First time inflation experience

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • new looner
    Junior Member
    • Jan 2026
    • 5

    First time inflation experience

    So, I am still new to balloons. Especially doing it myself. But not too long ago, I bought 32 inches balloons on Amazon just yo test it out and see if the kink really worked on me.

    when I opened the package to blow one up that night, the first thing I saw was their size when flat. They were just soooo big even uninflated and so was the neck. The smell is weird, not too unpleasant but very weird.

    When it came to blowing it up, I layed down on my bed, tried to fit my mouth in the nozzle however I could then started. It took a couple of breath to round out at all but when it started blowing up. Boy oh boy did I have a boner.

    So I blew a bit but as I am not a popper i was scared to blow it up too much and just pop it so it stayed small, even though it was pretty big. I was so hard I put the balloon between my legs and started squishing it while... you know...

    In the end I deflated it and stashed it but it was so good I'll have to do it again eventually.
    For those with more experience, when do you know a balloon is at full capacity ? I want to bring it closer to 32" but I am too scared for that. And are they really squishable ? Like If I want to sit on it can I?
  • Scooter
    風船天才
    • May 2022
    • 497

    #2
    Originally posted by new looner
    For those with more experience, when do you know a balloon is at full capacity ? I want to bring it closer to 32" but I am too scared for that. And are they really squishable ? Like If I want to sit on it can I?
    Depends on the balloon.

    Some brands are squishier than others and have particular "tells." The major one is known as "necking". As the balloon gets to rated size, it gets firmer and less squishy. If it's of decent quality, the latex will be so firm that the breath needs somewhere new to go and will begin to expand the neck (the nozzle) of the balloon. Once that happens, you know you're starting to go past what it's designed to hold and random pops become more likely. Good quality balloons with the right technique can fill the whole neck, but if you're nervous or not into popping, this is the point the balloon is basically telling you "Okay, I'm good, you can stop now." Tear-drop shaped balloons are the most obvious with this, but larger round ones can as well.

    If the balloon is particularly soft, perhaps from repeated inflation, it may not become much tighter. Instead, it will just keep stretching until it can't stretch more and pop. While accidents happen, they still should reach their "max" size before they go, however. If you go "Huh, it should be getting firmer by this point, but it's not...", it'll probably be like this. Cheaper balloons are the most dangerous because they're less consistent from thinner or lower quality latex.

    Sitting on a balloon can be done, again, as long as the quality is good enough. If you have a good balloon, a soft floor under you, and you underinflate it, the balloon should hold up pretty well. Just be careful how you distribute the weight, and ease yourself onto it. You want the balloon to be on the squishier side for this, not tight.

    Comment

    • Kummelkopp
      Member
      • Feb 2025
      • 91

      #3
      As allready mention, all depends in the quality of the balloons, weight etc.
      I myself am a non popper, so I seldom tried, but I think watching a few videos of large balloons beeing sat on, should give you some confidence.

      The amount of abuse some balloons take without popping is insane.

      Comment

      • new looner
        Junior Member
        • Jan 2026
        • 5

        #4
        Thanks for the replies.

        I do not know if Amazon's 32" inches are good quality but when under inflated, they are squishy indeed.
        indeed. i think I'll buy myself a bigger size of balloons of they exist just so I can see until where I can go.

        I do think that necking is possible on the ones I've got but its going to be near impossible to tie it.

        I thought about getting some helium too since I've got a few ideas with this but I'll see how much they cost a bit later. i wonder, does helium make 32" inches float ? at least a bit ? or should i get a smaller size ?
        Last edited by new looner; 19-02-2026, 17:12.

        Comment

        • SalmonLooner
          Senior Member
          • Nov 2012
          • 200

          #5
          Also a good recommendation if you are a non popper. Use ear plugs. So, if a balloon accidentally pops, the sound won't be too loud. I would also recommend this for poppers for their health by the way.

          Comment

          • 7balloon
            One of the First Online
            • Dec 2018
            • 683

            #6
            32 inch balloon will take a ton of helium. I think the math is 36 times more helium than a 12 inch balloon. if you want the wonderful float, blow up the balloon about 2/3 with air before moving to helium. it should still have plenty of float.

            if you dont have an air pump, they are available for less than 20 bucks online or at Wal-Mart. wear some jeans, a sweatshirt and ear plugs and you can test your balloons for what you like and find your own safe size. armored like that you should be okay with an accidental overinflation.

            Comment

            • new looner
              Junior Member
              • Jan 2026
              • 5

              #7
              Originally posted by 7balloon
              32 inch balloon will take a ton of helium. I think the math is 36 times more helium than a 12 inch balloon. if you want the wonderful float, blow up the balloon about 2/3 with air before moving to helium. it should still have plenty of float.
              yeah, i need a bit of float, so i can tie one or two of them down to me with string. but if the balloon has a lot of upward force it does not bother me at all.

              Comment

              • Not2big
                Member
                • May 2024
                • 60

                #8
                Originally posted by new looner
                I thought about getting some helium too since I've got a few ideas with this but I'll see how much they cost a bit later. i wonder, does helium make 32" inches float ? at least a bit ? or should i get a smaller size ?
                If you get those disposable tanks at Walmart they’ll probably run out before you fill one of those balloons. You can also rent a larger tank from a gas station/ welding place for like $125 if you want yo go to town.

                Comment

                • new looner
                  Junior Member
                  • Jan 2026
                  • 5

                  #9
                  Originally posted by Not2big
                  If you get those disposable tanks at Walmart they’ll probably run out before you fill one of those balloons. You can also rent a larger tank from a gas station/ welding place for like $125 if you want yo go to town.
                  I don't have Walmart and most other American shops as I live in france. But I'll try to find a small bottle of helium. I don't want to go too big first thing plus I have a couple of 12 inches I can try it on.

                  Amazon is still going be where i'll buy it probably. But I saw they just sell too much thread to tie it down. I'll have to find smallest portions of that.

                  Comment

                  • EthylTheAardvark
                    Senior Member
                    • Nov 2016
                    • 169

                    #10
                    You just need to feel the balloon as you're inflating it. It depends on the brand, but in general you can inflate them safely until the sides don't have a whole lot of "give" anymore. You can often inflate them some more if the area around the nozzle still has some give, but every balloon is different and accidents can happen.

                    I usually wear some foam earplugs if I'm worried about an accidental pop, but my online suppliers tend to have pretty high quality and I haven't had that happen in quite a while. I get my balloons from MSR balloons (https://msrballoons.com/) -- I just emailed them and they were happy to set me up with an account. If you have a favorite brand, you can usually find a wholesaler who will be less expensive and higher quality than the ones you can find on Amazon or from party stores. You should be able to find a few EU/France ones near you.

                    A lot of larger balloons can support a person (or sometimes 2 people) sitting on them, but can be unpredictable. Something like a Sempertex 360 might be virtually indestructible unless punctured. Popping content on youtube might be a good way to get an idea of how much abuse specific balloons can take before they break, if you can watch stuff like that. Some people have difficulty with that sort of thing.

                    If you're also curious about large vinyl inflatables, inflatableworld.de looks like they're still selling some items. Their fox (https://www.inflatableworld-wsp.de/c...wn-shiny-p-108) is huge and would probably provide you a similar experience to a large balloon. Sadly, my favorite items from them seem to all be out of stock.

                    Comment

                    Working...