My Pump Idea

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hblooner
    Helium Fiend
    • Dec 2023
    • 137

    My Pump Idea

    So I've seen a couple questions come up about creating a pump that is silent. Most pumps on the market are electric and use motors to force air through the nozzle. This results in pump being loud either due to the motor or the vibration itself.

    The other options are having an air compressor which are also loud. I did see a user has a brilliant set up of having the tank in a separate room and having the hose be fed into the room it's used in. However, this isn't ideal for most of us or is too expensive. The other option is a pond pump or similar, but if you are like me, you enjoy the sound of a balloon being inflated like from a tank.

    Additionally, the pond/aquarium pump isn't completely silent and does vibrate. Which is remedied by placing it on something that absorbs sound like foam or something similar.The next thing would be something like a air tank, helium tank or CO2 tank.
    However, these can be rather expensive and can be bothersome to get refilled and cost money. These are my thoughts, a paintball tank or something similar and an air gun pump. The paint ball tank can hold 3000 PSI (though you won't need that much I hope). And the air gun pump allows it to be refilled on the whim (just not very fast).

    Paintball tanks have a ASA fitting and my goal is have it connect to helium tank regulator valve which commonly uses CGA580 fittings. So I got an ASA to CGA320 to CGA580 convertors. This will fit to a cheap RX weld helium tank valve. If I've gotten all the right parts, which I'm sure I have I should be able to take the high pressure from a paintball tank (800 PSI usually) and reduce it down to 2-3 PSI.

    It should do 2 things, reduce the sound significantly and produce that euphoric sound of a balloon being inflated by a helium tank (at least to me).All the parts I ordered should be here on Sunday so I can test it then. Realistically all I need is about 100-300 PSI (normal range for helium tanks) in the tank so I won't be working with high pressure, well as high pressure a paintball tank uses normally.

    ​​​​​​Disclaimer, this is not that cheap, it came out to 150 USD and I mainly did it as an experiment. But I'll give an update on Sunday if it all works and as expected.
  • hblooner
    Helium Fiend
    • Dec 2023
    • 137

    #2
    Lol and then I came across this: https://www.amazon.com/dp/B01LYHYHEA... 56 decibals and small enough to hide...

    Comment

    • john1bl
      Senior Member
      • Jan 2014
      • 124

      #3
      If you are in the USA look at Harbor Freight for a quite compressure.

      Comment

      • Auxiliary
        Jack of all hobbies
        • Feb 2025
        • 51

        #4
        I was under the impression that paintball tanks usually are pressurized with CO2 making refills cost some money? Having a standalone tank might still be quite nice depending on what you're using this pump for, something you can move around and connect with a shorter, more manageable hose? I've no experience with them but do be careful downregulating 300+ PSI down to 2 PSI. Check carefully that your regulator is accurate down to such a small number and that the resulting jet isn't too aggressive, not that you end up with a supersonic 10 PSI jet and end up with holes in what you're inflating (fun fact: 80PSI from a regular compressor can form mach diamonds).

        In case you haven't seen it, another avenue you could explore would be equipment for modding soda-streams or for kegging? I've seen many fittings for plumbing all manner of standard CO2 tanks. Although I'd be careful to not fill CO2 dedicated tanks with regular air until you've checked any accompanying risks.

        If you've already ordered the trove of stuff it would still be cool to see an update on how it all came together. I'm sure there's someone on here who needs something exactly like what you've described.

        Comment

        • Ardov3275
          Senior Member
          • Mar 2024
          • 133

          #5
          I talked my wife into a compressor several years ago. If you drive old crappy cars like we do, we were spending a small fortune feeding quarters into the compressor at the local gas station, which was broken half the time. It is also useful for home improvement projects and winterizing my camper. Picked up some hoses. I was putting a new roof on my house, needed some longer hoses. I currently have two, one is a little two tank one, easy to carry to friends houses when they want to borrow it for their projects, and a much larger one, that has wheels.

          ​​​​​Now I have enough hose to run from my garage, to my bedroom on the other end of my house. Just coil up the hose as I walk back to the garage, hang it in the wall (or for a few balloons just walk them to the garage, blow them up there). It is an unlimited supply of air. Before I got the long hose, I would carry or roll the air compressor to the bedroom. If it is off, or not plugged it, there is no noise, have 4-10 gallons of air at 100 psi. I honestly don't remember how many balloons one tank would blow up, but a good number. Because of the noise from the compressor, I rarely ran it inside, almost always ran it back to garage for a "refill" if I needed more.

          My "concern" with your project, although I am very interested, is the small amount of air (or CO2) you are able to store. Even at high pressure, I would imagine it will be drained pretty quickly (I do not know paint guns, but they don't seem to have big CO2 cylinders attached to them). But please, let us know how it turns out. I do love the sound of balloons being blown up on a tank like set-up.

          Comment

          • hblooner
            Helium Fiend
            • Dec 2023
            • 137

            #6
            I'm laughing currently. It works. And makes the noise I'm expecting. Small tank and I didn't fill it all the way just to 100 psi out of 4500. I need to make it more air tight with some Teflon tape. I filled 1 cattex green 12 inch. But otherwise if I fill this up a lot more I can easily get 5 or 6 12 inches. Nothing fancy but funny that it works.
            ​​​​​
            Attached Files

            Comment

            Working...