Inflation technique?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lucid
    Senior Member
    • Sep 2016
    • 1174

    Inflation technique?

    I was sorting through the balloon stash the other day and stumbled upon some balloons I'd completely forgotten about. I found some Cattex heart shaped balloons. I have no idea what size they are, but they are friggin huge! I was all excited to try them out, but I also realized that I have no idea of how to go about blowing them up. There's no way it can be as easy as strapping them to the pump and letting er rip. I found 3 orange, 3 blue and 3 pink ones. Blue and pink are my favorite, so I decided to learn the ways using the orange ones to start with.

    On my 1st attempt, i assumed these would be like alot of the shaped balloons where you have to inflate the end 1st, so that's what I did. I pumped about 12 or 14 inches worth of air into it, then sat on it, squeezing all of thr air into one of the lobes of the top of the heart. I put a bit more air in it, then as I was squeezing air into the other lobe, it popped.

    On my 2nd attempt, I assumed this could only mean that you're supposed to inflate the entire upper part simultaneously. Like before, I put some air in it, then squeezed all of it into the top. I cut the pump back on and it also popped about 4 seconds later.

    On the 3rd attempt, I assumed this must mean you gotta inflate the bottom 1st. Nope. It also popped.

    Basically what im saying is i did alot of assuming. Thankfully i didn't make an ass out of anybody else on this occasion, but ive certainly been successful at making an ass of myself lol. I've had enough of trying to learn on my own. This fiasco has cost me 3 pretty cool balloons and about 12 bucks by my guesstimate.

    If anybody here could please help a brotha and teach me the ways of inflating bigger heart shaped balloons? I wouldn't think it should be that difficult, but it has me utterly defeated at this point.

    I swear if i pop these other 6 hearts without successfully inflating them 1st, I may as well hand in my looner card.

    Help...HELP PLEEEASE!!!

    Lol thanks in advance 😊
  • LoonerHoax
    Senior Member
    • May 2020
    • 521

    #2
    I'm kinda in the same boat. I had 2 clear Cattex 55in hearts. Both popped before the lobes filled all the way up. I haven't bought anymore since. The old Q36 hearts I would put on the pump and let them go until they were full.

    Comment

    • DJ Looner
      Senior Member
      • Apr 2020
      • 160

      #3
      Thats unfortunate, though ive never had the cattex hearts I do have a lot of their Climb in balloons. I always put those in the clothes dryer for a few minutes before infating them. Maybe read ch out to Bubblexl amd ask them they sell these. And its where I get my climb in balloons. They have always been very friendly and helpful.

      Comment

      • Nopops4me
        Senior Member
        • Jun 2015
        • 976

        #4
        Heart balloons are tricky to inflate. I'm in no way an authority on inflating hearts. Only putting out what others over time have reported in the past.
        Inflating the heart from the start is like inflating a normal round balloon but the 'drip point' is not directly opposite from the mouth piece. There are two 'drip point's' on the ends of the lobes. This means the dip between the lobes is a weak area and trying to pull apart as you try and inflate the lobes. Of course it can't take it so it bursts. Somehow one has to try and stop this weak spot of latex from expanding whilst the lobes are being blown up.
        Give this a try it may work. I'm not guaranteeing it though. Maybe others will have other ideas..
        Of course, don't try and over inflate a heart, or you'll lose it. Good luck.

        Comment

        • The Masked Looner
          Senior Member
          • Nov 2024
          • 179

          #5
          Maybe letting them warm up on a warm radiator for a while might help make them more pliable.
          Looning since 1989

          To see my pictures of prints and blown up examples: Printed Balloons - Balloon and Inflatable Fetish Forum​

          Comment

          • Guest

            #6
            Not sure how big your balloons are, but I have some experience with 18" cattex hearts. Firstly; they are unpredictable. They are the only balloon I refuse to inflate by mouth. The issue with all heart balloons is that they have a weak point between the 2 lobes which tends to split and then the two parts fly back and will be almost guaranteed to slap you the face!

            A technique I've found to combat this is to give both lobes a really decent stretch, then inflate the balloon slowly until the heart shape starts to form. Tie it loosely (or clip it) then GENTLY (can't emphasise this enough) squeeze the air into each of lobes. You can also squeeze air into the neck at this point and pull on the neck if you want a decent neck. Cattex 18" can get awesome necks. When you've worked the balloon a bit like this, carry on inflating slowly (a hand pump is a good idea). Stop when it starts to feel tight and repeat.

            This is not 100% reliable, but I have had some success with 18" and smaller. I tried some cattex 25" hearts once and both popped while inflating before I could even get the heart to form so I didn't buy any more.

            Comment

            • 154#
              Fly with me (;
              • Mar 2026
              • 229

              #7
              The cattex 55" heart.....🙄 Inflating one properly the equivalent to catching the mythical 🦄 unicorn. Very tricky. 1 have about 12. Six in pink and six in red. My favorite part of a hear balloon is definitely the weak point between the humps. You could almost see the latex tear in between the humps as you blow up the balloon. That being said I do have a strategy that has worked for me.

              Partially inflate the heart and tie it off. Then stuff and squeeze the air into one of the humps. ( one at a time!) Keep working the air into each hump until each one is soft and fatigued. If done properly, upon inflation the air should fill the humps of the heart balloon first before filling the rest of the big 🎈 balloon. It may not work for everyone but this strategy has payed off for me ! !

              Happy 😊 looning!

              Comment

              • lucid
                Senior Member
                • Sep 2016
                • 1174

                #8
                Thanks for the input everybody!
                I had no idea these were such a problem balloon to inflate. At least I don't feel like such a failure knowing that I'm not alone in this issue haha.

                I shall proceed with the advice I've been given here. I've got 6 more tries left. If I manage to get the hang of it with one of these, super awesome.
                If i prematurely pop all 6 balloons, I'll just have to accept the fact that big heart balloons aren't for me. Then I'll bandage up my hopes, my pride and my wallet, and just enjoy my other balloons lol.

                Thanks again!

                Comment

                Working...