Just upgraded to a proper balloon pump

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Boom&Bust
    Senior Member
    • Jan 2021
    • 111

    Just upgraded to a proper balloon pump

    Only cost £13.96 and I received it yesterday.

    I'm amazed at how fast these pumps can blow up giant balloons! It only took about 15 seconds to blow up a Tufftex 24".

    I had been using an Intex inflatable pump, but it wasn't really up to the job of pumping up balloons. I think the Intex is still worth keeping though as I like to blow up latex gloves and condoms slowly while they're pressed against me until they burst. The balloon pump would blow them up way too fast.

    The new balloon pump also blows out heat which helps with stretching the latex but there was a slight burning smell. So either this is normal and the slight burning smell is just because it's new and it'll go away, or it's faulty and maybe it's not even meant to blow out any heat at all.

    It's quite a lot louder than my Intex. But overall I'm really happy with it.

    SAM_9385.JPG
    Last edited by Boom&Bust; 10-03-2022, 11:52.
  • Eno
    Senior Member
    • Feb 2018
    • 206

    #2
    Re: Just upgraded to a proper balloon pump

    That heat is NOT normal. You have a faulty device.
    Those cheap chinese pumps are of very bad quality. I would not even let them near any power socket in my house...

    I have a Zibi balloon pump from Switzerland, but modified to be able to be used with 120 volts.

    Comment

    • PMN985
      Senior Member
      • Aug 2021
      • 115

      #3
      Re: Just upgraded to a proper balloon pump

      I have the pink one myself, it only heats if it's ran more than 40 mins, loud as hell though. I recommend ear protection if using for long periods. Lol (I use ear protection when inflating not popping lol unless a pimp 2 pop on that machine.)

      Comment

      • lukmanrewa
        Senior Member
        • Jun 2012
        • 491

        #4
        Re: Just upgraded to a proper balloon pump

        I also own The Intex and the sound itself is loud, I thought the chinese ones were not as loud as the Intex

        Comment

        • Scaredyburst
          Senior Member
          • Dec 2020
          • 107

          #5
          Re: Just upgraded to a proper balloon pump

          Originally posted by Boom&Bust
          Only cost around £11 and I received it yesterday.

          Wow - that seems a very good price. Where did you get it from?
          🎈📌💥 🐕 🐖

          Comment

          • Nopops4me
            Senior Member
            • Jun 2015
            • 976

            #6
            Re: Just upgraded to a proper balloon pump

            Yeah Boom&Bust, that does seem a cheap price for that pump as in the picture. Are you sure it's not secondhand, the box lid doesn't look that new, as though you got it on maybe e-bay or similar. And have you checked the voltage label on your pump, that the voltage is correct for the UK system. If it smells of burning, I wouldn't use it. Send it back.
            It would be good if you let us know how you get on, so that the rest of us can maybe steer clear of that make of balloon pump. Cheers

            Comment

            • Boom&Bust
              Senior Member
              • Jan 2021
              • 111

              #7
              Re: Just upgraded to a proper balloon pump

              Originally posted by Scaredyburst
              Wow - that seems a very good price. Where did you get it from?
              I got it from ebay. I made a mistake by saying it cost around £11, it actually cost me £13.96.
              Last edited by Boom&Bust; 10-03-2022, 11:53.

              Comment

              • Boom&Bust
                Senior Member
                • Jan 2021
                • 111

                #8
                Re: Just upgraded to a proper balloon pump

                Originally posted by Nopops4me
                Yeah Boom&Bust, that does seem a cheap price for that pump as in the picture. Are you sure it's not secondhand, the box lid doesn't look that new, as though you got it on maybe e-bay or similar. And have you checked the voltage label on your pump, that the voltage is correct for the UK system. If it smells of burning, I wouldn't use it. Send it back.
                It would be good if you let us know how you get on, so that the rest of us can maybe steer clear of that make of balloon pump. Cheers
                The pump says 220V - 240V which is fine for the UK.

                A lot of Chinese things that are brand new come in bashed up boxes. It's possible that the pump could be second hand, but it does say on the ebay page that it's brand new, and it did seem brand new when taking it out of the box.

                Here is the ebay page: https://www.ebay.co.uk/itm/373931025...53.m2749.l2649

                I will let you guys know how I get on with it. I don't always smell burning from it, and when I do the smell isn't strong.

                My vacuum cleaner which I bought brand new from the supermarket which isn't Chinese or a cheap make will sometimes get hot and there will be a slight burning smell from it, I think it might only be when the filter needs cleaning.

                I've had it for a long time now and the smell has never gone any worse, and it doesn't happen more often either.

                A lot of people online have complained about it, so I'm guessing all of these vacuum cleaners are like this and it's normal?

                That's why I'm not too concerned about the pump. But, if I ever do see any smoke start to come from it (which may never happen), I'll be chucking it outside and throwing some water over it and then into the bin it goes.
                Last edited by Boom&Bust; 10-03-2022, 11:53.

                Comment

                • Boom&Bust
                  Senior Member
                  • Jan 2021
                  • 111

                  #9
                  Re: Just upgraded to a proper balloon pump

                  The plastic has these indentations which give it a slightly melted cheap plastic look.

                  SAM_9426.JPG

                  Also, when taking it out of the box for the first time, one of the plastic nubs on the door was broken off. I super glued it back on, and then to get both nubs into the holes to fit the door on, I had to flex the door. But now it's fine.

                  So overall, these pumps do seem like cheap quality. Just thought I'd mention these things for anyone thinking about getting one.

                  SAM_9422a.jpg

                  SAM_9420.JPG

                  SAM_9423.JPG
                  Last edited by Boom&Bust; 10-03-2022, 12:37.

                  Comment

                  • aron_crow
                    Senior Member
                    • May 2020
                    • 171

                    #10
                    Re: Just upgraded to a proper balloon pump

                    Originally posted by Boom&Bust
                    Only cost £13.96 and I received it yesterday.

                    I'm amazed at how fast these pumps can blow up giant balloons! It only took about 15 seconds to blow up a Tufftex 24".

                    I had been using an Intex inflatable pump, but it wasn't really up to the job of pumping up balloons. I think the Intex is still worth keeping though as I like to blow up latex gloves and condoms slowly while they're pressed against me until they burst. The balloon pump would blow them up way too fast.

                    The new balloon pump also blows out heat which helps with stretching the latex but there was a slight burning smell. So either this is normal and the slight burning smell is just because it's new and it'll go away, or it's faulty and maybe it's not even meant to blow out any heat at all.

                    It's quite a lot louder than my Intex. But overall I'm really happy with it.

                    [ATTACH]2143[/ATTACH]
                    I am surprised that you get these cheap Chinese pumps near where you live. They cost us nearly Rs 1000 or about 10 pounds. The larger blue ones with 4 output valves cost us near 13 pounds.
                    Strong word of advice from a long time user of these, they are rubbish. They make a lot of noise and generate too much heat. I have them overheating 5 mins from using them to inflate tiny 9" balloons. Also, they are not gradual inflators so they will accidently burst your balloon, either due to the heat or the rapid inflation.
                    Last edited by aron_crow; 12-03-2022, 14:00. Reason: Change

                    Comment

                    • Frustrated blower
                      Member
                      • Dec 2021
                      • 48

                      #11
                      Re: Just upgraded to a proper balloon pump

                      Has anyone used aquarium pumps? I'm still looking for a quiet way to pump my larger loons, and at one time I remember reading about someone using the larger aquarium pumps, but you had to combine the ports into one line.

                      Comment

                      • Yea
                        Me Too
                        • May 2019
                        • 12

                        #12
                        Re: Just upgraded to a proper balloon pump

                        Hello, i got an aquarium pump for similar reasons mine is 5L/M takes an hour + to fill 36 inch
                        Thats with combined lines most are smalled then 5 but im sure there are larger just get very expensive

                        Comment

                        Working...