Best way to blow balloons

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    Best way to blow balloons

    Hello everyone, this is my first thread and I am so excited.
    First thing to do is to thank you, for accepting me in this wonderful community.

    Now my question is:what is your favorite way to blow up a balloon?
    Personally I only blow up balloons with my mouth, because I love to feel the taste of the balloon, even the smell of laatex mixed with saliva turn me on a lot.

    What about you? Mouth or pump? And why?
  • glovepopper
    Senior Member
    • May 2019
    • 390

    #2
    Re: Best way to blow balloons

    I pre-inflate with an electric pump and then blow with my mouth. This way I avoid water condensation on the balloon walls.

    Comment

    • BallonBTP
      Member
      • Apr 2020
      • 38

      #3
      Re: Best way to blow balloons

      It depends on what the balloons are meant for. If they are to be used as decoration I use a pump (mine is electric), because the balloons are prettier when blown up with dry air. For all other purposes I prefer blowing them up by mouth, as this seems to me as the natural way to blow up balloons - probably because this is how balloons were always inflated when I was little (and totally phobic of balloons). It also means something that the thrill of blowing up a balloon is enhanced by knowing that it is going to burst directly into my face.
      Now and then I use the pump to blow up bigger balloons (16” and up) until the neck start to show. This leaves only the most exciting part of the inflation to be done by mouth.

      Greetings.
      BallonBTP

      Comment

      • Common Loon
        Senior Member
        • Aug 2020
        • 232

        #4
        Re: Best way to blow balloons

        Yeah @BallonBTP makes a good point... it really does depend on the situation.

        I'm kind of obsessive about always having a good pump handy, mainly for decor work where I'm either inflating large quantities or large balloons. It's also good for air-stretching balloons before they're helium filled. Wouldn't want to use your wet breath for that, especially if there's hi-float in them.

        But almost anytime I'm inflating just for fun, mouth inflation is still tops. It's a big part of the magic of balloons for me, the fact that you can walk around with balloons in your pocket and no matter where you are, you can have big shiny orbs with no technology or electricity needed. Plus I do feel safer inflating by mouth often because it's slower than a pump and gives you the ability to gauge your progress more carefully. Not to mention, there's a wonderful intimacy to all the tactile sensations of blowing up a balloon by mouth, and to watching someone else do the same, that's irreplaceable.

        Also sometimes I'll mouth inflate when doing informal deco work because it's quicker for me to meter my breaths than to accurately size balloons using a pump. For example, I know that two deep breaths for me will fill an 11" balloon to about 8.5", and it's far quicker to do that for a dozen balloons in a row compared to using a pump and then having to measure the size using a sizing tool.

        Comment

        • panther42
          Member
          • Oct 2021
          • 42

          #5
          Re: Best way to blow balloons

          Originally posted by glovepopper
          I pre-inflate with an electric pump and then blow with my mouth. This way I avoid water condensation on the balloon walls.
          For any balloon that I expect to deflate and keep for later, I use a pump (whether manual or electric), for the reason that glovepopper mentions - to avoid moisture inside the balloon.

          What I've found over the years is that any balloon exposed to moisture (particularly, put away wet [insert bad horsemanship joke here] inside) sticks together and - I assume - degrades much more quickly.
          {I was surprised recently to notice that a balloon which I'd inflated only using a pump seemed to get similarly sticky (of course I don't recall what brand and size it was, sorry)}}.

          Which leads to the questions:
          * just how much faster/worse does a balloon degrade having been inflated by mouth (from the start); and
          * if a balloon is pump-inflated to more-or-less its rated size and then mouth inflated some more, how much moisture does that put in to the balloon/ how much future degradation does that cause?

          thanks for your thoughts,

          Comment

          • balloonPatcher
            Senior Member
            • Jun 2020
            • 291

            #6
            Re: Best way to blow balloons

            I will start a new thread on the topic of moisture and latex regarding degradation of the rubber.

            Comment

            • randomlooner316
              Senior Member
              • Apr 2021
              • 146

              #7
              Re: Best way to blow balloons

              I like by mouth mostly except during the phase I was shoving action figures into balloons. The moisture was bad for the paint on the figure so I'd use a pump.

              Comment

              • Black_Bear
                Senior Member
                • May 2013
                • 194

                #8
                Re: Best way to blow balloons

                This is an interesting topic. I get asked a lot how I get all of my Qualatex 16", Tuftex 17", and Kalisan 18" Balloons to shred into a million pieces all the time when I b2p them. My success rate for getting lots of tiny shreds is extremely high.

                1. I only use Qualatex Balloons that are 3 years old or newer. I only use Tuftex Balloons that are 1.5 years or newer. Kalisan was just introduced to North America, so all of mine are less than 1 years old. You want the latex to get as hard as possible when you b2p them.

                2. I'm picky with which Balloons I take from the bags. I grab the balloons with the strongest rolled lips, and the balloons that feel the thickest. I then only stretch the balloons while uninflated. The ones that stretch the least, perform the best for b2p shreds.

                3. I never mouth inflate my balloons for the entire inflation, until the very end. So it's always my electric pump until their necks are fully inflated. What this does is causes the latex to be even tighter than if I used my mouth. So when I take them off the pump to then finish with my breath. The Latex will still be almost completely dry when they explode. It also makes the latex in the balloons super smooth and clear. Especially the Crystal colors as they stay super see thru right up until that moment they go boom. I love that about my method. Because the balloons have a nicer clean look to them when they are being blown up too big, but it also makes them shatter so well when they finally explode from the b2p.

                4. I only love the shreds b2p causes on those 3 balloon brands in those sizes. That's it. So I found a method that makes me happy, and I get what I want out of it.

                Comment

                • Mutaloon
                  Senior Member
                  • Nov 2018
                  • 315

                  #9
                  Re: Best way to blow balloons

                  I prefer to use a pump to inflate balloons in general. Though I like to blow up balloons by mouth if it's a larger balloon like a 24" or larger. I like to hug and squeeze them as I blow them up.

                  Comment

                  Working...