Balloon Math

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Katielynn
    Expert Blower
    • May 2012
    • 177

    Balloon Math

    Ok, I'm totally letting my nerd flag fly here; but how many breaths does it take to blow up 1" of balloon? I assumed that one breath equalled about 1" of inflation. In other words, if you had asked me if I could btp a 12" balloon in 12 breaths or less, I would have said Yes..

    But last night, I kept count as I blew up my balloons and it took a lot more breaths to burst them that I thought. By 10 or 12 deep breaths, the balloons were tight and looked "full", but the number required to pop them ranged from 13 to 24, with an average of 18, or about 1.5 breaths per rated inch of balloon.

    Anyone wanna get their geek on and compare notes?
    I love to hear the BOOM!
  • Bubble Boy :-P

    #2
    Re: Balloon Math

    Hmmm... I'm intrigued...ive never actually counted breaths to see what it takes to fill the balloon...i will consult with one of my QA 16s on this critical balloon research ��

    Comment

    • Bubble Boy :-P

      #3
      Re: Balloon Math

      16 breaths into a Q16 before I got scared lol! One more breath & it would have been curtains for that balloon....Q16s always get difficult to blow after a certain point though...

      Comment

      • Jkloon
        Senior Member
        • Aug 2013
        • 357

        #4
        Re: Balloon Math

        Also, some people have a much higher lung volume. For example, mine is about 7000 cubic millimetres (not sure how accurate the machine was, but that's my reading) whereas most of my class had a volume of around 3000. Additionally, air is compressible. When you inflate a balloon, when you let go, it deflates because the air pressure inside the balloon is higher than the air pressure outside. One cubic inch of air at STP may be only 1/2 a cubic inch in the balloon.

        (Chemistry student. Letting my inner nerd out. Not sure if that makes any sense)

        Comment

        • Ash_738
          Member
          • Jun 2013
          • 84

          #5
          Re: Balloon Math

          Unfortunately I can't blow up any balloons to find out for myself right now as there are other people in the house and will be for a few days, but it did get me thinking...

          I should say beforehand that I'm certainly no mathematician and this could be completely wrong but I'll give it a go anyway.

          I'm going to assume a spherical balloon because although most balloons aren't spherical it's far easier on my brain, and an average volume of air per breath of 4200 cubic centimetres (Wikipedia average vital capacity for a male rounded down a bit, again for easy numbers).

          Volume of a sphere = 4/3pi x r^3

          Then we can rearrange it to find the radius from the volume - V/(4/3pi)^(1/3)=r

          Now we put the numbers in - 4200/(4/3x3.14)^(0.3333)=10cm

          So 1 (very large) breath into a balloon should result in a diameter of approximately 20 centimeters which is just shy of 8" for you non-metrics. Sounds reasonable I suppose.

          As Lyckr pointed out the bigger the balloon gets the smaller the increase in size per breath, so for the second breath into said balloon the diameter is now approximately 25cm, 3rd 29cm, 5th 34cm and by the 10th breath about 43cm with the diameter only increasing by around 1.5 cm per breath at that point.

          Happily, 4200 divided by 4.19 (4/3 x pi) is near enough 1000 so we can say that the following should give you an idea of the size of your round balloon for the number of breaths you put into it:

          (No. of breaths x 1000) ^ 0.3333 x 2
          e.g. 6 x 1000 = 6000
          6000 ^ 0.3333 = 18.2 (approx.)
          18.2 × 2 = 36.4
          So 6 breaths equals roughly 36cm across.

          As Jkloon also pointed out, lung capacity varies a lot from person to person so this isn't going to be accurate for everyone.

          P.S. The effect of the higher pressure inside the balloon could *I think* reduce the volume by up to 7%, (a quick search online said about 1.1psi for a small balloon as it's about to pop to almost 0 for larger balloons which I guess sounds about right).

          Now I just have to see if real life matches the theory

          *Edited a few times to correct some mistakes.
          Last edited by Ash_738; 05-03-2015, 10:03.
          Shut up and blow!

          Comment

          • Bubble Boy :-P

            #6
            Re: Balloon Math

            Omg I stink with numbers but that is a fascinating theory! My brain just totally melted lol!

            Comment

            • LeeRider
              Senior Member
              • Nov 2014
              • 154

              #7
              Re: Balloon Math

              Originally posted by Jkloon
              Also, some people have a much higher lung volume. For example, mine is about 7000 cubic millimetres (not sure how accurate the machine was, but that's my reading) whereas most of my class had a volume of around 3000.

              (Chemistry student. Letting my inner nerd out. Not sure if that makes any sense)
              WOW! you must be good at blowing em up then!

              can you blow Q24s and Tilly 'workers'?

              looking at vids on youtube where guys inflate balloons and inflatables even those who are very good at it all seem to have different techniques.

              Comment

              • perchedontheloon
                Member
                • Dec 2014
                • 63

                #8
                Re: Balloon Math

                I just inflated a 36" balloons to the point where I would say it's pretty taut and I lost count at about 50 breaths. I'm slightly asthmatic so I might not be the best example of a consistent breath. The bronchitis also reduced the lung capacity...goodness I sound sickly. Fascinating topic though!

                Jkloon, Ash, and Katelynn gots them brains! Kudos to all of you!

                Comment

                • Ash_738
                  Member
                  • Jun 2013
                  • 84

                  #9
                  Re: Balloon Math

                  I just have too much time on my hands I think...

                  I managed to get a couple of hours alone yesterday so I took the opportunity to inflate some balloons and count but I have no clue what size these ones I have are supposed to be (around 11" I think). Here's a picture so you can judge for yourself.
                  20150305_173448.jpeg

                  Anyway, 8 big breaths to pop, and did it twice just to be sure. One in the picture is 6.
                  Last edited by Ash_738; 06-03-2015, 11:03.
                  Shut up and blow!

                  Comment

                  • LeeRider
                    Senior Member
                    • Nov 2014
                    • 154

                    #10
                    Re: Balloon Math

                    Nice neck on that whatever the size!

                    Comment

                    • JR Looner
                      Member
                      • May 2015
                      • 98

                      #11
                      Re: Balloon Math

                      Originally posted by Katielynn
                      Ok, I'm totally letting my nerd flag fly here; but how many breaths does it take to blow up 1" of balloon? I assumed that one breath equalled about 1" of inflation. In other words, if you had asked me if I could btp a 12" balloon in 12 breaths or less, I would have said Yes..

                      But last night, I kept count as I blew up my balloons and it took a lot more breaths to burst them that I thought. By 10 or 12 deep breaths, the balloons were tight and looked "full", but the number required to pop them ranged from 13 to 24, with an average of 18, or about 1.5 breaths per rated inch of balloon.

                      Anyone wanna get their geek on and compare notes?
                      I can confirm that the equation is more 'linear' when inflating an 'airship' balloon, as in the Cattex GL500. It takes me usually 40 breaths to inflate it half way, and at 80 breaths the balloon is starting to stretch at the neck.

                      I have not counted the breaths it takes to inflate a GL700, but it takes me about 15 minutes of continuous inflating. (The balloon in the photo is a GL700.)
                      Attached Files
                      Last edited by JR Looner; 21-05-2015, 02:23. Reason: Add photo

                      Comment

                      • Jkloon
                        Senior Member
                        • Aug 2013
                        • 357

                        #12
                        Re: Balloon Math

                        Originally posted by LeeRider
                        WOW! you must be good at blowing em up then!

                        can you blow Q24s and Tilly 'workers'?

                        looking at vids on youtube where guys inflate balloons and inflatables even those who are very good at it all seem to have different techniques.
                        I've never actually had a chance with either of those I really want to but can't find anywhere to buy them. I /can/ blow up a 48" beach all in about ten minutes though

                        (I meant centimetres, not millimetres)

                        I'm also a trombone player, and a swimmer. My lungs have to be good.

                        Comment

                        • LeeRider
                          Senior Member
                          • Nov 2014
                          • 154

                          #13
                          Re: Balloon Math

                          Originally posted by Jkloon
                          I've never actually had a chance with either of those I really want to but can't find anywhere to buy them. I /can/ blow up a 48" beach all in about ten minutes though

                          (I meant centimetres, not millimetres)

                          I'm also a trombone player, and a swimmer. My lungs have to be good.
                          Tilly are back in production.......try searching for "Tilly High Performance Polymers".
                          Kaboom supply Q24s and Tilly slim Jims and Workers but they dont always have em in stock....you have to keep trying!

                          Comment

                          • LeeRider
                            Senior Member
                            • Nov 2014
                            • 154

                            #14
                            Re: Balloon Math

                            Originally posted by JR Looner

                            I have not counted the breaths it takes to inflate a GL700, but it takes me about 15 minutes of continuous inflating. (The balloon in the photo is a GL700.)
                            WOW MAN!...that is HUGE!......nice blowing!

                            Comment

                            • JR Looner
                              Member
                              • May 2015
                              • 98

                              #15
                              Re: Balloon Math

                              That was the largest I was able to make a GL700. I think I inflated it once before this picture was taken. It's almost 9.5 feet long, given that the wood flooring was actually installed above the original level of the carpet by almost 4 inches.

                              Comment

                              Working...