Hi there, I am pretty new to the forum and also into balloon fetish. I am still exploring, and I just bought some new printed balloons that I really liked, but I heard that balloons do not last as long as something like Inflatables/pool toys? If so, can anyone give me any general tips on how to preserve balloons for as long as possible? such as how to clean them after play and also how to properly store them when not in use to maximize their lifespan.
In need of a few tips
Collapse
X
-
Do not tamper with the powder inside. After each use, use boiling hot water to clean the outside without letting the water go inside by clipping the mouth. This will restore the latex to its condition as original as possible and will maximize lifespan. Store in a dry, cool place to avoid molds.
Enjoy! -
Hot water, agreed, but anything above 40°C (104°F) should be hot enough to shrink back the balloon. Splashing around with boiling water is just dangerous!
A hairdryer could also effect the shrink-back. The wet method, especially with a drop of liquid soap, is of course much better for keeping the surface clean and grease-free which is quite important for durability.
Regarding optimal storage, I would add darkness and air-tight encapsulation, e.g. in a ziplock bag or wide-neck plastic bottle, to reduce oxydation.
Despite all efforts, regularly used ballons are short-lived. You are right to not expect the durability of vinyl toys. Even if you don't get very rough with your balloons, you will experience them becoming softer and less shiny in the course of just a few weeks. A characteristic rubber smell will develop – some of us like it, others (including me) don't. Then it can easily happen that your object of desire suddenly pops without warning. When that happens, don't become too sad: remove the shards and inflate a new one!
Enjoy!Comment
-
Thank you so much for the tips! I'll be sure to make the most of the balloons I got!Hot water, agreed, but anything above 40°C (104°F) should be hot enough to shrink back the balloon. Splashing around with boiling water is just dangerous!
A hairdryer could also effect the shrink-back. The wet method, especially with a drop of liquid soap, is of course much better for keeping the surface clean and grease-free which is quite important for durability.
Regarding optimal storage, I would add darkness and air-tight encapsulation, e.g. in a ziplock bag or wide-neck plastic bottle, to reduce oxydation.
Despite all efforts, regularly used ballons are short-lived. You are right to not expect the durability of vinyl toys. Even if you don't get very rough with your balloons, you will experience them becoming softer and less shiny in the course of just a few weeks. A characteristic rubber smell will develop – some of us like it, others (including me) don't. Then it can easily happen that your object of desire suddenly pops without warning. When that happens, don't become too sad: remove the shards and inflate a new one!
Enjoy!
Although I have additional questions, I heard that balloons shouldn't come into contact with water as it could risk a quicker oxidation of the latex, is this true? Or is it still alright if I clean the balloon with warm soapy water after every play and make sure to dry it thoroughly using something like paper towels?
And is using baby powder a good way to keep it dry during storage especially after cleaning it with water? (I used Johnson's baby powder to be exact haha)Comment
-
I'm convinced that water alone can hardly harm the latex. Of course you want to rinse your balloon with clean water after having washed it with a drop of soap.Although I have additional questions, I heard that balloons shouldn't come into contact with water as it could risk a quicker oxidation of the latex, is this true? Or is it still alright if I clean the balloon with warm soapy water after every play and make sure to dry it thoroughly using something like paper towels?
Putting a balloon in a swimming pool is of course quite a different environment: Pool water contains chlorine or ozone for disinfection, and these chemicals are somewhat aggressive, not only to your eyes. In addition, any sun=UV light, direct and reflected by the water surface, is a real latex shredder. Perhaps such effects nourished the rumor that water is bad for balloons.
The balloon industry use talcum powder to prevent the latex from sticking together. Baby powder may also have other ingredients, e.g. perfume, which may not be balloon-safe. As Hellus pointed out, leave the powder on the inside where it is, and keep the outside simply clean and grease-free. Together with dry, cool, dark, and airtight storage this is the best you can do to keep your balloons intact while you are not playing with them.Comment
-
Hey Seb welcome aboard!
Glad to have you and thanks for posting. If everybody here threw something up on the boards, there would be too much to read in a single day. Lets make it happen!
To answer your question: Yeah hot water will definitely do the trick, but a hair dryer or just any type of heat will shrink your balloons back down. Sometimes I don't even bother shrinking them down. I haven't noticed much of a difference to be honest. I just do it more out of habit than anything.
For storage I like to use ammo cans or boxes. You can use the steel milsurp cans but I prefer the commercial grade plastic ones. For both ammo and balloons lol. A company called "Plano" makes a good one. My personal go-to is made by MTM. They're pretty sturdy but still lightweight and have an airtight seal when you close and lock them. You can get different sizes and they stack to help you conserve space in your room.Comment
-
Aahh I see I see, thank you so much for answering my questions and giving me a few tips! I'm excited to explore more with balloons!
I'm convinced that water alone can hardly harm the latex. Of course you want to rinse your balloon with clean water after having washed it with a drop of soap.
Putting a balloon in a swimming pool is of course quite a different environment: Pool water contains chlorine or ozone for disinfection, and these chemicals are somewhat aggressive, not only to your eyes. In addition, any sun=UV light, direct and reflected by the water surface, is a real latex shredder. Perhaps such effects nourished the rumor that water is bad for balloons.
The balloon industry use talcum powder to prevent the latex from sticking together. Baby powder may also have other ingredients, e.g. perfume, which may not be balloon-safe. As Hellus pointed out, leave the powder on the inside where it is, and keep the outside simply clean and grease-free. Together with dry, cool, dark, and airtight storage this is the best you can do to keep your balloons intact while you are not playing with them.Comment
-
Ahh that's an interesting idea actually, although I'm not sure how to get ammo cans in my country as of now but if I do grow my balloon collection I would definitely have to give it a try.Hey Seb welcome aboard!
Glad to have you and thanks for posting. If everybody here threw something up on the boards, there would be too much to read in a single day. Lets make it happen!
To answer your question: Yeah hot water will definitely do the trick, but a hair dryer or just any type of heat will shrink your balloons back down. Sometimes I don't even bother shrinking them down. I haven't noticed much of a difference to be honest. I just do it more out of habit than anything.
For storage I like to use ammo cans or boxes. You can use the steel milsurp cans but I prefer the commercial grade plastic ones. For both ammo and balloons lol. A company called "Plano" makes a good one. My personal go-to is made by MTM. They're pretty sturdy but still lightweight and have an airtight seal when you close and lock them. You can get different sizes and they stack to help you conserve space in your room.
Since my collection is fairly small, I've been using those transparent food grade airtight container to store them haha, I'm not sure how it would compare to the ammo can storage boxes you mentioned though. (>.>)Comment
-
Reading all these amazing suggestions resulted in having a question. After balloon inflation (I only inflate by mouth), I turn the balloon inside-out, and then blow dry it to shrink it down. I do this so that the inside isn't moist of my breath, but is this considered bad?Comment
-
You wash off the talkum.Reading all these amazing suggestions resulted in having a question. After balloon inflation (I only inflate by mouth), I turn the balloon inside-out, and then blow dry it to shrink it down. I do this so that the inside isn't moist of my breath, but is this considered bad?
I guess it's not that bad, but also not optimal, as balloons tend to stick to itself. I avoid this by clipping off used balloons with just a bit of air inside. Not enough to stretch the rubber, Just the amount, so the inner walls won't get in contact to one another.Comment
Comment