Where is your limit?? How big do you dare?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Asclepio
    Senior Member
    • Sep 2018
    • 539

    Where is your limit?? How big do you dare?

    Ok this is as big as I dare to blow a tuftex 17”.
    Normally I push my tuftex loons very overinflated but this time I began to blow them since mid day, I let them just a little overinflated and started to add 2 breaths from that point every 20 minutes, that way the latex had time to accept the excessive amount of air I was putting into it. At one point I def believed the balloons would be popping but they hold the pressure very well. Im sure they are very near of the limit since they are pretty much like rock hard. I measured them and they are 21.5” and I cant be happier about it, but I need to accept that this is my limit, I cant go further without risking too much. I will let them inflated for the night but damn Im scared of them…..
    Attached Files
    A looner looking for fun, against violence or people with hightened moral idealism…. I just care about loons, so don’t ruin the fun.
  • Common Loon
    Senior Member
    • Aug 2020
    • 232

    #2
    Re: Where is your limit?? How big do you dare?

    My money is on the blue one... the red one looks like it might not last the night

    Comment

    • Guest

      #3
      Re: Where is your limit?? How big do you dare?

      Oh,wow! They almost look like tt24s! Just let em beee!! Let em stretch throughout the whole night and revisit them tomorrow morning if they survive, lol!! Bless those beautiful balloons!!

      Comment

      • gerbil366@outlook.com
        Senior Member
        • Dec 2020
        • 133

        #4
        Re: Where is your limit?? How big do you dare?

        i blow up tt24 balloons as tight as that quite often , sometimes to the limit of popping

        Comment

        • Guest

          #5
          Re: Where is your limit?? How big do you dare?

          Originally posted by gerbil366@outlook.com
          i blow up tt24 balloons as tight as that quite often , sometimes to the limit of popping
          I usually blow up my tufftex 24s past their rated size until they neck out before riding and humping...being that I'm 5'8 and only 130 pounds they can stand up to tremendous punishment from me! But to blow a tt24 to the limit! It's scary! They get so BIG before getting tight! But awesome nonetheless if one has the courage!

          Comment

          • RubberTech
            Member
            • Jan 2022
            • 51

            #6
            Re: Where is your limit?? How big do you dare?

            I can get a Qualatex 36" up to about 40 inches before I can feel the latex beginning to plasticize at which point I know it has reached its limit. I can also tell that the air pressure begins to increase at this point and the balloon stops growing in diameter as rapidly. When I get a new type of balloon and I'm not familiar with its properties, I will attach a homemade nozzle with a one way valve that I made from 5/8" tubing and a 5/8" perma tex one way valve to a fresh, new balloon. This holds the balloon solidly by the ring on the mouth piece which allows it to expand to its maximum including the neck without fingers getting in the way. I then count the number of breaths it takes to blow the balloon to its max and pop it. I stop after about 20 breaths or so and examine the latex for flaws and feel the tightness or surface tension of the balloon at different locations to determine if the latex is nearing its limit. Once the balloon has reached its rated size I give it five breaths at a time and re-examine along with taking a measurement to see what the diameter is up to. Some balloons like the Q36 don't really expand into the neck unless you pre-stretch the neck first while others will easily start to neck out. This is really determined by the mold that was used to make the balloon and the shape of it. By determining the nature of each ballon this way you can learn exactly how to inflate each one right to its limit without popping it. Of course accidents always happen and sometimes a flaw or an old balloon that has begun to degrade will pop before even reaching its rated size but if you check carefully you can usually figure this out by examining the balloon along the way. The biggest I have been able to get a fresh new Q36 to is 43". I can usually get the Olympic 45" Russian balloons to 52" with a completed inflated neck and the Amscan 24" balloons will reach 32" although they are poorly manufactured and so only about 1 in 4 will reach this size.

            Comment

            • JCB
              Senior Member
              • Feb 2021
              • 323

              #7
              Re: Where is your limit?? How big do you dare?

              I love to blow TT24's really big & tight. I inflated,stretched & deflated neck 40 times before fully inflating it got a gorgeous terrific neck on it.

              Comment

              • Guest

                #8
                Re: Where is your limit?? How big do you dare?

                I think 24's are the biggest. Not because I get uncomfortable with bigger or such its just that over or under a certain size I kinda loose interest in the balloons for some weird reason.

                Comment

                • gerbil366@outlook.com
                  Senior Member
                  • Dec 2020
                  • 133

                  #9
                  Re: Where is your limit?? How big do you dare?

                  My limit is when they pop because u can’t blow any more

                  Comment

                  • Blowitbig
                    Senior Member
                    • Jan 2016
                    • 825

                    #10
                    Re: Where is your limit?? How big do you dare?

                    About 2 breaths before the pop, the balloon gets soooo hard
                    The bigger the better

                    Comment

                    • zman21
                      Senior Member
                      • Jun 2022
                      • 136

                      #11
                      Originally posted by Asclepio
                      Ok this is as big as I dare to blow a tuftex 17”.
                      Normally I push my tuftex loons very overinflated but this time I began to blow them since mid day, I let them just a little overinflated and started to add 2 breaths from that point every 20 minutes, that way the latex had time to accept the excessive amount of air I was putting into it. At one point I def believed the balloons would be popping but they hold the pressure very well. Im sure they are very near of the limit since they are pretty much like rock hard. I measured them and they are 21.5” and I cant be happier about it, but I need to accept that this is my limit, I cant go further without risking too much. I will let them inflated for the night but damn Im scared of them…..
                      They looked absolutely amazing!!! 21,5" is a lot for a TT17 - that´s very impressive! I assume they have been inflated for the first time? Multiple inflations should give even "better" results in terms of size. But only a fresh balloon gets this rock hard of course. This picture makes me wanna try some TT17 too :P

                      Comment

                      • Guest

                        #12
                        18=32 with long necks ,Usually when the neck is fully inflated and near my face and I can see in the mirror how big the bulb is and I wonder should I stop no2 or can it take a bit more
                        don't stop till it goes pop

                        Comment

                        Working...