Pump Recomendations

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • junkers10130
    Member
    • Mar 2015
    • 54

    Pump Recomendations

    Hi, I was wondering if anyone can recommend a good pump for inflating balloons. I am looking for something that can handle even really big balloons and preferably has a way to attach an air hose to it. Also, if anyone has any recommendations on what to use as an air hose then I would be very grateful to hear them. I hope everyone has a nice day.
  • AlterPlatzer
    Senior Member
    • Jun 2024
    • 1528

    #2
    I saw a guy using one of these on YouTube and decided to get one.

    It's not exactly cheap, but it will inflate just about anything.

    Since it's not specifically intended for balloons, it's good for people that are a bit shy about their love of balloons.

    It's OK to love balloons.
    There are as many differences in preferences as there colors of balloons. Accentuate what makes us the same and not what sets us apart.

    Comment

    • Looner Greg
      Member
      • Mar 2022
      • 73

      #3
      I started with an old hand vacuum cleaner which was quiet but slow. Next I used a Coleman inflator pump for air mattresses for some years. Last year, that simply quit so I went to Dick’s (heh) and bought an Intex inflator pump that runs on 120v. I like the Intex, as it’s quieter than the Coleman which used to shriek when running; load or no load. The Intex was very affordable. So that’s my four cents (inflation 😉).

      Comment

      • balloonpopper7
        Member
        • Oct 2020
        • 30

        #4
        This is perhaps the best balloon pump money can buy, as seen on many european looner videos.

        Seit 1974 entwickelt, produziert und vertreibt die ZIBI GmbH mit Sitz im Süddeutschen Bad Säckingen Ballonzubehör: Aufblasgerät, Ballon-Schnellverschlüsse und -Haltestäbe, die Sie hier online einkaufen können. Auch ein Miet- und Reparaturservice steht Ihnen zur Verfügung.

        Comment

        • RickStreets23
          Junior Member
          • May 2018
          • 13

          #5
          The pump I use and the one I highly recommend is the XPower A-5 Duster. It's not terribly loud and does inflate large balloons rather quickly. The hose it comes with is very long (5 Feet) and it also has 2 speeds. I've actually plugged the pump into a remote controlled plug that allows me to turn the pump on and off while riding. The only downside I've encountered with the pump is how warm the air becomes after running it for a couple of minutes. That can help stretch balloons, but doesn't seem very good for the life of the pump itself.

          Comment

          • junkers10130
            Member
            • Mar 2015
            • 54

            #6
            Thank you all for the recommendations, after doing some more research online I decided to go the expensive route and bought a pond aeration pump. It is extremely quiet, less then 40 decibels and while I have only had time to do a few test inflations, it had no problem inflating the 24" and 40" that I tested it with. I bought 10' of hosing, a check valve, and a remote controlled power outlet to turn it on and off at will. All told it came out to about $150 but so far I am happy with my decision, I will post an update when I have a chance to put it to the test with more balloons.
            IMG_1419.jpg

            Comment

            • Auxiliary
              Jack of all hobbies
              • Feb 2025
              • 51

              #7
              Originally posted by junkers10130
              I will post an update when I have a chance to put it to the test with more balloons.
              Ooh, when you get the chance to test it more could you time how long it takes to inflate a balloon to a determined size? That way you can figure out the litres per minute. I'm curious if it'll get more than just a small foot pump or manual pump.

              Comment

              • Helium Guy
                Senior Member
                • Dec 2019
                • 256

                #8
                I have had great success with the Home Depot, "Stinger" Wet/Dry Vacuum/Blower
                Attached Files

                Comment

                • junkers10130
                  Member
                  • Mar 2015
                  • 54

                  #9
                  Originally posted by Auxiliary
                  Ooh, when you get the chance to test it more could you time how long it takes to inflate a balloon to a determined size? That way you can figure out the litres per minute. I'm curious if it'll get more than just a small foot pump or manual pump.
                  Unfortunately, I haven't had the chance to inflate any balloons since then but the manufacturer says that it has a 90L/min flow rate.

                  Comment

                  • Auxiliary
                    Jack of all hobbies
                    • Feb 2025
                    • 51

                    #10
                    90L/min isn't too bad. At that speed it would be about 4.25 minutes to inflate a 36"er, but maybe longer depending on how well it can handle back-pressure. How much noise does the pump make?

                    Comment

                    • junkers10130
                      Member
                      • Mar 2015
                      • 54

                      #11
                      Originally posted by Auxiliary
                      90L/min isn't too bad. At that speed it would be about 4.25 minutes to inflate a 36"er, but maybe longer depending on how well it can handle back-pressure. How much noise does the pump make?
                      It's extremely quite, just a soft humming sound. It took about 3 minutes to inflate a China 36" balloon, granted the balloon wasn't inflated to the max since the balloon is a little old and my neighbors were home and I didn't want to risk a pop. Here is a link to the video on Google Drive.

                      Comment

                      • Bastika Loonpop
                        Junior Member
                        • Mar 2018
                        • 28

                        #12
                        I modified the HT - 508 pump. I added a button like on the Zibi pumps and installed a nipple instead of one outlet so that a hose could be connected.
                        The pump is noisy, but inflates quickly

                        IMG_20250331_074424.jpg IMG_20250331_074436.jpg

                        Comment

                        • Auxiliary
                          Jack of all hobbies
                          • Feb 2025
                          • 51

                          #13
                          The aeration pump just plugs into a regular outlet right? Also what sort of hose attachment does it have?
                          If it really is that quiet then I ought to get one myself for balloons and inflatables. Manual is a little challenging. What sort of pressure is it rated to btw? I'd love if I could sit on a loon or infla while it's being inflated.

                          Comment

                          • junkers10130
                            Member
                            • Mar 2015
                            • 54

                            #14
                            Originally posted by Auxiliary
                            The aeration pump just plugs into a regular outlet right? Also what sort of hose attachment does it have?
                            If it really is that quiet then I ought to get one myself for balloons and inflatables. Manual is a little challenging. What sort of pressure is it rated to btw? I'd love if I could sit on a loon or infla while it's being inflated.
                            I think it's between 4 and 5 psi, should be more than enough for that. It dose plug into a normal outlet but you will need to get something to turn it on and off since it doesn't have a built-in power switch, I just bought a remote controlled plug in that is meant for outdoor lights, it just plugs into the wall outlet and then you plug the pump into the adapter and you can use the remote to turn it on and off at will.

                            If you are going to get one I would recommend getting one with a higher flow rate, this one is rated at 90L/Minute and it takes about 3 minutes to inflate a China 36" to a good size, so I would take a while to inflate multiple large balloons.

                            For hose attachment it has a brass fitting that threads on that you can attach a hose to, but I just attached a hose over the outlet pipe and put a hose clamp on it.

                            Comment

                            • HockeyLooner
                              Member
                              • May 2024
                              • 55

                              #15
                              Originally posted by RickStreets23
                              The pump I use and the one I highly recommend is the XPower A-5 Duster. It's not terribly loud and does inflate large balloons rather quickly. The hose it comes with is very long (5 Feet) and it also has 2 speeds. I've actually plugged the pump into a remote controlled plug that allows me to turn the pump on and off while riding. The only downside I've encountered with the pump is how warm the air becomes after running it for a couple of minutes. That can help stretch balloons, but doesn't seem very good for the life of the pump itself.

                              https://www.amazon.com/XPOWER-Inflat...076VVTZMJ?th=1
                              I recently purchased this based off your recommendation and it is the best inflator I’ve ever had. It’s pretty quiet. I also partnered it with a foot switch so I have more control while inflating. I can’t thank you enough!

                              Comment

                              Working...