no uninflated part left), and then between 5 and 15 extra breaths to make the balloon go bang. No matter what there is a considerable ‘margin’ though. I usually don’t stretch the balloons before starting to blow, but this is just my way of adding a little extra unpredictability. If you strecth them they might get slightly bigger.

                        Qualatex 11” and Tuftex 14” are very much the same as Belbal, just the 11” balloons of course don’t get as big as the 14”ers, and Tuftex 14” get considerably bigger than the Belbal 14”. All are very good though.

                        It is strange that you have completely different experiences, because I don’t do anything special at all - I just blow. My breaths are smaller of course, and I also don’t blow ‘violently’, but I guess you don’t either as you want the balloon to simply get really big without popping it. I want mine to pop, but I also want them to get as big as possible before that happens.

                        I realise I am not of much help, but these are my experiences nevertheless.

                        Have fun trying to make your balloons ‘all full’.

                        Thank you for reading my posting.

                        Sincerely
                        Susie

                        Comment

                        • SusieDK
                          Senior Member
                          • Dec 2017
                          • 203

                          #13
                          Re: Inflating to a full size … how?

                          Originally posted by jiffy
                          Susie - for the extra 5 - 15 breaths till the balloon pops, do you get that breath where all of a sudden it gets very hard to blow? And if so would the next breath or two be the one that made it pop? Or do you get that 'hard to blow' breath and then it takes 5-15 more to pop it?

                          Thanks for indulging my curiosity
                          Hi,

                          During those extra 5 - 15 breaths the balloon gets steadily tighter. At some point it becomes so tight that it is hard(er) to push more air into it. When this happens I know the bang is only very few breaths away. This makes it even more exciting to keep blowing. I often blow slowly and carefully from there to try and make the balloon as big as at possible before the inevitable bang - and of course also to prolong the excitement.

                          Sincerely
                          Susie
                          Last edited by SusieDK; 17-10-2022, 20:54.

                          Comment

                          • zman21
                            Senior Member
                            • Jun 2022
                            • 136

                            #14
                            Re: Inflating to a full size … how?

                            That´s a very interesting topic for me too! It´s always kind of a wasted balloon for me as long as it isn´t tight. My problem is not so much that they burst before they get tight (honestly I didn´t really understand that, because they should get really huge unless they are defective or too old). My problem would rather be that I chicken out befor they reach their full capacity. Even if my balloons are necked I never really know if it is "good enough"... especially if I prestretch the neck I always feel like I didn´t go to the limit. I need a really good day for that

                            Originally posted by SusieDK
                            During those extra 5 - 15 breaths the balloon gets steadily tighter. At some point it becomes so tight that it is hard(er) to push more air into it. When this happens I know the bang is only very few breaths away. This makes it even more exciting to keep blowing. I often blow slowly and carefully from there to try and make the balloon as big as at possible before the inevitable bang - and of course also to prolong the excitement.
                            I will ALWAYS admire this!!! I´ve done a few b2ps in my life (I used to be a bit more courageous a few years ago), but I was never really able to do it that slowly!!! This tension of "waiting for the unavoidable bang" is soooo damn strong for me that it really physically stops me blowing. I wish I could learn this in small steps one day

                            (some models in videos also blow that slowly... isn´t that mega impressive?? )

                            Comment

                            Working...