Way too many 36” balloons popping

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Platonic_Lnr
    Senior Member
    • Mar 2025
    • 308

    Way too many 36” balloons popping


    Since getting over my fear of balloons popping, I’ve blown up 12 36” balloons; 3 of which popped before they reached their rated size as I was I was blowing them up (all Tuftex), 2 popped while trying to tie them after reaching their rated size (a Tuftex and Kalisan), 1 Tuftex blown to its rated size popped spontaneously a day after blowing it up, and 2 Tuftex’s popped like a month after being blown up (one of which wasn’t even blown to its rated size).

    Of the remaining 4, I popped 3 intentionally right after blowing them up (1 Tuftex and 2 Decomex; only one of which was blown to its rated size), and only 1 (a Belbal Soap Red) is currently blown up.

    So my question is, what’s going on? Obviously these are all from high-quality brands, yet these are the >only< sizes I’ve had from them that had this high of a failure rate (especially from Tuftex, as 5 of the 8 I blew up popped within a day). I’m not overinflating or being rough with them, so I don’t see any logical reason for why they’d pop so fast. The only thing I could think of is I pre-inflated the neck on a few, but I wouldn’t think that’d cause them to spontaneously pop so easily.

    Do you just think I’m having extremely bad luck, or is it possible the latest batches of 36”s have been bad?

    I’ll say this has actually made my fear of balloons popping come back at bit, as the one thing that still scared me was the anticipation of a spontaneous pop, but before getting into 36”s, it was so rare that it didn’t bother me. But after having half of the 36” balloons I’ve blown up pop in my face, that fear is much more intense, which has now spread into blowing up other sizes of balloons. Not to mention 36” balloons do take awhile to blow up, so when one pops I feel like all that effort was wasted, so having so many pop is discouraging. But the thing is, I WANT to be able to blow them up with no fear because it feels like such an accomplishment blowing up such a big balloon, and I love the way they look. I just don’t know how to get over my fear of them popping.

    So what should I do?
  • AlterPlatzer
    Senior Member
    • Jun 2024
    • 1528

    #2
    Originally posted by Platonic_Lnr
    Since getting over my fear of balloons popping, I’ve blown up 12 36” balloons; 3 of which popped before they reached their rated size as I was I was blowing them up (all Tuftex),

    (especially from Tuftex, as 5 of the 8 I blew up popped within a day).
    Tuf-Tex balloons have a rather short shelf-life and turn into crap rather quickly. You probably got old stock.

    I've mostly switched to Decomex and their 36" balloons tend to be much more reliable than Tuf-Tex and are much cheaper.

    The problem with Decomex 36" is that if you try to get the neck to inflate, even slightly, they are a ticking time bomb.
    It's OK to love balloons.
    There are as many differences in preferences as there colors of balloons. Accentuate what makes us the same and not what sets us apart.

    Comment

    • Nopops4me
      Senior Member
      • Jun 2015
      • 976

      #3
      I feel for you Platonic_Lnr. having so many balloons burst on you. The cost of all those balloons and the wait time for delivery, it's disappointing that they were faulty. You had different makes, Tuftex, Kalisan, Decomex, all good makes usually. I wonder what they all have in common for so many to burst. You haven't been cooking with olive oil and got some on your hands or eating an orange, have you? Latex balloons don't like those substances.
      Yeah, I bet it was disappointing that after the time taken to blow them up to rated they just burst inches from full size. Maybe get an electric pump and blow them up to near rated then top up with your mouth if you like mouth inflating. If they are going to burst early, you're not out of breath for the next balloon.
      Congratulations on overcoming your fear. Try not to let this episode put you back - keep positive, strong and enjoy yourself.
      Best of luck mate.

      Comment

      • Equui-Nox
        Senior Member
        • Nov 2017
        • 186

        #4
        What AlterPlatzer said about TufTex, but also, are you just straight blowing them up, or blowing them up, stretching/squishing them, and then blowing them up some more?

        If you’re using a pump and just going at it full blast until its rated size, most balloons don’t like that and will spontaneously pop on you. Consider blowing it up halfway, bouncing and stretching on it some, and then going the rest of the way, or letting it sit for a few minutes at the halfway mark. The best method I hear most recommend is to inflate, deflate, and then reinflate them, but even just bouncing/riding it a bit and a less-inflated size works.

        Think of it like this, if you told me to get up at 8am and start running a marathon, I’d probably spontaneously explode too. Too much, too quickly. You gotta “warm up” a bit first.

        Comment

        • Platonic_Lnr
          Senior Member
          • Mar 2025
          • 308

          #5
          Originally posted by AlterPlatzer

          Tuf-Tex balloons have a rather short shelf-life and turn into crap rather quickly. You probably got old stock.

          I've mostly switched to Decomex and their 36" balloons tend to be much more reliable than Tuf-Tex and are much cheaper.

          The problem with Decomex 36" is that if you try to get the neck to inflate, even slightly, they are a ticking time bomb.

          Yeah I always hear that about Tuftex’s shelf life. In fact, the 4 that all popped while blowing them up were crystal reds and crystal burgundies, and since Tuftex doesn’t make crystals often, I wouldn’t be surprised if they were old stock. And what sucks is I have 2 crystal magentas that’d I’d love to blow up, but lol now I’m scared to.

          I’ve blown up 2 out of 5 Decomex 36”s I got, one of which was the first 36” balloon I got to full size (which I then proceeded to pop with a laser). However, I blew up an orange one to about 30”, waited a day, and then tried to blow it up all the way, but it got extremely tight well before it reached 36”, so I was scared to push it any further, so I popped with the laser. In fact, speaking of Decomex, the same goes for Decomex’s 26”s, which get extremely tight around 22”, even after one inflation. I just don’t see how Decomex balloons last given how tight they get.

          Comment

          • Platonic_Lnr
            Senior Member
            • Mar 2025
            • 308

            #6
            Originally posted by Nopops4me
            I feel for you Platonic_Lnr. having so many balloons burst on you. The cost of all those balloons and the wait time for delivery, it's disappointing that they were faulty. You had different makes, Tuftex, Kalisan, Decomex, all good makes usually. I wonder what they all have in common for so many to burst. You haven't been cooking with olive oil and got some on your hands or eating an orange, have you? Latex balloons don't like those substances.
            Yeah, I bet it was disappointing that after the time taken to blow them up to rated they just burst inches from full size. Maybe get an electric pump and blow them up to near rated then top up with your mouth if you like mouth inflating. If they are going to burst early, you're not out of breath for the next balloon.
            Congratulations on overcoming your fear. Try not to let this episode put you back - keep positive, strong and enjoy yourself.
            Best of luck mate.

            The only explanation I can think of for why all of them popped was because I pre-inflated the neck. This was particularly the case with the Kalisan 36”, as its neck protruded fairly well once it got to full size, and it popped as I was trying to tie it, and I noticed the “tear” was right at the portion of the neck that wasn’t inflated. Still, one would think a good quality brand of balloon wouldn’t pop that easily.


            While I’ll say I’m not near as scared as I used to be of balloons, after having several 36” balloons spontaneously pop, along with 2 Tuftex 24”s popping right as I was pulling out the neck, (plus another “issue” I don’t want to elaborate on), my fear of blowing up balloons to their max has come back, and I really wish I could get over it again, as I got a great sense of satisfaction getting a balloon to its full size, and then pulling out the neck, which I’d like to feel again. But now, after having several balloons pop once reaching that point, it causes PTSD. While I could repeat the process I used to get over my fear initially, unfortunately the balloons I used, the Walmart 17”s, which have more of a “thump” than a “bang” when they pop, have been completely discontinued, so lol I want to keep my remaining stock. Plus, a lot of the balloons I have are crystals, which of course are becoming harder to find, so lol I don’t even really want to blow them up in the first place, and if I do, I want to keep them as long as possible, but I just don’t have room for them. So I’m just stuck in a rut.

            Comment

            • Platonic_Lnr
              Senior Member
              • Mar 2025
              • 308

              #7
              Originally posted by Equui-Nox
              What AlterPlatzer said about TufTex, but also, are you just straight blowing them up, or blowing them up, stretching/squishing them, and then blowing them up some more?

              If you’re using a pump and just going at it full blast until its rated size, most balloons don’t like that and will spontaneously pop on you. Consider blowing it up halfway, bouncing and stretching on it some, and then going the rest of the way, or letting it sit for a few minutes at the halfway mark. The best method I hear most recommend is to inflate, deflate, and then reinflate them, but even just bouncing/riding it a bit and a less-inflated size works.

              Think of it like this, if you told me to get up at 8am and start running a marathon, I’d probably spontaneously explode too. Too much, too quickly. You gotta “warm up” a bit first.
              I will admit I blew up all the crystal Tuftex 36”s that popped spontaneously as fast as I could via mouth (lol I consider a pump cheating). However, it takes me about 7 minutes to blow up a 36” balloon to full size, so it’s not like a pump that’d be a lot faster, but also 3 out of out of the 4 popped well before they reached 36”, so I can only assume there was a defect.

              But then I did wait a day to finish blowing up the Kalisan 36”, which I had blown to about 36”. However, it still popped as I was tying it once I got it to 36”.

              Comment

              • Equui-Nox
                Senior Member
                • Nov 2017
                • 186

                #8
                Originally posted by Platonic_Lnr

                I will admit I blew up all the crystal Tuftex 36”s that popped spontaneously as fast as I could via mouth (lol I consider a pump cheating). However, it takes me about 7 minutes to blow up a 36” balloon to full size, so it’s not like a pump that’d be a lot faster, but also 3 out of out of the 4 popped well before they reached 36”, so I can only assume there was a defect.

                But then I did wait a day to finish blowing up the Kalisan 36”, which I had blown to about 36”. However, it still popped as I was tying it once I got it to 36”.
                How are you judging its size, by the way? Are you just eyeballing it, or how are you measuring it? The best method I know of to get an accurate sizing is using a chair and the wall or some other object. Take a tape measure and measure between the top of the back of the chair and an object or wall such that the chair is 36” away. If the balloon can pass through with a large gap its too small, if it can’t fit through, too big, and if it passes through with little to no gap, its right at the size it should be.

                Also, even with blowing by mouth, I would give them some time to stretch and bounce on them a bit just to get them to stretch out a bit. You gotta work them just like most other balloons to get them to their rated size.

                Also-also, most 36” balloons aren’t supposed to neck, haha. Unless they are a long-neck version made specifically for that, they are only meant to be round.

                Comment

                • Platonic_Lnr
                  Senior Member
                  • Mar 2025
                  • 308

                  #9
                  Originally posted by Equui-Nox

                  How are you judging its size, by the way? Are you just eyeballing it, or how are you measuring it? The best method I know of to get an accurate sizing is using a chair and the wall or some other object. Take a tape measure and measure between the top of the back of the chair and an object or wall such that the chair is 36” away. If the balloon can pass through with a large gap its too small, if it can’t fit through, too big, and if it passes through with little to no gap, its right at the size it should be.

                  Also, even with blowing by mouth, I would give them some time to stretch and bounce on them a bit just to get them to stretch out a bit. You gotta work them just like most other balloons to get them to their rated size.

                  Also-also, most 36” balloons aren’t supposed to neck, haha. Unless they are a long-neck version made specifically for that, they are only meant to be round.
                  I have a piece of cardboard that’s exactly 3 ft. tall, which has a “flap” on the top that I can lift up and put a balloon under, which is how I measure 36” balloons, so I’m getting them exactly to 36”.

                  I do stretch the heck out of balloons before I blow them up, but would you say that’s not enough for 36”s, and I should instead blow them up halfway and then wait to blow them up the rest of the way?

                  I know pretty much all 36” balloons don’t have good necks, but these are two Tuftex 36”s I got to exactly 36”, and as you can see, they got decent necks for 36”s even at the full rated size. I also know I blew up the white one to like 30”, took a break, and finished it later. However, the red one spontaneously popped about an hour after getting it to full size, and the white one spontaneously popped a month later.


                  Also, as I previously stated, the Kalisan 36” I blew up (I don’t have pictures of it) had its neck pop out before it reached 36”, and it appears that’s where the pop started. But then, I did pre-inflate its neck, so that’s probably what did it. In fact, I know I pre-inflated the necks on a lot of the 36”s that popped, so lol that’s probably what’s making them pop. Still, I don’t see how that could cause so many of them to spontaneously pop well before reaching their full size.

                  Comment

                  • LoonerHoax
                    Senior Member
                    • May 2020
                    • 521

                    #10
                    I don't pre-stretch balloons before I inflate them. Personal thought is that it could stretch the latex funky and cause issues. The other night I inflated previously inflated TT36 and Sempertex 36. Both were close to 44" with necks. I popped them both because they were on their 4th or 5th inflation and the TT had a ton thin spots that looked like large pinholes. I followed those up with a Belbal 36 that got close to 48" with a neck. I was able to sit on all 3 and they weren't hard.

                    Comment

                    • Equui-Nox
                      Senior Member
                      • Nov 2017
                      • 186

                      #11
                      Originally posted by Platonic_Lnr

                      I have a piece of cardboard that’s exactly 3 ft. tall, which has a “flap” on the top that I can lift up and put a balloon under, which is how I measure 36” balloons, so I’m getting them exactly to 36”.

                      I do stretch the heck out of balloons before I blow them up, but would you say that’s not enough for 36”s, and I should instead blow them up halfway and then wait to blow them up the rest of the way?

                      I know pretty much all 36” balloons don’t have good necks, but these are two Tuftex 36”s I got to exactly 36”, and as you can see, they got decent necks for 36”s even at the full rated size. I also know I blew up the white one to like 30”, took a break, and finished it later. However, the red one spontaneously popped about an hour after getting it to full size, and the white one spontaneously popped a month later.


                      Also, as I previously stated, the Kalisan 36” I blew up (I don’t have pictures of it) had its neck pop out before it reached 36”, and it appears that’s where the pop started. But then, I did pre-inflate its neck, so that’s probably what did it. In fact, I know I pre-inflated the necks on a lot of the 36”s that popped, so lol that’s probably what’s making them pop. Still, I don’t see how that could cause so many of them to spontaneously pop well before reaching their full size.
                      I would pause halfway at the least, or at various points as you approach 36”, and stretch them by bouncing/laying on them and see how that works for you. Letting them rest for a bit would probably work well too.

                      Comment

                      Working...