Sanitising balloons

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Hazloon24
    Senior Member
    • Jun 2023
    • 150

    Sanitising balloons

    Hi all,

    An experience yesterday got me wondering, how other looners may clean balloons?

    I ask, as I can assume for other mostly non-poppers like myself, that reusing balloons for some fun time may cause them to become dirty, sticky etc.

    I like to reuse them as much as I can, but I am always concerned about hygiene etc., so I use soap based products, but I am not sure if that is suitable.

    How do you sanitise balloons after use, especially if cum is involved?

    Curious to find out from you all.

    Thanks
  • Loon119
    Senior Member
    • Jun 2018
    • 494

    #2
    I've never really bothered. I just use a tissue or towel to wipe off the excess and get them as dry as possible and that's pretty much it. I kind of like the dry streaks because it shows it's been well used. I dry my balloons well just because sometimes I sleep with them and don't want cum getting on me and also don't want it stuck to other stuff tbh. I once tried to use sex toy wipes but it ended up making the balloon sticky and I didn't like it. Also another cleaner was labelled as latex safe, I sprayed it on and my balloon disappeared faster than a pin pop. So now I just use a towel or tissue. If I'm in a hotel, camping, at a relatives house or similar I'll wear a condom to catch and then slip it into a tissue and into a bin.

    Comment

    • lukmanrewa
      Senior Member
      • Jun 2012
      • 491

      #3
      Never really clean them apart from using a tissue to be honest. I'm just afraid that any chemicals might pop the balloon instead.

      But damn the dry cum stain smell combined with the latex is heavenly !

      Comment

      • Doc_Loon
        Junior Member
        • Mar 2018
        • 28

        #4
        Two ways depending on the balloon and condition. If they're just a little dusty, I will put them in a delicates bag and put them in the dryer for ten or so minutes to shrink them back to normal. If they get oxidized or sweaty etc, I run them under hot water being careful not to get water inside. Then I do the garment bag trick to dry them completely before storing them.

        If I want to re-inflate the balloon for multiple sessions I will hot water wash to keep it as shiny as possible and remove oxidation before using the dryer to completely dry it out. If I'm just shrinking it and may use it a second time OR ship it off to a friend for a final send off, I'll just use the dryer to shrink them. Being shrunk as opposed to stretched out is safer for storage and leads to less accidental tears in either case. In the latter case, the oxidation won't matter (for long anyway).

        Comment

        • Hazloon24
          Senior Member
          • Jun 2023
          • 150

          #5
          Originally posted by StealthDragon
          Two ways depending on the balloon and condition. If they're just a little dusty, I will put them in a delicates bag and put them in the dryer for ten or so minutes to shrink them back to normal. If they get oxidized or sweaty etc, I run them under hot water being careful not to get water inside. Then I do the garment bag trick to dry them completely before storing them.

          If I want to re-inflate the balloon for multiple sessions I will hot water wash to keep it as shiny as possible and remove oxidation before using the dryer to completely dry it out. If I'm just shrinking it and may use it a second time OR ship it off to a friend for a final send off, I'll just use the dryer to shrink them. Being shrunk as opposed to stretched out is safer for storage and leads to less accidental tears in either case. In the latter case, the oxidation won't matter (for long anyway).
          I think one mistake I have been making is if I have washed them, I have not stopped water getting inside, and that is probably one of the reasons why they do not last as long. I will definitely try harder to keep them intact.

          Comment

          • Hazloon24
            Senior Member
            • Jun 2023
            • 150

            #6
            Originally posted by Loon119
            I've never really bothered. I just use a tissue or towel to wipe off the excess and get them as dry as possible and that's pretty much it. I kind of like the dry streaks because it shows it's been well used. I dry my balloons well just because sometimes I sleep with them and don't want cum getting on me and also don't want it stuck to other stuff tbh. I once tried to use sex toy wipes but it ended up making the balloon sticky and I didn't like it. Also another cleaner was labelled as latex safe, I sprayed it on and my balloon disappeared faster than a pin pop. So now I just use a towel or tissue. If I'm in a hotel, camping, at a relatives house or similar I'll wear a condom to catch and then slip it into a tissue and into a bin.
            I always store mine away after use, I think I am just concerned about hygiene if cum residue is left on them, I am unaware of it is is safe or not, and will not cause any problems relating to sexual health. I think that boils down to anxiety and still being fairly new at being more sexual with balloons rather than enjoying looner videos.

            This came up as over the weekend I experienced cumming with the sole use of a balloon for the first time, so this question popped (lol) into my head whilst cleaning up.

            Comment

            • Hazloon24
              Senior Member
              • Jun 2023
              • 150

              #7
              Originally posted by Casey88
              Never really clean them apart from using a tissue to be honest. I'm just afraid that any chemicals might pop the balloon instead.

              But damn the dry cum stain smell combined with the latex is heavenly !
              I can agree about that smell, however I do worry about storage even if I was to just wipe it away with a tissue. Sadly I cannot leave my balloons inflated for long periods.

              Comment

              • AJK64
                Moderator
                • Jun 2018
                • 1280

                #8
                Old semen attracts mould very quickly. It is a perfect food source for bacteria and mould due to being high in proteins. sugars and fats. We should really be washing our balloons like any other sex toy after use

                Comment

                • Hazloon24
                  Senior Member
                  • Jun 2023
                  • 150

                  #9
                  Originally posted by AJK64
                  Old semen attracts mould very quickly. It is a perfect food source for bacteria and mould due to being high in proteins. sugars and fats. We should really be washing our balloons like any other sex toy after use
                  That is what I am concerned about! I suppose my worry after all is justified. Is generic hand soap good enough?

                  Comment

                  • AJK64
                    Moderator
                    • Jun 2018
                    • 1280

                    #10
                    Originally posted by Hazloon24

                    That is what I am concerned about! I suppose my worry after all is justified. Is generic hand soap good enough?
                    Just any old soap will do as long as you use it on fresh semen. Even just rinsing in hot water would work really. Just dry them off well afterwards

                    Comment

                    • Hazloon24
                      Senior Member
                      • Jun 2023
                      • 150

                      #11
                      Originally posted by AJK64

                      Just any old soap will do as long as you use it on fresh semen. Even just rinsing in hot water would work really. Just dry them off well afterwards
                      I do yes! And I purchased a hair dryer especially. I just need to stop letting water inside whilst cleanig. Some loons have produced mold in the past so I have had to throw them away

                      Comment

                      • loonlun
                        Senior Member
                        • Mar 2021
                        • 410

                        #12
                        I usually leave it be but if it's a particularly big load I'll wipe it with a tissue. Otherwise, as gross as it is, I kind of think of the stains as kind of a reminder of how well the balloon has served its purpose.

                        Comment

                        • Will Blown
                          Member
                          • Jan 2020
                          • 81

                          #13
                          I use a latex wear product called Viviclean. It’s made to hygienically clean latex clothing. Perfectly suited for balloons. I then treat with Vivishine. My balloons look like new after many inflations. Drying thoroughly and retalcing or treating with a silicone based latex conditioner is key!
                          If you take proper care of your balloons, they can last much longer than you think and still look shiny and new.

                          Comment

                          • Hazloon24
                            Senior Member
                            • Jun 2023
                            • 150

                            #14
                            Originally posted by Will Blown
                            I use a latex wear product called Viviclean. It’s made to hygienically clean latex clothing. Perfectly suited for balloons. I then treat with Vivishine. My balloons look like new after many inflations. Drying thoroughly and retalcing or treating with a silicone based latex conditioner is key!
                            If you take proper care of your balloons, they can last much longer than you think and still look shiny and new.
                            Thanks! I do wash them with soap, but that makes them very sticky once waiting for them to dry, and that in itself can be a pain, especially if talc is sometimes missed. I had a GEO burst mid inflation because I believe it damaged the balloon trying to peel it due to it being sticky. Luckily it wasn't around anything important at the time...

                            I will have a look into it, as I very rarely pop and would like to make certain balloons last, especially GEOs.

                            Comment

                            • O'Dragon
                              Senior Member
                              • Jan 2024
                              • 298

                              #15
                              I just rinse them under warm water. It gets off the cum and let the balloon shrink back.
                              I then wipe it dry with a towel and put it in my ziplock bag.
                              I only had mold once recently because of water inside I didn’t let dry our thoroughly before putting back in the ziplock bag.

                              Comment

                              Working...