Share your looner tricks! πŸ™Œ

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JustMe
    Member
    • Aug 2023
    • 47

    Share your looner tricks! πŸ™Œ

    As the title says, share your favourite looner tricks that could be helpful for others. All kinds of tricks are welcomed related to looning. Let me start with my favourites. 😊

    1. You can turn your wrinkled latex balloons back to almost brand new condition using hairdryer. @ι’¨θˆΉε‹•η”»β”‚Balloon Videos has made a great demonstration video of this on YouTube: https://youtu.be/vDp2zlmWydE

    2. This is bit harder to explain since I don't have demonstration video for this, but you can open balloon knots using two forks (even tight balloon knots).
    -Insert one pin of the first fork to the balloon knot from the bottom.
    -Insert second pin from the other fork similarly from the bottom so the back of the forks are against each other.
    -Press the handles of the forks together and the balloon knot stretches open.
    -Take the mouth part of the balloon neck through the hole you just created with the forks.
    -And yayyy! We have unknotted balloon! πŸ₯³

    3. More simpler one, but I use this the most. πŸ€— You can make half-knot by leaving the mouth piece of he neck halfway on the knot instead of pulling the whole thing through. Makes it super easy to untie whenever you want! :3
  • DJ Looner
    Senior Member
    • Apr 2020
    • 160

    #2
    You can also just put your used balloons in the clothes dryer for a couple minutes and boom they snap right back. Learned this from using climb in balloons those I go 10 min because they are so thick.

    Comment

    • AlterPlatzer
      Senior Member
      • Jun 2024
      • 1528

      #3
      With helium balloons, if you tie the balloon to the ribbon instead of tying the ribbon to the balloon, if you hold the balloon and pull on the ribbon, the knot will untie itself.

      It's OK to love balloons.
      There are as many differences in preferences as there colors of balloons. Accentuate what makes us the same and not what sets us apart.

      Comment

      • stretchedtight
        Senior Member
        • Apr 2013
        • 275

        #4
        Originally posted by onemoreblow
        You can tie overinflated balloons with a broken balloon mouth piece (it's the perfect size) instead of buying clips.
        I need a photo to better understand. Love the idea.

        Comment

        • AJK64
          Moderator
          • Jun 2018
          • 1280

          #5
          Pre inflating and stretching necks and repeat inflation in general to get bigger balloons.

          Comment

          • loonlun
            Senior Member
            • Mar 2021
            • 410

            #6
            You can also use lego antennae pieces to untie balloons, as they are more blunt than a fork you're less likely to poke your balloon and burst it accidentally if your finger slips.

            Mosquito netting can make a small balloon room so you don't need to inflate as many balloons to fill an entire room to be surrounded by balloons.

            Don't ride on the bare floor, always put down at least one blanket to catch any tiny sharp particles like clipped fingernails or exposed wood splinters that you may have missed when cleaning/vacuuming. A few blankets can also help pad your knees if the balloon unexpectedly bursts underneath you.

            Comment

            • AlterPlatzer
              Senior Member
              • Jun 2024
              • 1528

              #7
              A plastic garden rake is the best tool for sweeping up balloon shards on a carpeted floor.

              30-poly-leaf-rake-525865_768x560.png
              It's OK to love balloons.
              There are as many differences in preferences as there colors of balloons. Accentuate what makes us the same and not what sets us apart.

              Comment

              • UKPOPPER
                Senior Member
                • Feb 2023
                • 492

                #8
                If you're scared of popping then you can muffle the sound by bursting underneath a duvet or heavy blanket.
                Just one more puff...🎈

                Comment

                • LoonPopper
                  Senior Member
                  • Aug 2011
                  • 772

                  #9
                  To do a blow to pop I usually inflate the neck first a few times then when I'm ready for the finale, I do the neck and let the main part expand to get the best bang.

                  Also, I pinch the bottom of the lip with my teeth, while I hold the top with my upper lip, so I guess Im blowing through my teeth.

                  Always wear some type of protection for eyes and ears, i mostly do my eyes, been hit a few times, hurts like shit.

                  When tying I do a half knot, that way it can be undone if needed or if you want to inflate some and let them sit out to stretch, untie, inflate again, tie, rinse and repeat until it just finally gives in...so "Balloon Torture" at it best LOL
                  Blow, Baby, Blow...when will it pop nobody knows!

                  Comment

                  • LoneLoonRider
                    Senior Member
                    • Jan 2017
                    • 177

                    #10
                    Originally posted by DJ Looner
                    You can also just put your used balloons in the clothes dryer for a couple minutes and boom they snap right back. Learned this from using climb in balloons those I go 10 min because they are so thick.
                    What heat do you use?

                    Comment

                    • OverUsed
                      Member
                      • Apr 2014
                      • 35

                      #11
                      Originally posted by LoneLoonRider

                      What heat do you use?
                      Low heat

                      Comment

                      • Gunnapop
                        Senior Member
                        • Oct 2020
                        • 215

                        #12
                        ...B2P inside another (larger) preinflated balloon...often makes the report softer...for those worried about neighbors. ~gp

                        Comment

                        • UKPOPPER
                          Senior Member
                          • Feb 2023
                          • 492

                          #13
                          Originally posted by Gunnapop
                          ...B2P inside another (larger) preinflated balloon...often makes the report softer...for those worried about neighbors. ~gp
                          That's an interesting idea - also saves on tidying up the shreds. I think I will try this.
                          Just one more puff...🎈

                          Comment

                          • phenix
                            Senior Member
                            • Jan 2021
                            • 349

                            #14
                            Originally posted by UKPOPPER

                            That's an interesting idea - also saves on tidying up the shreds. I think I will try this.
                            But if both loons explode, you get double the pleasure πŸ˜…

                            Comment

                            • TheMole
                              Senior Member
                              • Nov 2019
                              • 302

                              #15
                              Plugging a balloon rather than tying or clipping it puts less stress on the rubber and allows you to get the neck way bigger and play much harder without bursting or having the knot start leaking.

                              I personally use a cork (champagne shape works the best) with a rubber band wrapped around.

                              Comment

                              Working...