Larger sized Geo Donuts?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • AuroraFox
    Member
    • Nov 2015
    • 62

    Larger sized Geo Donuts?

    I recently ordered a pack of 16” Geo Donut balloons to try out, and while they’re fun, my expectations fell a little short. I remember as a kid seeing them at a store display for the first time, and the ones I remember were easily 24-30” across, and about 12” thick. The 16’s don’t really live up to their name either, as they are fully inflated and pop past 12-14” depending on the colors. Searching doesn’t come up with any good results, just Mylar donut balloons. Were/are these extra large Geo Donut balloons available like I remember seeing?
  • Asclepio
    Senior Member
    • Sep 2018
    • 539

    #2
    Re: Larger sized Geo Donuts?

    Never seen anything like that, every geo donut since my childhood is at the best 16” (being qualatex 16” means something closer to 14”) so nope, hope you find them soon
    A looner looking for fun, against violence or people with hightened moral idealism…. I just care about loons, so don’t ruin the fun.

    Comment

    • Loonorm
      Senior Member
      • Mar 2019
      • 450

      #3
      Re: Larger sized Geo Donuts?

      I have found that through numerous inflation/deflation of the 16” GEOs, and stretching (pulling on) the end of the balloon while inflating with an electric pump, the donut gets bigger than rated. You can also get the hole smaller (tighter) while doing this also. Makes it more fun for obvious reasons!

      Comment

      • SAF
        Senior Member
        • Nov 2019
        • 168

        #4
        Re: Larger sized Geo Donuts?

        I saw some 36" donut once but they where not Qualatex. I think Qualatex sued whoever made them because they have a patent on the geo balloons.

        Comment

        • JamesPopper
          Senior Member
          • Nov 2016
          • 143

          #5
          Re: Larger sized Geo Donuts?

          To address the elephant in the room, what sort of black magic do they use to make them, a mold seems to not be feasible

          Comment

          • AuroraFox
            Member
            • Nov 2015
            • 62

            #6
            Re: Larger sized Geo Donuts?

            Originally posted by Loonorm
            I have found that through numerous inflation/deflation of the 16” GEOs, and stretching (pulling on) the end of the balloon while inflating with an electric pump, the donut gets bigger than rated. You can also get the hole smaller (tighter) while doing this also. Makes it more fun for obvious reasons!
            Yeah, I gave that a shot yesterday and got it a little bigger, but it popped pretty easily after being handled, err, roughly. The overall size isn’t really what bothers me, it’s the thickness...I’m fairly well endowed and the depth is sort of lacking, LOL. The extra depth would just come with a larger size, naturally.

            Originally posted by Burg
            You know what? Fuck it, I'm going to do what I can and contact qualatex on this topic. I wont request to have any manufactured; that's a little unrealistic to just request. However I will inquire why larger sizes dont exist. I'll keep this thread updated on what I find. If anything at all. Probably nothing though, idk.
            I’d be curious to hear the reply, and if they’ve ever previously made them before.

            Comment

            • Seidenki
              Senior Member
              • Dec 2016
              • 202

              #7
              Re: Larger sized Geo Donuts?

              Originally posted by JamesPopper
              To address the elephant in the room, what sort of black magic do they use to make them, a mold seems to not be feasible
              I read somewhere they glue a seam together. Which would be part of why they patented the design.

              Comment

              • npratt
                Member
                • Jul 2016
                • 88

                #8
                Re: Larger sized Geo Donuts?

                Somewhere I have a copy of the patent drawings for the geo and donut molds (posted on C&B back in the dialup era). The mold is hinged and comes apart so the balloon can be stripped. Look along the part of the balloon opposite of the neck and you can maybe see a little mark where the mold halves came together.

                Comment

                • BigBreathless
                  Senior Member
                  • Jun 2017
                  • 131

                  #9
                  Re: Larger sized Geo Donuts?

                  You can create something like a donut by using a gl700 and pushing the end through the nozzle, then attaching them together. Similar to the elusive balloon pussy design. The tunnel is way deeper and the balloon longer, but you can go to town on that thing! You can add a pocket pussy into the tunnel for some nice realistic feel. The gl800 and gl900 are too big for this I found, the gl1200 might work. Couldn´t try it with that since mine is old and I don´t wanna break it

                  Comment

                  • TooBigToFail
                    Member
                    • Feb 2019
                    • 30

                    #10
                    Re: Larger sized Geo Donuts?

                    Originally posted by Burg
                    Got a reply back from the director of product development at qualatex:

                    "Thank You for sending in this conversation topic. Even though we do not have any immediate plans for additional Geo sizes, we always keep suggestions and requests on file for future use or research needs. If you have any suggestions on what type of larger sizes or what you would use the larger sizes to create, we would be interested in adding that information to our file. You can always email me with this type of information or future product requests so that we have a better understanding of needs and the ways they could be used to help determine production requirements."

                    What do you guys think?
                    Eh, it's going to be like the Q24 fiasco. Outside of looners, not many are going to have use for a 36" donut. So, why would Qualatex want to produce something that produces very interesting search engine results? At least they have plausible deniability with Q16s and Q36s...

                    Comment

                    • AuroraFox
                      Member
                      • Nov 2015
                      • 62

                      #11
                      Re: Larger sized Geo Donuts?

                      I doubt they’re concerned about things like that, otherwise why would the 16” donuts exist? It’s pretty obvious what they can resemble or theoretically be used for even with a non-looner mentality.

                      The reply back is good overall, at least they leave the door open to suggestions. Although, I’m not sure how you’d want to word the reason for needing larger ones, lol.

                      Comment

                      • TooBigToFail
                        Member
                        • Feb 2019
                        • 30

                        #12
                        Re: Larger sized Geo Donuts?

                        Originally posted by Burg
                        Theres absolutely no way balloon manufacturers dont know about us, I'm almost positive that the simple fact I emailed asking this question in the first place gave it away, so the fact a reply was given with at least a slight interest to continue a dialogue says something.

                        Unless I'm delusional or naive
                        They don't mind selling to us to make $$$. They mind the negative publicity and perception from normal customers

                        Comment

                        • Balloon_Aficionado
                          Junior Member
                          • Nov 2019
                          • 9

                          #13
                          Re: Larger sized Geo Donuts?

                          Originally posted by npratt
                          Somewhere I have a copy of the patent drawings for the geo and donut molds (posted on C&B back in the dialup era). The mold is hinged and comes apart so the balloon can be stripped. Look along the part of the balloon opposite of the neck and you can maybe see a little mark where the mold halves came together.
                          Is this what you're looking for?

                          Comment

                          • LoonerPlanet
                            Senior Member
                            • Nov 2018
                            • 157

                            #14
                            Re: Larger sized Geo Donuts?

                            Why not write them back and ask for a 24" donut? You have nothing to loose and it could be an awesome balloon.

                            Comment

                            • BalloonBoyUK
                              Banned
                              • Dec 2018
                              • 499

                              #15
                              Re: Larger sized Geo Donuts?

                              Originally posted by Burg
                              Got a reply back from the director of product development at qualatex:

                              "Thank You for sending in this conversation topic. Even though we do not have any immediate plans for additional Geo sizes, we always keep suggestions and requests on file for future use or research needs. If you have any suggestions on what type of larger sizes or what you would use the larger sizes to create, we would be interested in adding that information to our file. You can always email me with this type of information or future product requests so that we have a better understanding of needs and the ways they could be used to help determine production requirements."

                              What do you guys think?

                              In my own, humble opinon, this is just a stock response, and may even be an automatically-generated one.

                              That said, whilst balloon manufacturers may be aware of the balloon fetish, most of them probably don't really want to be directly associated with it - just as most companies would never want to be connected to anything sex-related these days. That's just par for the course, I'm afraid.

                              Likewise, whilst they all make certain shapes/designs in larger sizes, these are ones that they know will sell well (and therefore they can justify the production and manufacturing costs involved), and/or the bigger balloons are designed (and needed) by balloon decorating companies for weddings, parties and the like. If they felt a 36" Geo Donut was potentially worth their while, then Qualatex or whomever may decide to manufacture it. But I fear that - as with the 24" Qualatex round - the demand will not be sufficient to create such a balloon, and to keep manufacturing it as a stock item. It's the kind of thing a company might make, purely as a one-off trial, to test demand.

                              Just my two cents worth...

                              Comment

                              Working...