Carnival and arcade balloon pop games

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kahuna09
    Senior Member
    • Jul 2013
    • 126

    #16
    Originally posted by FPilotWolfsDen
    53918323_10216050845281291_2279731978875961344_n.jpg?_nc_cat=102&ccb=1-7&_nc_sid=127cfc&_nc_ohc=J3iUmsKgAA4Q7kNvwGXSfan&_nc_oc=AdoYY347xRlfu-Ozzs4A1wBsJtU36IlHeKHsuPx8FZcrH6aFYPXpp3dP0x6xfI8frTw&_nc_zt=23&_nc_ht=scontent-atl3-2.jpg
    There is a company in this part of the nation that does regular auctions of arcade game sets. This is "Explosive", an update to "Pop It & Win". According to the web documentation from the manufacturer, the balloons used are 42" and they sell refill packs.
    damn i would love to buy one of these. Not sure where I would put it. But would be fun as hell to have. I wonder how much they are.

    Comment

    • TheBigPoolCat
      Senior Member
      • May 2025
      • 163

      #17
      Back when Q24's were a common thing, I had a buddy who would be at a local fair and one of the prizes you could get for winning the darts game was a helium filled one.

      Glad I wasn't at that fair. The money I would have wasted trying to save even one balloon. For the longest time I was a bleeding hearted nonpopper, and those games made me sad when I passed.

      Comment

      • Local-10
        Banned
        • Jan 2026
        • 145

        #18
        Originally posted by TheBigPoolCat
        Back when Q24's were a common thing, I had a buddy who would be at a local fair and one of the prizes you could get for winning the darts game was a helium filled one.

        Glad I wasn't at that fair. The money I would have wasted trying to save even one balloon. For the longest time I was a bleeding hearted nonpopper, and those games made me sad when I passed.
        That's fair. I understand.

        Comment

        • cl23
          Senior Member
          • May 2022
          • 381

          #19
          I've gotten a little bit closer to my new arcade balloon machine or new mass balloon inflator

          This is a prototype, I designed and built, that can seal balloons without any extra material by spinning the balloon mouthpiece against the inflated balloon. It automatically inflates a balloon, seals it and releases it, so it jumps out of the machine. I tested it successfully with various balloons from 11 to 19" by manually moving the motors only without touching the balloon. It works as expected. Later, it will be used with dozens of balloons in a row.

          As soon, as I have connected some electronics, I will show it on my YouTube channel in action:

          6.jpg

          5.jpg

          Comment

          • Local-10
            Banned
            • Jan 2026
            • 145

            #20
            Originally posted by cl23
            I've gotten a little bit closer to my new arcade balloon machine or new mass balloon inflator

            This is a prototype, I designed and built, that can seal balloons without any extra material by spinning the balloon mouthpiece against the inflated balloon. It automatically inflates a balloon, seals it and releases it, so it jumps out of the machine. I tested it successfully with various balloons from 11 to 19" by manually moving the motors only without touching the balloon. It works as expected. Later, it will be used with dozens of balloons in a row.

            As soon, as I have connected some electronics, I will show it on my YouTube channel in action:

            6.jpg

            5.jpg
            AWESOME. What is the red balloon you got there? It looks fun

            Comment

            • cl23
              Senior Member
              • May 2022
              • 381

              #21
              Originally posted by Local-10

              AWESOME. What is the red balloon you got there? It looks fun
              Thank You! The red balloon is from Cattex. They sold these with heavy discount as 16" in red only a few years ago, but I think they are the same as their regular 19". I bought lots of them. They are fun for sure

              Comment

              • Scooter
                風船天才
                • May 2022
                • 497

                #22
                Ugh, I always worry about running into one of these machines in an arcade. Nightmare material right there. But like a good nightmare? It's one of those scenarios I don't wish to be stuck in, but a part of me finds fun to daydream about.

                I don't mind the carnival stuff as much though since its outdoors and its usually more obvious that its there. By the time I'm a block away from the booths, I can't hear the pops. I also keep an eye out just in case an attractive lady is running the booth too.

                Comment

                • Local-10
                  Banned
                  • Jan 2026
                  • 145

                  #23
                  Originally posted by cl23

                  Thank You! The red balloon is from Cattex. They sold these with heavy discount as 16" in red only a few years ago, but I think they are the same as their regular 19". I bought lots of them. They are fun for sure
                  Your welcome. Thanks, the red balloon looks cool so I may get some.

                  I was online last night and found some cheap Qualatex stuff. There a pack of white and another pack of kiwi green 17in for real cheap in a 50 pack and some watermelon red ones for cheap too. Even better, I've found some more Qualatex 17s in blue and about 200 in stock for 3 bucks a balloon. Maybe I should ask for a bulk buy on those and see if I can get it cheaper.

                  Yes, Cattex are cool. Only thing is shipping being expensive. I got some 24s and they are fun all the way from Germany.

                  Comment

                  • Gunnapop
                    Senior Member
                    • Oct 2020
                    • 215

                    #24
                    ...wicked awesome, Cl. What does the 'spun' portion of the (knot) look like? ~gp

                    Comment

                    • cl23
                      Senior Member
                      • May 2022
                      • 381

                      #25
                      Originally posted by Gunnapop
                      ...wicked awesome, Cl. What does the 'spun' portion of the (knot) look like? ~gp
                      It depends on the settings of the machine and how tight the balloons get inflated. The machine can seal balloons with full neck or without neck, but without neck, it looks different and needs more spins and some balloons with very smooth latex need more.

                      Comment

                      Working...