Stenciling designs onto balloons

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • OverTheTop
    Senior Member
    • Dec 2013
    • 749

    Stenciling designs onto balloons

    I couldn't find a GL700 with the print I wanted online, and custom printed balloons - especially non-standard ones - are expensive. So, I found a similar design online, cut it out, and stenciled it onto a pink GL700 with a sharpie.

    (My apologies in advance for blurry pictures!)

    The base image: here

    After cutting it out (I skipped facial details, too small...)


    Tracing with sharpie...


    The result!


    ...and inflated!


    Overall it worked pretty well for a first attempt. It came out smaller than I had hoped, and I had to retrace the lines once (too light before) but other than that it looks really nice
  • OverTheTop
    Senior Member
    • Dec 2013
    • 749

    #2
    Re: Stenciling designs onto balloons

    Originally posted by lyckr
    This is why balloons are usually at least partially inflated before the print is applied. You would need a bigger sheet of paper if you were to do that with a GL700 though
    The problem with doing that with a sharpie is that when it deflates, the ink comes off and makes a mess :/

    Next time I'll probably just use a larger stencil and trace it twice, or trace it, inflate it, deflate it, and retrace it (like I did this time)

    Comment

    • Jkloon
      Senior Member
      • Aug 2013
      • 357

      #3
      Re: Stenciling designs onto balloons

      I never thought of that. I'll have to give it a try!

      Comment

      • SRob
        Member
        • Aug 2015
        • 38

        #4
        Re: Stenciling designs onto balloons

        You could stencil uninflated, then trace once it is mostly blown up. Better for popping if you worry about the ink making a mess.

        Comment

        • OverTheTop
          Senior Member
          • Dec 2013
          • 749

          #5
          Re: Stenciling designs onto balloons

          Originally posted by Jkloon
          I never thought of that. I'll have to give it a try!
          Definitely do try it! It looks pretty great and took about an hour total for me!

          Originally posted by SRob
          You could stencil uninflated, then trace once it is mostly blown up. Better for popping if you worry about the ink making a mess.
          The problem with that is that the pen can pop balloons if you're not careful. When deflating a balloon, it doesn't fully deflate (it's still stretched out) so I just traced it after one inflation, which worked perfectly.

          I think for my next try I'm going to 3D print the stencil so A) I don't have to manually cut it out and B) I can get a lot more fine details in. I'll probably also trace it two or three times before I inflate the balloon, so that it comes out darker the first time.

          Comment

          • LucyWants2POP
            Junior Member
            • Feb 2015
            • 14

            #6
            Re: Stenciling designs onto balloons

            That is seriously awesome. Now I want to do this!

            Comment

            • OverTheTop
              Senior Member
              • Dec 2013
              • 749

              #7
              Re: Stenciling designs onto balloons

              Originally posted by LucyWants2POP
              That is seriously awesome. Now I want to do this!
              It's really easy too! Just find a good stencil, scale it in Microsoft Word or another program, print, cut, and trace!

              Comment

              • BigBang123
                Member
                • Aug 2015
                • 71

                #8
                Re: Stenciling designs onto balloons

                Id thought I would give it ago but I think I have gone to far :/
                It's a GL1200 btw
                Attached Files

                Comment

                • OverTheTop
                  Senior Member
                  • Dec 2013
                  • 749

                  #9
                  Re: Stenciling designs onto balloons

                  Originally posted by BigBang123
                  Id thought I would give it ago but I think I have gone to far :/
                  It's a GL1200 btw
                  Nice, that looks like a fun design :P

                  Did you do it by hand? I think it came out well from the pics.

                  Comment

                  • BigBang123
                    Member
                    • Aug 2015
                    • 71

                    #10
                    Re: Stenciling designs onto balloons

                    Originally posted by OverTheTop
                    Nice, that looks like a fun design :P

                    Did you do it by hand? I think it came out well from the pics.
                    I did it by hand but I'm not sure why I did it at all i think I was just bored

                    Comment

                    • Bubble Boy :-P

                      #11
                      Re: Stenciling designs onto balloons

                      Ha,ha! I love it!!!!

                      Comment

                      • Tiger-Nick
                        Junior Member
                        • Aug 2016
                        • 1

                        #12
                        Re: Stenciling designs onto balloons

                        Sorry to bring back an old thread,

                        But I'm actually playing with screen printing on balloons. I've always loved big printed balloons, and I wanted a few prints of my own. I'm doing this in my shop, so small quantity (Not 1000's like some printers require) and I can print whatever I want.

                        I'm not sure if I can do long balloons, but I'm pringing round ones (16", 24" and 36") and selling them on my Etsy shop.

                        Right now I'm catering to the Furry Balloon Fetishists, but open to anything! I've got an Etsy shop. take a look!

                        Shop Printing BIG Custom Balloons! by PrintedBalloons located in Kalamazoo, Michigan.


                        Thanks
                        -Tiger Nick

                        Comment

                        Working...