Looner world records

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Latvian Looner
    Member
    • Sep 2025
    • 93

    Looner world records

    I decided to look on some fun balloon related records on Guinness World Records website, and I thought, have any of theose records achieved by a looner 🤔 ?
    Better yet, have you tought of doing one yourself ? Because I believe we looners have a huge potential for a world record, for most balloons popped in minute, blown up in a minute, or largest balloon blown up by mouth, there could be a lot of ideas if you think about it, so does anybody want to do this, or know a looner that did this record ?
    The hardest thing would be to not get a b*ner while doing the record 😅
  • cl23
    Senior Member
    • May 2022
    • 381

    #2
    I might have invented the fastest machine in the world to fully automatically inflate and seal balloons (and perhaps the only machine, that can do this at all without clips, ribbons or using heat or glue etc.). It does about 6 balloons with 20 liters air each per minute.
    Maybe the Guiness World Records doesn't include the use of machines like this. I don't know. When I built this machine, I thought about the Guiness World Records.

    It would be much faster with a stronger pump, directly connected to it (it is connected via about 6 meters of tubing currently). In endless mode I can inflate and seal about 400 balloons per hour with it. It would be no problem to inflate and seal > 1000 balloons per hour with more than one of these machines, because I am just putting balloons into the machine and am waiting most of the time.

    The video contains accidents (popping):



    grafik.png

    Comment

    • BalloonerGirl
      Senior Member
      • Sep 2025
      • 165

      #3
      There's Guinness records in b2p a hot water bottle by lungs.

      Comment

      • SAF
        Senior Member
        • Nov 2019
        • 168

        #4
        all 3d print?

        Comment

        • OneTrickPony
          Senior Member
          • Feb 2024
          • 170

          #5
          Funny enough the most recent record for balloons blown in an hour(by 2015) is held by someone who was afraid of balloons
          "It's dangerous to go alone! Take this."
          ​
          * You obtained 1 Balloon *

          Comment

          • cl23
            Senior Member
            • May 2022
            • 381

            #6
            Originally posted by SAF
            all 3d print?
            If you are refering to my machine. Yes, everything that can be 3d printed, is 3d printed (all white colored parts, not motors, electronics, screws etc.)

            Comment

            • onemoreblow
              Master Over Inflator
              • Sep 2013
              • 131

              #7
              I have a weird sense of humor but I love inventing "fake products" like for white elephant gift exchanges.

              For example, a "smart balloon" with its own app, wifi and bluetooth. It would be equipped with a pressure sensor, temperature sensor, status lights, inflate/deflate button, built in camera, etc... It would require an internet connection, account setup with a strong password, multi-factor authentication and age verification. It would tweet status updates or send push notifications, and require a monthly subscription for most of the features, but it would include mail-in recycling of the out-of-service popped balloons, and replacement balloon insurance up to one per month (pay shipping only). The base station would only accept balloons with a proprietary connector. Each balloon would include a single-use globally unique encrypted RFID tag with an "inflation limit" to ensure consistent quality so the pump only works with safe "genuine" balloons, unless you upgrade and get the larger model with "unlimited inflation" brand compatibility and other colors unlocked.

              Basically, I've described balloon enshitification. It wouldn't surprise me if it eventually happens with helium tanks, actually, to prevent "unlicensed sellers" from filling foil balloons without requiring ID, since they can drift into power lines.

              Comment

              • AJK64
                Moderator
                • Jun 2018
                • 1280

                #8
                Originally posted by cl23
                I might have invented the fastest machine in the world to fully automatically inflate and seal balloons (and perhaps the only machine, that can do this at all without clips, ribbons or using heat or glue etc.). It does about 6 balloons with 20 liters air each per minute.
                Maybe the Guiness World Records doesn't include the use of machines like this. I don't know. When I built this machine, I thought about the Guiness World Records.

                It would be much faster with a stronger pump, directly connected to it (it is connected via about 6 meters of tubing currently). In endless mode I can inflate and seal about 400 balloons per hour with it. It would be no problem to inflate and seal > 1000 balloons per hour with more than one of these machines, because I am just putting balloons into the machine and am waiting most of the time.

                The video contains accidents (popping):



                grafik.png
                I love watching you burst them. Especially the wrestle busting...you rarely see that in balloon videos. So hot

                Comment

                • cl23
                  Senior Member
                  • May 2022
                  • 381

                  #9
                  Originally posted by AJK64

                  I love watching you burst them. Especially the wrestle busting...you rarely see that in balloon videos. So hot
                  Thanks a lot! That really motivates me. I'm going to produce some POV content now, after having received my new actioncam and a headstrap.

                  My machine will get sensors to recognize, when balloons are full, so I won't have to use a controller for that. More hands free for popping balloons

                  Comment

                  • Balloonymous
                    Member
                    • Sep 2017
                    • 96

                    #10
                    Originally posted by cl23
                    I might have invented the fastest machine in the world to fully automatically inflate and seal balloons (and perhaps the only machine, that can do this at all without clips, ribbons or using heat or glue etc.). It does about 6 balloons with 20 liters air each per minute.
                    Maybe the Guiness World Records doesn't include the use of machines like this. I don't know. When I built this machine, I thought about the Guiness World Records.

                    It would be much faster with a stronger pump, directly connected to it (it is connected via about 6 meters of tubing currently). In endless mode I can inflate and seal about 400 balloons per hour with it. It would be no problem to inflate and seal > 1000 balloons per hour with more than one of these machines, because I am just putting balloons into the machine and am waiting most of the time.

                    The video contains accidents (popping):



                    grafik.png
                    Jesus that looks so awesome! You're living the dream. Plus, it's all 3D printed too?!? I wonder, if you ever perfect the process and it could be scaled to bigger balloons, if there'd be a way you could share the files. Not that I have a 3D printer nor the home to have this, sadly, but just the mere idea of being in bed, enjoying myself, while the room slowly fills with big, 3-foot balloon... gosh.

                    Obviously, if it's just a personal project and you'd rather keep that to yourself, I totally understand. That probably took months of research and testing to achieve, so just giving that away for nothing in return wouldn't be very fair to ask. The surprising part is definitely how it can tie the balloon down so efficiently, it's impressive. Godspeed! <3

                    Comment

                    • cl23
                      Senior Member
                      • May 2022
                      • 381

                      #11
                      Originally posted by Balloonymous

                      Jesus that looks so awesome! You're living the dream. Plus, it's all 3D printed too?!? I wonder, if you ever perfect the process and it could be scaled to bigger balloons, if there'd be a way you could share the files. Not that I have a 3D printer nor the home to have this, sadly, but just the mere idea of being in bed, enjoying myself, while the room slowly fills with big, 3-foot balloon... gosh.

                      Obviously, if it's just a personal project and you'd rather keep that to yourself, I totally understand. That probably took months of research and testing to achieve, so just giving that away for nothing in return wouldn't be very fair to ask. The surprising part is definitely how it can tie the balloon down so efficiently, it's impressive. Godspeed! <3
                      Oh yes, regarding balloons it's an absolute dream that came true. Yes, all the white plastic parts are 3d printed, the balloon transport chain as well. Yesterday, I designed a small and easy to use adapter, so now it can inflate and seal every size of balloon, 3 foot is no problem or latex gloves, condoms etc. Without adapters, it can seal regular 11 - 19" balloons. All balloons are sealed absolutely airtight, so you can keep them like this for months. The adapter weighs only 1 gram (1 / 30 oz) and seals in the same way (you'll see this in my upcoming videos).

                      I am currently working on sensors for auto-stopping when balloons are fully inflated with neck, even for different sizes.

                      I wouldn't mind sharing the designs, but it requires lots of skills to build this machine (3d printing, mechanics, electronics including soldering, programming, etc.). There is an additional programmable electric pump. Without it, nothing works automatically.

                      Many people asked me, if they could buy this machine. If we were in the 70s or 80s, I could built and sale this machine, but we're not and there is no way to sell something like this legally anymore without spending a 6 figure amount only for lawyers etc. and even with them, I would have to alter all designs heavily. One machine would cost a fortune to not lose lots of money. It's just my hobby and I will keep it like that.

                      Every week you can watch the progress of my machines on YouTube.

                      Comment

                      • Balloonymous
                        Member
                        • Sep 2017
                        • 96

                        #12
                        Originally posted by cl23

                        Oh yes, regarding balloons it's an absolute dream that came true. Yes, all the white plastic parts are 3d printed, the balloon transport chain as well. Yesterday, I designed a small and easy to use adapter, so now it can inflate and seal every size of balloon, 3 foot is no problem or latex gloves, condoms etc. Without adapters, it can seal regular 11 - 19" balloons. All balloons are sealed absolutely airtight, so you can keep them like this for months. The adapter weighs only 1 gram (1 / 30 oz) and seals in the same way (you'll see this in my upcoming videos).

                        I am currently working on sensors for auto-stopping when balloons are fully inflated with neck, even for different sizes.

                        I wouldn't mind sharing the designs, but it requires lots of skills to build this machine (3d printing, mechanics, electronics including soldering, programming, etc.). There is an additional programmable electric pump. Without it, nothing works automatically.

                        Many people asked me, if they could buy this machine. If we were in the 70s or 80s, I could built and sale this machine, but we're not and there is no way to sell something like this legally anymore without spending a 6 figure amount only for lawyers etc. and even with them, I would have to alter all designs heavily. One machine would cost a fortune to not lose lots of money. It's just my hobby and I will keep it like that.

                        Every week you can watch the progress of my machines on YouTube.
                        I see, I see. That's very understandable, logistic would be painful, as well as dealing with support for when stuff doesn't work. At worst, if you don't mind sharing the design, you could send them with a 'you figure it out' kinda deal. If the design is already perfected and for people who already owns a 3D printer, it wouldn't cost them all too much to test it out, and maybe someone else could try to write a guide so that you can keep on enjoying what you really enjoy and someone else can figure out how to 'tutorialize' it, making the both of you legends in the looner community.

                        But that's way too early for all that, since you're still perfecting your project. I'll keep an eye on your Youtube channel since the mere idea of this concept being a possibility is making my heart beat insanely hard in my chest. I don't really have an account for this anonymous account, though, so it'll be a bit hard to comment. Maybe I should just create one since I have a G-Mail for 'Balloonymous' related stuff.

                        I am very curious about one thing, though. What kind of knot is the machine performing? In the video, I sometimes see the balloon rapidly twisting when the inflation is done, and it's driving me somewhat crazy trying to figure it out. I've eventually understood that you can tie a balloon simply by twisting its neck about three or four rotations, but I have no idea how you achieve that in your compact device. Does something pinch the nuzzle shut before twisting? Is it the part where the mouthpiece is held shut against the air hose that spins rapidly to twist-seal the balloon shut before letting go of it?

                        Thank you for the reply, and I'm looking forward to the future revisions!
                        Last edited by Balloonymous; 10-09-2026, 23:35. Reason: Edited some questions since I've figured out more info on how the machine probably works.

                        Comment

                        • cl23
                          Senior Member
                          • May 2022
                          • 381

                          #13
                          Balloonymous
                          I really appreciate your idea to help and bring this machine to everyone, but only people who can build complex machines (not on a beginner level) can reproduce this machine. Being able to 3d print makes no machine, dead parts only, no function. For the build, I used parts, that aren't available anymore, so these had to be replaced. Now, it only works with a connected laptop. When it's finished, this won't be required anymore, but there will be much more electronics, than you can see in the videos now. It's not print, plug and play. It's so much more and it's not perfect and I am not trying to make it perfect anytime soon. I prefer, adding cool new features over reliability. It will be much more reliable in the future and it's much better than the machine, I build last year, but still far from perfect.

                          Here is the latest video of it inflating different sized balloons and latex gloves with the adater, I desinged this week. As you can see, it's a lot of fun:


                          grafik.png

                          The machine does not make a knot, as you already found out. It spins the nozzle of the balloons (and it works much better, than doing it manually with your hands, because it's extemely fast, what makes a better seal). Yes, I designed the machine to be compact, but the twisting mechanics don't require many parts. The machine does not pinch the neck before (but I will indeed add this feature later for more reliability).

                          The air nozzle can be rotated and the part of the balloon chain, where the balloon sits, rotates as well, so the balloon has to rotate too, when the twinsting part is active. The rest of the balloon is prevented from to rotating by some teeth on the surface (this will be replaced by a pinching mechanism later).

                          Comment

                          • Balloonymous
                            Member
                            • Sep 2017
                            • 96

                            #14
                            cl23
                            I see, I see. Thank you for the thorough reply, and I absolutely agree that the machine looks like a lot of fun, I'm extremely envious, but with the amount of effort you've put in it, you absolutely deserve it. And I had assumed that it was not beginner friendly and not just print & plug & play since I see screws, motors, the hose and a compressor. It's also why I had mentioned an idea of releasing the files once you felt your design were perfect, and let the community figure it out, make proper tutorial, the other tools needed, etc. I'm pretty sure that, given a base, a lot of people would band together to prepare a manual on how to set things up, so you yourself can enjoy your invention in peace.

                            Personally, just the idea that this is possible is already hyping me, and learning of this tying technique makes things so much more feasible. If I had more room and a 3D printer myself, I would absolutely go ahead and test some things out, but for now, I will watch your progress and pray that I'll get something similar in my hands one day. Just the idea of setting the machine, booting it up, doing something else and coming back to a room filled with big balloons... I'll keep on dreaming.

                            Looking forward to the future videos, I'll definitely follow you, and I also created a Youtube account to be able to comment and show my support over there as well!

                            Comment

                            • cl23
                              Senior Member
                              • May 2022
                              • 381

                              #15
                              Balloonymous
                              Thank you for commenting my video
                              I love sharing information about my machines. I just don't want someone to be disappointed, who wants to rebuild my inventions, spending money and time without getting it to work (for sure, some people could).
                              This is the electric pump, that supplies all of my machines with air without its front cover:

                              inflator.jpg
                              There is lots more of this in the backside of the machine covered by the big blower motor. This was not really a weekend project, it took several years, until it was as it is now, but I'be been using it at least once a week and loving it for 10 years now. It's, what I control with the wireless PS2 controller, my phone or the laptop in the videos

                              For sure, a much less complex device would be enough to supply air. Instead of measuring the air volume with a complicated sensor (the big black thing in the middle - a part from a car) and more sensors, you can simply measure the time, the pump runs, like all commercial automatic electric balloon pumps do (i love making it better and measuring and stuff).

                              I am planning on switching to a new technology in all of my machines, so they all will get WiFi and some simple method to control it, like controls on a simple web site and simple HTTP commands. This will make it much more easy to create an App that controls a blower via a WiFi power plug with an attached electric pump and the balloon sealing machine you see in my recent videos.

                              I have lots of more important things to do atm, so this might happen in the near future or never. Noone knows

                              Comment

                              Working...