Balloon size increases on repeat inflation

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Unknown_Country
    Member
    • Jan 2022
    • 33

    Balloon size increases on repeat inflation

    If you’ve been using balloons multiple times you know that they get bigger the more you inflate them. I think it’s got something to do with different elastic properties between inflation and deflation. Sometimes the differences can get pretty dramatic (attached is a 14 inch inflated once over a fresh 14 inch from the same brand).

    Has anyone experimented with this? Is there a limit of sorts to how much bigger you can get one over the “rated” size? Which brands tend to do the best (or worst!) at this? Does it have anything to do with stiffness or durability or anything like that?
    You do not have permission to view this gallery.
    This gallery has 1 photos.
  • lukmanrewa
    Senior Member
    • Jun 2012
    • 492

    #2
    Yes it does get bigger, but mind you if the balloons have been inflated for a few days/weeks and you completely deflate them and reinflate them afterwards, it will most definitely pop.

    Comment

    • fuzzychubbywolf
      Junior Member
      • Jul 2025
      • 28

      #3
      I think I've seen stretched balloons be restored to normal size with a hair dryer on low heat. Ive got a couple tuftex 36 that are really stretched. Theyll go boom while riding soon or after I finish building my fursuit.

      Comment

      • TheBigPoolCat
        Senior Member
        • May 2025
        • 163

        #4
        "I think it’s got something to do with different elastic properties between inflation and deflation." Inflation and deflation have nothing to do with the elastic properties of the balloons. That's in the latex. Depending on brand, batch, age, latex formula, colour (As that changes the formula), number of inflations, balloons can have a wide variety of stretch and reuse on multiple inflations. It is extremely variable and I doubt the use in investigating it over the long term.

        Comment

        • Klaus
          Junior Member
          • Dec 2025
          • 9

          #5
          When a balloon is repeatedly inflated, the increase in its maximum expansion can be attributed to structural changes within the material. The material in question is typically latex, an elastomeric polymer whose molecular chains are initially arranged in a statistically coiled and disordered configuration.

          During the first inflation process, these polymer chains are subjected to mechanical stress, causing them to uncoil and increasingly align in the direction of the applied strain. In doing so, intermolecular interactions and physical crosslinks must be overcome, which is reflected macroscopically in a relatively high resistance to deformation. After the release of stress, when the air escapes, the system undergoes partial relaxation; however, it does not fully return to its original, highly coiled state. A portion of the chains remains in a pre-stretched or newly arranged conformation.

          Upon subsequent mechanical loading, the material exhibits altered deformation behavior: the partially oriented polymer chains can be further aligned and stretched with reduced energy input. At the same time, repeated deformation cycles lead to microscopic structural changes, such as a reduction in effective crosslink density or the formation of defects within the polymer network. These effects result in an increased macroscopic extensibility and a shift in the maximum achievable expansion.

          Comment

          • Guest

            #6
            I've found that repeated inflations make the main body of the balloon bigger, by up to 15-20%, however, it will swell up more in the main part. The neck is less likely to fully fill with air, and if you push your luck, it often will pop.

            Comment

            • Guest

              #7
              I decided to experiment with various sizes and qualities of a balloons. I used a few cheap multi pack tesco balloons which are 7 - 8" depending on the colour (I compared the same colours to each other because this can make a huge difference), premium tesco balloons (10") and kalisan 12" space nebula prints. For each pair, I overinflated one of them from scratch (without even stretching it). The 2nd one I blew up and deflated six times. What this seems to show is that the bigger and better the balloon, the larger the difference after multiple inflations.

              The small blue one was 7.25" out of the bag, and I managed to get it up to 8" after multiple inflations. 2 popped on me during the process.

              The slightly larger orange was 8.25" and I got it to 9.5"

              The purple (high end tesco) was 10.5" and I got it up to 12"

              The blue kalisan was exactly 12.75" getting up to 15.75"!

              I've included pics of what they looked like uninflated compared to a fresh one.

              A fun experiment. Now I get to have even more fun bursting some overinflated loons!💥😜
              Attached Files

              Comment

              • Guest

                #8
                I've compared a couple of long airship type balloons. 5"× 22" on 1st inflation. 6.5" x 29" after several.
                Attached Files

                Comment

                • srob2
                  Senior Member
                  • Dec 2017
                  • 552

                  #9
                  This is a lot of fun for me. Balloons blown up multiple times or left inflated:
                  1) Can get much bigger
                  2) Are easier to pop
                  3) Are less predictable

                  I love leftover balloons days after a party if I can untie them. Some get really huge, you never know when they will pop, and they aren't as loud or likely to hurt your face

                  Comment

                  • craig farnham
                    Member
                    • Aug 2017
                    • 38

                    #10
                    Balloons do get much bigger with repeated inflations. I have gotten 24 inch balloons inflated to 32 inches with repeated inflations. So yes it does work.

                    Comment

                    • loonlun
                      Senior Member
                      • Mar 2021
                      • 410

                      #11
                      It's been said, but I have to repeat it yes, balloons can get bigger with repeat inflations but they are much more likely to burst, especially if you try riding them.

                      Comment

                      • stretchedtight
                        Senior Member
                        • Apr 2013
                        • 275

                        #12
                        Originally posted by Klaus
                        When a balloon is repeatedly inflated, the increase in its maximum expansion can be attributed to structural changes within the material. The material in question is typically latex, an elastomeric polymer whose molecular chains are initially arranged in a statistically coiled and disordered configuration.

                        During the first inflation process, these polymer chains are subjected to mechanical stress, causing them to uncoil and increasingly align in the direction of the applied strain. In doing so, intermolecular interactions and physical crosslinks must be overcome, which is reflected macroscopically in a relatively high resistance to deformation. After the release of stress, when the air escapes, the system undergoes partial relaxation; however, it does not fully return to its original, highly coiled state. A portion of the chains remains in a pre-stretched or newly arranged conformation.

                        Upon subsequent mechanical loading, the material exhibits altered deformation behavior: the partially oriented polymer chains can be further aligned and stretched with reduced energy input. At the same time, repeated deformation cycles lead to microscopic structural changes, such as a reduction in effective crosslink density or the formation of defects within the polymer network. These effects result in an increased macroscopic extensibility and a shift in the maximum achievable expansion.
                        Would be cool to see before and after views of the material under an electron microscope.

                        Comment

                        • Klaus
                          Junior Member
                          • Dec 2025
                          • 9

                          #13
                          I mean you can predict really good how the structure would look like

                          Comment

                          • Guest

                            #14
                            Yes repeat inflations do make them get bigger and if your trying for the repeat inflation thing a warm hairdryer once deflated dewrinkles them ,did this with a couple of 32 long neck and the size dfeerance was huge especially when they popped way beyond theyre rated size.dont stop till it pop

                            Comment

                            • b0f0s0f
                              Senior Member
                              • Nov 2016
                              • 329

                              #15
                              The amount they can go past depends on how the company designs them. It seems like these days (maybe because they're going for helium retention or sturdiness in general) they are more rigid and hit their elastic limit right around rated size, almost more like a beach ball or something. In the past I feel like they were somewhat more elastic so that there was more margin on going past "full" and them just continuing to grow

                              Comment

                              Working...