A new balloon unlocked - gl700

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bigballoonlover
    Junior Member
    • Feb 2025
    • 11

    A new balloon unlocked - gl700

    Off the back of my recent first post “how tight is tight” tonight I decided to venture into my, long time coming - never happens, pursuit to become a full fledged sit popper. My original post was to gain feedback on how tight a b350 should be and still be *safe to sit on. The consensus was I was under inflating my balloons.

    After countless hours of research on here, watching videos & looking at manufacturers websites I decided to try something new. I have some (as it turns out) hardly used gl balloons that I have never been particularly fond of at my disposal and they were going to be my test subjects.

    Having checked what the circumference of a GL700 at rated size should be, I got a bit of string and tied it off at this size to form a loop. I then inflated a GL how I would normally to a comfortable size and clipped it off. I then slipped the string around the ballon as a size gauge and I was amazed at how under inflated it was.

    I’ve seen so many people say to trust the product, so that is exactly what I did. I inflated it all the way up until the string was snug around it. (Heart absolutely pounding) and clipped it off again. At this point the balloon was incredibly firm. Tentatively I climbed on top of it and applied more and more weight, legs virtually shaking at the almost inevitable pop at any moment. However it never came, after a few minutes I was bouncing pretty damn hard. Then I remembered a post where someone mentioned they kept topping their balloons up to keep them tight, so this is what I did, connecting the pump again and calmly counted down from 10. Tentatively applied my weight slowly but surely and no pop, few minutes of riding, another 10 seconds, bit more riding another 10 seconds. By the last time I was confident the end was only moments away for the GL as I practically fell onto it with all my weight - rock solid but incredibly bouncy. Some time passed and lets just say the GL lasted longer than I did. Once I had gotten off the balloon and stood back to admire it, I realised this 700 was way bigger than I’d ever taken a 1200 to. I’ve essentially been used to a ridiculously undersized 500, a 700 at the size of a 500 & a 1200 at the size of a 700. So I feel like I’ve unlocked an entirely new balloon - a gl1200 but actually inflated to full size. And the strange thing is, if it had popped whilst rock hard, I really wouldn’t have cared in-fact I was getting excited at the prospect of it letting go at any moment - however before I was just trying to finish the session as quickly as possible to get off a limply inflated balloon incase it accidentally popped. It was like playing a whole exciting game to see how much it could handle, It was an entirely different experience all together and I think I’m starting to get it now.

    The whole experience reminded me of the thrill I got when sitting on a large balloon for the very first time over 10 years ago, after waiting so long to try it myself. And has completely refreshed my love for bouncing and riding, it may sound stupid but I’ve never experienced a truly tight balloon until today. And it was amazing.

    I guess what I’m trying to say in a round about way, the advice from this site has helped me massively in my looner journey, and if this long winded story can be any help to someone else having the same questions or the same fears as I did. Trust the product, push your self out your comfort zone (and the balloon) and enjoy it well and truly.
  • bigloonfucker.cz
    Punk member
    • Nov 2023
    • 145

    #2
    Was it cattex or rifco one? I know this, when one is patient, balloon can reach enormous sizes
    The softer balloon the better. When not soft enough, I bake him untill success

    Comment

    • BalloonFun
      Senior Member
      • Apr 2022
      • 326

      #3
      Originally posted by Bigballoonlover
      Off the back of my recent first post “how tight is tight” tonight I decided to venture into my, long time coming - never happens, pursuit to become a full fledged sit popper. My original post was to gain feedback on how tight a b350 should be and still be *safe to sit on. The consensus was I was under inflating my balloons.

      After countless hours of research on here, watching videos & looking at manufacturers websites I decided to try something new. I have some (as it turns out) hardly used gl balloons that I have never been particularly fond of at my disposal and they were going to be my test subjects.

      Having checked what the circumference of a GL700 at rated size should be, I got a bit of string and tied it off at this size to form a loop. I then inflated a GL how I would normally to a comfortable size and clipped it off. I then slipped the string around the ballon as a size gauge and I was amazed at how under inflated it was.

      I’ve seen so many people say to trust the product, so that is exactly what I did. I inflated it all the way up until the string was snug around it. (Heart absolutely pounding) and clipped it off again. At this point the balloon was incredibly firm. Tentatively I climbed on top of it and applied more and more weight, legs virtually shaking at the almost inevitable pop at any moment. However it never came, after a few minutes I was bouncing pretty damn hard. Then I remembered a post where someone mentioned they kept topping their balloons up to keep them tight, so this is what I did, connecting the pump again and calmly counted down from 10. Tentatively applied my weight slowly but surely and no pop, few minutes of riding, another 10 seconds, bit more riding another 10 seconds. By the last time I was confident the end was only moments away for the GL as I practically fell onto it with all my weight - rock solid but incredibly bouncy. Some time passed and lets just say the GL lasted longer than I did. Once I had gotten off the balloon and stood back to admire it, I realised this 700 was way bigger than I’d ever taken a 1200 to. I’ve essentially been used to a ridiculously undersized 500, a 700 at the size of a 500 & a 1200 at the size of a 700. So I feel like I’ve unlocked an entirely new balloon - a gl1200 but actually inflated to full size. And the strange thing is, if it had popped whilst rock hard, I really wouldn’t have cared in-fact I was getting excited at the prospect of it letting go at any moment - however before I was just trying to finish the session as quickly as possible to get off a limply inflated balloon incase it accidentally popped. It was like playing a whole exciting game to see how much it could handle, It was an entirely different experience all together and I think I’m starting to get it now.

      The whole experience reminded me of the thrill I got when sitting on a large balloon for the very first time over 10 years ago, after waiting so long to try it myself. And has completely refreshed my love for bouncing and riding, it may sound stupid but I’ve never experienced a truly tight balloon until today. And it was amazing.

      I guess what I’m trying to say in a round about way, the advice from this site has helped me massively in my looner journey, and if this long winded story can be any help to someone else having the same questions or the same fears as I did. Trust the product, push your self out your comfort zone (and the balloon) and enjoy it well and truly.
      Did YOU pop?? 😆

      Comment

      • Bigballoonlover
        Junior Member
        • Feb 2025
        • 11

        #4
        Originally posted by bigloonfucker.cz
        Was it cattex or rifco one? I know this, when one is patient, balloon can reach enormous sizes

        cattex, although I’m glad you’ve mentioned this as I was wondering which one was stronger. No pop yet but it’s been getting massive, solid & very bouncy

        Comment

        • bigloonfucker.cz
          Punk member
          • Nov 2023
          • 145

          #5
          Yeah, the way of your looning you described is same as mine so I know what are you talking about
          The softer balloon the better. When not soft enough, I bake him untill success

          Comment

          • Bigballoonlover
            Junior Member
            • Feb 2025
            • 11

            #6
            Update - I had it inflated to almost the size of a fully inflated gl1200 (as I had done the 2/3 previous times) sat down comfortably and just as I was starting to relax it let go. It had taken a lot of over inflation & hard bouncing.

            Comment

            • bigloonfucker.cz
              Punk member
              • Nov 2023
              • 145

              #7
              Yes, when gl's are good prestretched, they could be overinflated and ridden hard. The brand Gemar produces gl500 and gl700 too but that aren't as good as cattexes or rifcos. My fav. became gl900 which produces only rifco. Rated size is 120cm, but you can ride it even at >200cm. Very very durable
              The softer balloon the better. When not soft enough, I bake him untill success

              Comment

              Working...