Latex on Cattex 32’’ Long neck

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Hazloon24
    Senior Member
    • Jun 2023
    • 150

    Latex on Cattex 32’’ Long neck

    IMG_1295.jpg
    Hi all,

    As mentioned in previous posts I am not a fan of popping most of the time, so I wanted to get some opinions on this 32’’ Cattex I have.

    on the body of the balloon towards the upper side, it looks like the Latex has stuck together, sort of like if you pinch something sticky together.

    I have been wanting to try and inflate this for some time, but I am concerned that it might not make it to a decent size if that is something that will affect its integrity.

    Thank you!

  • bigloonfucker.cz
    Punk member
    • Nov 2023
    • 145

    #2
    If the area around isn't significantly thinner and you prestretch balloon by inflating not to fullsize 3 or 4 times, i think there's no risk of popping. When the window appears after inflating, you can patch that place by piece of thinner latex from popped balloon (on deflated balloon)
    The softer balloon the better. When not soft enough, I bake him untill success

    Comment

    • Hazloon24
      Senior Member
      • Jun 2023
      • 150

      #3
      Originally posted by bigloonfucker.cz
      If the area around isn't significantly thinner and you prestretch balloon by inflating not to fullsize 3 or 4 times, i think there's no risk of popping. When the window appears after inflating, you can patch that place by piece of thinner latex from popped balloon (on deflated balloon)
      Thank you for the response. It is a confusing one for me, I do not think its a window, its where the latex must have been squished slightly whilst drying. Are you suggesting that as it inflates, it will create a window from where it will expand?

      Comment

      • Unicks
        Senior Member
        • Nov 2020
        • 103

        #4
        Hazloon24 I see from your photo what you are saying, these self vulcanized pinches can go either way... but like yourself, I'm also an inadvertent popper.. so the stress in the situation is definitely there.

        I've taken the balloon and stretched the defect out with my fingers on the mating or pinched side pressing outward with a little talc for lube, most of the time the layers will separate without issue. Just be gentle when the latex starts to get thin.. rub the talc in there too so it wont stick back together.

        As far as durability.. the film has been compromised and is no longer smooth with the surrounding surface, so it can be bad as a "church window" defect or an abrasion. Most of the time the latex popps apart and you rub a little talc on both sides and you're done. I've only had a problem when the latex is thin and had multiple inflations, like a balloon you blew up and got wet and didn't dry it off before storing. They will self vulcanize or adhere to itself where the latex is raw and folds with any force.. talc is your friend here.

        Good luck!

        U

        Comment

        • Hazloon24
          Senior Member
          • Jun 2023
          • 150

          #5
          Originally posted by Unicks
          Hazloon24 I see from your photo what you are saying, these self vulcanized pinches can go either way... but like yourself, I'm also an inadvertent popper.. so the stress in the situation is definitely there.

          I've taken the balloon and stretched the defect out with my fingers on the mating or pinched side pressing outward with a little talc for lube, most of the time the layers will separate without issue. Just be gentle when the latex starts to get thin.. rub the talc in there too so it wont stick back together.

          As far as durability.. the film has been compromised and is no longer smooth with the surrounding surface, so it can be bad as a "church window" defect or an abrasion. Most of the time the latex popps apart and you rub a little talc on both sides and you're done. I've only had a problem when the latex is thin and had multiple inflations, like a balloon you blew up and got wet and didn't dry it off before storing. They will self vulcanize or adhere to itself where the latex is raw and folds with any force.. talc is your friend here.

          Good luck!

          U
          That is what I am afraid of. It is a big balloon and I do not want it to go that way if I were to inflate it up towards its intended size. I guess it happened during the manufacturing process, as the balloon has been like that since I took it out of the zip bag from my order.

          It is a shame, I really want to inflate it, especially for the neck but I just do not like that risk. I tried using my thumbs to gently pry it apart, but it stayed how it was for the most part. I will try to use some lube/powder to see if I can find a better result.

          I guess I will use as for a bit of fun at a much smaller size, and perhaps look to purchase another in the future. The stress and fun of being a looner!

          Comment

          • LoonerHoax
            Senior Member
            • May 2020
            • 521

            #6
            I found something similar on a TT36 tonight. It was about 2 inches long. I had fully inflated the loon with neck and was bouncing on it for a while with no ill effects.

            Comment

            Working...