One way valve

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    One way valve

    Has anyone made a one way valve that can do different sizes ?
  • phenix
    Senior Member
    • Jan 2021
    • 349

    #2
    Roomtex did it

    Comment

    • cl23
      Senior Member
      • May 2022
      • 381

      #3
      I made one. It goes from 12 to 19 inch. Simply put a balloon in the hole and start inflation. The balloon can't escape on its own. You can inflate the balloons with your mouth or use the connector for two sizes of hoses:

      2.jpg 4.jpg
      Here you can see it in use:

      Comment

      • Not2big
        Member
        • May 2024
        • 60

        #4
        Have you tried making bigger ones for like TBVQ24 and BB30 or the 36” China balloons?

        Comment

        • cl23
          Senior Member
          • May 2022
          • 381

          #5
          Originally posted by Not2big
          Have you tried making bigger ones for like TBVQ24 and BB30 or the 36” China balloons?
          Many balloons larger than 19 inch don't work properly with the method above, because the rolled latex of the balloon nozzle isn't stiff enough to make an airtight connection, when put into the hole. It might work with some giant balloons with smaller very round nozzles like the discontinued Qualatex 36 inch. I still have to try this.
          Most of the times, i simply put larger balloons not into the hole, but put them over the whole one way valve. I could improve the design for this.

          I designed a very big adapter for latex gloves etc. that i can connect to one of my one way valves, but you have to secure the glove or balloon for pump to pops or it will just fly away:

          1.jpg

          Comment

          Working...