Blowing up a big balloon over several days

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Platonic_Lnr
    Senior Member
    • Mar 2025
    • 308

    Blowing up a big balloon over several days

    Have you ever blown up a balloon (particularly one 24”+) to its rated size, and over the next several days or more put a little more air in it each day? If so, how much bigger were you able go get it, and how long did it last? Since balloons obviously stretch out over time, I imagine one could get a balloon blown up pretty big this way.
  • Nopops4me
    Senior Member
    • Jun 2015
    • 976

    #2
    I've never tried this, but surely to keep topping up the balloon each day the neck is not fully knotted. Therefore I think a little air will escape during the 24 hours. So unless you put in more air each day than you have lost, you're never going to gain on yourself.

    Comment

    • cl23
      Senior Member
      • May 2022
      • 381

      #3
      I am also be curious about that. Indeed, you need an airtight seal and this does not have to be a knot. There are several other ways.

      Comment

      • Platonic_Lnr
        Senior Member
        • Mar 2025
        • 308

        #4
        Originally posted by Nopops4me
        I've never tried this, but surely to keep topping up the balloon each day the neck is not fully knotted. Therefore I think a little air will escape during the 24 hours. So unless you put in more air each day than you have lost, you're never going to gain on yourself.
        I’m currently doing this with a crystal yellow Cattex 24” (which I’m pretty sure is a rebranded Belbal 24”). I blew it up to 24” at first, then the next day I blew it to 27”, and today I got it to 29”. However, it’s pretty tight now and starting to form a neck (which Belbals typically don’t do well), and given the room it’s in has big temperature swings, I wouldn’t be surprised if it pops spontaneously soon. And even if it doesn’t, I’m probably not going to blow it up anymore since it’s the only crystal yellow 24” I have, so I want to keep it.


        Last edited by Platonic_Lnr; 09-08-2025, 22:03.

        Comment

        • bigloonfucker.cz
          Punk member
          • Nov 2023
          • 145

          #5
          Cattex dolls now became my favorite balloons. Prestretching is key to prevent unwanted pops. I never inflate dolls to rock hard size. First I inflate it when still soft. Leave it for a minute and deflate. Using hair dryer I return baloon its default shape and heat doll throughly with turning balloon for a couple minutes. Then again inflate doll keeping it soft and repeating this stretching process about 5 times. This lasts maybe half hour, but the doll is then quite stretched and ready for any fun you can imagine. The more I am patient, the more durable the balloon is...
          The softer balloon the better. When not soft enough, I bake him untill success

          Comment

          • Kummelkopp
            Member
            • Feb 2025
            • 91

            #6
            Originally posted by Platonic_Lnr

            I’m currently doing this with a crystal yellow Cattex 24” (which I’m pretty sure is a rebranded Belbal 24”). I blew it up to 24” at first, then the next day I blew it to 27”, and today I got it to 29” (see picture). However, it’s pretty tight now and starting to form a neck (which Belbals typically don’t do well), and given the room it’s in has big temperature swings, I wouldn’t be surprised if it pops spontaneously soon. And even if it doesn’t, I’m probably not going to blow it up anymore since it’s the only crystal yellow 24” I have, so I want to keep it.



            Also, I tied it with a “half knot” so it can be untied, and it actually lost very little air between days. But this method doesn’t always work, however I’ve found it’s better than using clips.



            Whats the issue with clips? I had balloons blown up quite tight for weeks using clips, without losing any air. Also half knots take away material of the neck. I never truly tested out belbal 24", but there is still quite a bit of neck to get, comparing this to pictures from, e.g. Nastila Balloons.

            I guess you did not pre stretch?

            Still nice balloons, will be interssting to See how big it gets 😎🤞

            Comment

            • bloonprincess
              Balloon Cuddler
              • Oct 2023
              • 122

              #7
              I'm doing exactly this right now with one of my remaining Party City 24"s. It's definitely at least a couple inches bigger. It can definitely get bigger but I don't want to leave it at near-popping while I'm out and about haha. Really cute though 💙

              Comment

              • Platonic_Lnr
                Senior Member
                • Mar 2025
                • 308

                #8
                Originally posted by Kummelkopp

                Whats the issue with clips? I had balloons blown up quite tight for weeks using clips, without losing any air. Also half knots take away material of the neck. I never truly tested out belbal 24", but there is still quite a bit of neck to get, comparing this to pictures from, e.g. Nastila Balloons.

                I guess you did not pre stretch?

                Still nice balloons, will be interssting to See how big it gets 😎🤞
                The past couple balloons I’ve used clips with deflated greatly within a day, so I only use them if I plan on popping a balloon shortly after blowing it up. I use half knots for balloons I want to keep for a long time but still might want to blow up more.

                But anyway lol just as I predicted, that yellow Cattex 24” popped within just a few hours. Like I said it was really tight, and that room was kind of hot, so it’s not necessarily the best room to store balloons in.

                I can’t remember if I pre-inflated the neck that much, but Cattex (and Belbal) 24”s just get more tear drop shaped the bigger they get, and when they do spring a neck, it’s small and thin.
                Last edited by Platonic_Lnr; 22-03-2026, 09:02.

                Comment

                • BalloondudeEU98
                  Member
                  • Jul 2024
                  • 78

                  #9
                  Originally posted by bigloonfucker.cz
                  Cattex dolls now became my favorite balloons. Prestretching is key to prevent unwanted pops. I never inflate dolls to rock hard size. First I inflate it when still soft. Leave it for a minute and deflate. Using hair dryer I return baloon its default shape and heat doll throughly with turning balloon for a couple minutes. Then again inflate doll keeping it soft and repeating this stretching process about 5 times. This lasts maybe half hour, but the doll is then quite stretched and ready for any fun you can imagine. The more I am patient, the more durable the balloon is...
                  How big were you able to get them?

                  Comment

                  • bigloonfucker.cz
                    Punk member
                    • Nov 2023
                    • 145

                    #10
                    I can inflate cattex doll (170cm rated) up 220cm. But not humping in this size. As I said, prestretching is key and even high quality balloon can pop at first fast inflating. So I try to not stress new balloon and slowly increase the load of doll. So usually ride 200cm dolls, being quite rough
                    The softer balloon the better. When not soft enough, I bake him untill success

                    Comment

                    Working...