Silent balloon pumps

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    Silent balloon pumps

    Hello Fellow looners,

    I have tried for many years to find a very silent pump 0-32 db, but cant seem to find one.
    Does anyone of you know any secrets or where i can find a said pump?

    Hope you can help.
    Thank you
    /Danish
  • Thinskinned
    Look Out!
    • Jul 2024
    • 247

    #2
    Fundamentally the problem is that inflating balloons requires pressure, and inflating them quickly requires volume, and a machine that does both pressure and volume is going to be loud. A pond pump is probably as quiet as you're going to be able to get from a pump perspective, but they are expensive as pumps go, and not particularly fast compared to a $20 amazon balloon pump. Using a compressor to fill a tank with compressed air and then using that compressed air to inflate will be quieter, but there will be sound from the pressurized air rushing out.

    Comment

    • Loonerloon99
      Junior Member
      • Sep 2021
      • 11

      #3
      I honestly think it is very possible to build one for this purpose. I have a CPAP machine that does the job for very large re-inflations. Like a cattex long neck or any of the gl series. Super quiet, moves a lot of air, a fully inflated longneck in about 15 seconds... The machine is way to expensive to be a balloon pump, but... It definitely works.

      Comment

      • UNicorn Hero120
        Member
        • Jun 2022
        • 51

        #4
        I built one myself with some extra features but its was too expensive to be commercial. When you just focus on the pumps its about 200$ still not cheap but definitly quiet, you cant hear it out of the room.

        for reference: It can pop a 11" Balloon in about 12 seconds. Max pressure is about 350mBars

        For extra features it can: Measure the flow, volume, pressure, and regulate the flow to a value everywhere between 1-80L. But only material cost are about 1300$, not including tools and labor. So way to expensive for most hobbiest.

        Comment

        • Ballon
          Junior Member
          • Dec 2020
          • 3

          #5
          UNicorn Hero120
          What's the $200 turbine that's silent?

          Do you have a link?

          Thanks.
          Last edited by Ballon; 15-06-2025, 19:38.

          Comment

          • cl23
            Senior Member
            • May 2022
            • 381

            #6
            Originally posted by UNicorn Hero120
            I built one myself with some extra features but its was too expensive to be commercial. When you just focus on the pumps its about 200$ still not cheap but definitly quiet, you cant hear it out of the room.

            for reference: It can pop a 11" Balloon in about 12 seconds. Max pressure is about 350mBars

            For extra features it can: Measure the flow, volume, pressure, and regulate the flow to a value everywhere between 1-80L. But only material cost are about 1300$, not including tools and labor. So way to expensive for most hobbiest.
            That sounds very interesting, because i build a similar machine. Would you like to share more infos or pictures?

            I build my machine with very low material cost, but it took many hundreds, if not thousands of hours of work over the years. I add features every now and then and last month, i designed and built a secondary machine from 3d printed parts, that makes the inflator abled, to inflate up to 36 balloons (8-19" balloons or about 20 giant balloons - i only tested 3 foot balloons so far) in a row fully automatically by a push of one button on the wireless controller (it also has bluetooth for smartphone app and serial connection). The balloons all keep their air due to super lightweight check valves i designed, but for sure, it can pop them all as well.

            There are no very expensive components in my balloon inflator, but it did not need any repairs in about 10 years of weekly use. The 500 Watts blower is from an old but very sturdy whirpool device, i got used for 20 bucks, an automotive mass airflow sensor from a Ford Fiesta (i had to make a characteristic curve on my own by measuring a lot), some cheap electronics and wood, because i had no 3D printers back then

            The most expensive parts were the four American made high quality solenoid valves (about 20-30 USD each). The device features two separate outputs with pressure sensors and can also deflate balloons on these. Output volume also can be adjusted from 1 (very SILENT except the beefy solenoid valves that can handle that flow) up to about 350 liters per minute (similar noise level to vacuum cleaner). One output has a sensor, that is triggered, when the balloon has a fully inflated neck.
            Most work was the software for the microcontrolller (about 10 000 lines of code). It supports a very simple language to run custom programs i can create in a smartphone app, e.g. inflate the balloon to 20 liters, deflate, then loop and increase amount of air by 2 liters on every loop. It detects, when a balloon pops.
            The right tool for getting the maximum size out of balloons with repeatable methods.

            In the first picture you can see, that there is also an extra direct ouput from the blower without sensors, solenoids etc. for maximum airflow. It fully inflates that 12" balloon in less than 3 seconds. I love controlling the blower speed with an analog stick on the controller - so much fun

            DualInflator.jpg IMG_20200722_215225.jpg 7.jpg
            The machine is featured on my YouTube Channel if your interested and i will also upload videos of the new machine i build last month.


            Comment

            • UKPOPPER
              Senior Member
              • Feb 2023
              • 492

              #7
              I got a low powered pump on Amazon that is powerful enough to pop balloons and quieter than those standard electric balloon pumps that you see everywhere. It also has a handy on/off rocker switch (and I have connected it to a smart plug before for hands free play). The trade-off is that it inflates slower but that's a benefit in my opinion because it allows more time for the anticipation/fear to build - and if I am being perfectly frank because I sometimes like to stuff inside my clothing and feel the inflation and tightness - and slower inflation allows more time for the latex to stretch which tends to result in a more catastrophic burst. Here's a link. It's not super quiet but if you stick it on a length of hose and shove it under a pillow/in a box or drawer (without letting it overheat) or outside a door then it is quiet enough to allow you to experience a good loud bang without sounding like an aircraft taking off. 😱🎈💢

              I have also experimented with those pump bottles that you prime by hand and use to spray plants/car. I've only used a 2 litre bottle which can pop water balloons so just have the hiss of air as you'd get from a pressured gas canister. Finally, I don't own one but a pancake compressor can be purchased relatively easily and works by compression air into a chamber. Once primed, you switch off the electricity and can pop a balloon using the compressed air. It's a bit too industrial my needs but probably the ultimate in quiet pumping without resorting to buying lots of compressed air canisters.

              HTH

              Just one more puff...🎈

              Comment

              • SAF
                Senior Member
                • Nov 2019
                • 168

                #8
                I got this and it works fast with huge balloons like weather balloons and GL1200s. Works well on TT17 and any 36" i have inflated. It's much quieter than anything else I have used.

                Comment

                • Ardov3275
                  Senior Member
                  • Mar 2024
                  • 133

                  #9
                  If I want quiet, I use a compressor. For lots of balloons, I run an air hose from my garage, through my house to the room I will be playing in. It is loud when it kicks on, but is outside, in the garage, hardly hear it. If it is just a few I want to blow up, I will pull the compressor inside. It is larger, 20 gallon I think, but on wheels. It is nice to sometimes just hear the air going in, latex stretching and staining, and fun to just keep going until they pop.

                  Comment

                  • UKPOPPER
                    Senior Member
                    • Feb 2023
                    • 492

                    #10
                    If it wasn't so expensive I would just have tanks of helium. Psst...bang! 😄
                    Just one more puff...🎈

                    Comment

                    Working...