The many possibilities of modeling balloons

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • O'Dragon
    Senior Member
    • Jan 2024
    • 298

    The many possibilities of modeling balloons

    Have you ever played with modeling balloons?
    I experimented with them when I searched for alternatives for the geo balloons. Still so sad they discontinued them.
    I found you can make a lot of different toys out of these balloons and it always feels amazing.
    Two I found to be the best because they are super easy to do and are a very satisfiying.

    [*EDIT* changed the descriptions for better understanding]

    For all toys I use Sempertex modeeling balloons in their largest size, 350.

    1. Lets call it the "Archtunnel" How_to_fold.png ​
    • Take the balloon, measure out a hand-width portion and twist it to form a bubble
    • Bend the long part towards you to form a small arch. Making sure there is no hole in the middle, place it next to the bubble from step 1
    • twist the arc with the bubble
    Repeat these 3 steps and form as many arcs as you like.​ The size of the small bubble determines the distance between each arc. Therefore, make sure it is quite small so that there are no gaps between the arcs. You can use this „tunnel“ now line any other pocket toy.

    Then add some lubes inside of it, grab it with both hands, get your d**** inside and have fun.
    If you like you can bend the remaining part of the balloon over the openening of the last arc to "seal" it or just make so many arcs that your d**** stays inside the toy.
    If you have so many arcs that you can't hold them all, you can use something like tape to hold them together.
    ​
    The beauty of this toy is you can tailor it to your needs by adjusting the size and the amount of arcs.


    2. this one is super simple: "The bundle"
    • blow up at least 9 balloons or more
    • Use something like tape or even another modeling balloon to tie them together so they form a long bundle.
    • sit down on the bundle just like you would when riding a balloon and have fun
    If the bundle is not big enough you can either use a pillow to lift it up or just use more balloons.

    After you're done you can either pop the balloons or just rinse them under water and let them dry. Then you can reuse them multiple times.

    Admittedly, these toys are probably a little more for those of you who like building DIY stuff, but I would recommend everyone give them a try at least once.

    If you try them out I am excited to hear what you think of them.
    Last edited by O'Dragon; 24-05-2024, 07:09.
  • balloonPatcher
    Senior Member
    • Jun 2020
    • 291

    #2
    Would you be able to post some pictures, so we can get a better idea on how these models look and work?
    Thanks

    Comment

    • 7balloon
      One of the First Online
      • Dec 2018
      • 683

      #3
      I'm going to tell you my best fun with long thin balloons of any kind.

      If they are long enough, balloon bundles are the way to go. And you can't go too far! Blow up half of them and then blow up two of them to serve as the "wrappers" Twist one into a tight circle around all the other blown up balloons. Then twist the other on the other side so that you have all the zepplins secured between two twisted zepplins. Then blow up the remaining zepplins and squeeze them into that circle until you just can't anymore. Then it's riding time and if you did it right, you slip bewteen 4 and 7 tight rubber toys and it's heaven. You can pin pop the ones on the bottom for some added thrills.


      If they aren't long enough for the first method, I blow them up so that they fill the center of a donut/geo and stick out from the donut hole. (I still have a few hundred so I didn't know they are discontinued?) Just more balloon to hump.

      That's my things.

      Comment

      • O'Dragon
        Senior Member
        • Jan 2024
        • 298

        #4
        Originally posted by balloonPatcher
        Would you be able to post some pictures, so we can get a better idea on how these models look and work?
        Thanks
        Yeah I‘ll see if I can make some at the weekend.

        Comment

        • O'Dragon
          Senior Member
          • Jan 2024
          • 298

          #5
          Originally posted by 7balloon
          I'm going to tell you my best fun with long thin balloons of any kind.

          If they are long enough, balloon bundles are the way to go. And you can't go too far! Blow up half of them and then blow up two of them to serve as the "wrappers" Twist one into a tight circle around all the other blown up balloons. Then twist the other on the other side so that you have all the zepplins secured between two twisted zepplins. Then blow up the remaining zepplins and squeeze them into that circle until you just can't anymore. Then it's riding time and if you did it right, you slip bewteen 4 and 7 tight rubber toys and it's heaven. You can pin pop the ones on the bottom for some added thrills.


          If they aren't long enough for the first method, I blow them up so that they fill the center of a donut/geo and stick out from the donut hole. (I still have a few hundred so I didn't know they are discontinued?) Just more balloon to hump.

          That's my things.
          Oh des that also sounds amazing!

          yeah they are just great. Quite happy I discovered them. Had such great rides the last days.

          Oh your method also sounds fantastic. I‘ll see if I may have the time this weekend to try it out.
          It really sounds like heaven.

          Comment

          Working...