natural latex degradation

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • balloonPatcher
    Senior Member
    • Jun 2020
    • 291

    natural latex degradation

    Most information about this topic seems to be about oxidative and UV degradation. As we all know long term exposure to UV light (sunlight) and
    to air - oxygen, the latex gets softer/weaker and stickier. This is thought to be from long-chain and cross-linkage breakage.
    Another damage type from oxidation is hardening of the latex. This is thought to cause by cross-linkage formation again due to oxidation.

    There is also fungal degradation. Raw latex producers lose a significant portion of their latex harvest to Aspergillus niger fungus 'eating' the latex.
    As you know you can inflate/deflate a balloon once and come back later to find that it has many weak thinned areas on re-inflation. Could it be that the moisture has allowed the fungus to grow and eat the latex?
    If this is the case then, short term inflation/deflation by mouth should not be a problem. Regular inflation perhaps could even inhibit the growth of the fungus.
    So, drying the inside of the balloon latex before storage.
    Rinsing with an antifungal agent such as dilute bleach or 70% alcohol.
    chlorinating the latex.
    Storage in cold temperatures for example the freezer.
    A very geeky topic but I would like to know more.

    Please post your thoughts and comments.
  • panther42
    Member
    • Oct 2021
    • 42

    #2
    Re: natural latex degradation

    Following. I admit to having no knowledge/ experience to add to this. Just of curiosity, particularly on the subject of moisture exposure from mouth inflation.

    balloonPatcher you mention drying balloons before storage.
    I sometimes make a half-hearted attempt at this by rolling a normal facial tissue up into a sort-of soda straw shape, sliding it in through the balloon's neck, and rolling the balloon around over it. This absorbs some moisture from the inside.

    What are practical (read, easy, not time consuming) ways to dry the inside of the balloon after deflation after mouth inflation, without leaving noticeable residue inside the balloon (many years ago someone in the Balloon Buddies mentioned dropping in some talcum powder, which would leave residue, and which in more recent years we've come to understand is a very bad thing to breathe in).

    Comment

    • AJK64
      Moderator
      • Jun 2018
      • 1280

      #3
      Re: natural latex degradation

      When I used to mouth inflate my balloons for reuse I would turn the balloon inside out after deflating it and dry it with a tissue or place them on a radiator in the winter for 20 minutes (again inside out), I would then store them in plastic boxes that had silica gel packets in to absorb any moisture inside.
      Last edited by AJK64; 01-11-2021, 11:12.

      Comment

      Working...