Playing with an already-popped balloon

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • frankfrank
    Empathetic Harmonizer
    • Feb 2018
    • 312

    Playing with an already-popped balloon

    Does anybody find it even more of a turn-on to play with a balloon that has already been popped? Perhaps it's the neck that was popped, and the bulb part is intact, and there's enough bulb to get large enough to justify playing with, with room to twist it closed. Of course most popped balloons are "finished" but not always.

    I do find it to be a stronger turn-on that the balloon was popped, but it still suitable for play.
    People who don't know the difference between BURRO and BURROW, can't tell their ass from a hole in the ground.


    There's been a lot of thefts of helium-filled balloons recently. More so than in the past, so they're going up. I think inflation is to blame.

    "Some people without brains do an awful lot of talking." - The Scarecrow, WIZARD OF OZ, 1939
  • Dude1234
    Senior Member
    • Sep 2017
    • 356

    #2
    I have noticed I like to mess around with popped balloon bits like a fidget toy. It also is a turn on watching a woman play with the bit of balloon she just popped

    Comment

    • LoonPopper
      Senior Member
      • Aug 2011
      • 772

      #3
      or suck on the latex to make rubber bubbles and pop those, just have to be careful not to suck it into your throat though
      Blow, Baby, Blow...when will it pop nobody knows!

      Comment

      • LoonerHoax
        Senior Member
        • May 2020
        • 521

        #4
        I was sitting on a doll balloon the other night and the top of its head popped. I tied it off at the neck and blew the body back up. Sat on that until it too popped.

        Comment

        • bigloonfucker.cz
          Punk member
          • Nov 2023
          • 145

          #5
          When minimum a half sphere of balloon reminds, i take a pipe cover 10cm (3-4") in diameter and tie the rest of balloon on it with rubber band cutted from old loon. And this can last much longer than default balloon because there is already no weakspot which caused balloon pop and that latex sheet is already stretched enough. Usually this can take much more rough riding. No water must get into the joint, otherwise the balloon will loosen, rubber band must be very tight and wrapped many times.
          The softer balloon the better. When not soft enough, I bake him untill success

          Comment

          • Loon119
            Senior Member
            • Jun 2018
            • 494

            #6
            My wife usually likes to keep the popped balloons and uses the shards to run or rub over me as the rubber turns me on

            Comment

            • Kbeecher
              Member
              • Jan 2018
              • 76

              #7
              Originally posted by Loon119
              My wife usually likes to keep the popped balloons and uses the shards to run or rub over me as the rubber turns me on
              My wife has long known that the feel of latex without lube during a massage or handjob drives me wild. We have a supply of Perry Style 42 Surgical Gloves she uses for these times.

              just a few months ago after stomping on some 12 inch balloons with her super worn out tennis shoes she gathered up the shreds of latex, then one by one draped the larger pieces over my erect penis and gave me a handjob while rubbing them softly against me.

              Comment

              • Loon119
                Senior Member
                • Jun 2018
                • 494

                #8
                Latex gloves are always good

                Comment

                • cl23
                  Senior Member
                  • May 2022
                  • 381

                  #9
                  I always inflate all the fingers of latex gloves, that i popped.
                  That also applies to the ears etc. of figurine balloons like bunnies (most are really tough, because of thicker latex).
                  I will inflate everything remaining, that can be inflated and sometimes glue different parts together to create a new balloon.

                  Sometimes, i even glue parts of popped printed balloons to new balloons like shown in my video:



                  Comment

                  • Hotel Staff Member
                    Chairman of Hotel Lavanza
                    • Oct 2024
                    • 66

                    #10
                    Originally posted by LoonerHoax
                    I was sitting on a doll balloon the other night and the top of its head popped. I tied it off at the neck and blew the body back up. Sat on that until it too popped.
                    How much did it cost?
                    From 1-5, how would you rate my service?

                    Hotel Lavanza is always looking for new clients! We pride ourselves on cleanliness and management.

                    Comment

                    • lucid
                      Senior Member
                      • Sep 2016
                      • 1174

                      #11
                      Originally posted by cl23
                      I always inflate all the fingers of latex gloves, that i popped.
                      That also applies to the ears etc. of figurine balloons like bunnies (most are really tough, because of thicker latex).
                      I will inflate everything remaining, that can be inflated and sometimes glue different parts together to create a new balloon.

                      Sometimes, i even glue parts of popped printed balloons to new balloons like shown in my video:


                      Now that's the coolest thing I've seen in a very long time! Will you please teach me your ways : )

                      What kind of glue do you use for this?
                      Do you completely coat the underside of the popped balloon or just run a bead around the edges?
                      And do you do this when the balloon being blown up is uninflated or partially inflated?

                      I would love to try this myself.
                      your channel is friggin awesome btw. Thanks for sharing

                      Comment

                      • cl23
                        Senior Member
                        • May 2022
                        • 381

                        #12
                        lucid
                        Thanks for the kind words. There will be more similar content in the future and i will build larger scale balloon sculptures by gluing parts of balloons together.
                        I also loved this experiment. The sounds, the balloon makes, when being inflated, is so exciting.

                        You can use regular rubber cement, after cleaning both pieces (i use alcohol).
                        Liquid latex can also be used for gluing balloons together.
                        I coated the complete underside of the red part and glued it on the uninflated yellow balloon.

                        The edges should be covered with glue completely, otherwise, the latex parts might or might not tear apart. Sometimes, it makes it more exciting, if it is not done properly

                        Comment

                        • Bella 😉🎈
                          Junior Member
                          • Nov 2024
                          • 10

                          #13
                          I was sitting on a doll's balloon last week and the top of his head popped. I tied it to my hand and blew the body back up. I sat on it until it popped too. It's a new experience for me but I'm starting to like it.

                          Comment

                          • lucid
                            Senior Member
                            • Sep 2016
                            • 1174

                            #14
                            Originally posted by cl23
                            lucid
                            Thanks for the kind words. There will be more similar content in the future and i will build larger scale balloon sculptures by gluing parts of balloons together.
                            I also loved this experiment. The sounds, the balloon makes, when being inflated, is so exciting.

                            You can use regular rubber cement, after cleaning both pieces (i use alcohol).
                            Liquid latex can also be used for gluing balloons together.
                            I coated the complete underside of the red part and glued it on the uninflated yellow balloon.

                            The edges should be covered with glue completely, otherwise, the latex parts might or might not tear apart. Sometimes, it makes it more exciting, if it is not done properly
                            Thanks so much for your help my friend. This is gonna be pretty exciting haha. Planning to do some experimenting this weekend. I've actually got some rubber cement laying around and I'll throw in some liquid latex with my next scamazon order. Is there any particular varient, type or brand of liquid latex I should be looking for? I'll quit hounding you about it after this haha. I just think it's pretty cool. I'm thinking bits of crystal balloons glued to clear balloons would look amazing. Like polka dots or something. Guess I'll find our soon enough. Thanks again man the info is super appreciated.

                            Comment

                            • cl23
                              Senior Member
                              • May 2022
                              • 381

                              #15
                              lucid
                              No problem
                              You need prevulcanised liquid latex. It contains ammonia (don't breath the fumes, what also applies to the fumes of rubber cement. Both disappear after a while).
                              Ah, polka dots are great:

                              p3.jpg
                              Scultpures of clear balloons look fantastic:
                              hk3.jpg s2.jpg

                              You can make caterpillars, as long and colorful as you want, for sure you can use larger balloons than the 12 inch i used here:
                              k17.jpg
                              And as in the video, i glued some pandas from a bursted balloon to a plain red balloon. Looks so messy, but i liked it:
                              p2.jpg
                              You can combine parts of bursted balloon and make a collage on a new one

                              Comment

                              Working...