I’ve tried different methods from boiling, microwave, oven to heat stretch balloons to get them bigger. Has anyone ever attempted using an air fryer? I think I might give it a try!
Heat stretching balloons
Collapse
X
-
Does that even work on balloons?
I only tried so far on Vinyl and it works good, but on Latex?
And I think you get too much more out of it since the material is already stretchy (unlike Vinyl) and so it expands anyways.
Only thing I heard to use heat when the balloon is deflated and you dont want it to be shriveled -
I've seen people bake balloons to get them bigger and I took my chances at a air fryer and didn't come out as I expectedAttached Files😂 3Comment
-
oh wow! I think air fryers are just too powerful. What you can bake in 30 mins you can air fry in 10. Use a traditional slow oven.
If the ovens needs 6-10 mins for balloons, then air fryers might need 30 seconds up to a max of 1 minute. Trial and error.Stretched like space-timeComment
-
The air fryer seems to be too aggressive.
I tried baking balloons in the oven. I you leave them in the oven one minute too long, they melt, if you remove them one minute too soon, nothing really changes, but i you hit the sweet spot, you can get amazing results. I could inflate 12" balloons to about 20" on the second inflation after baking. They looked like soap bubbles even if they were opaque balloons. You should clean up you oven afterwards very well. The smell is disgusting and the smells and baked balloons are NOT healthy at all. They are more something to be looked at and very delicate after baking and being inflated that big.
I also inflated balloons with hot steam from an old steam cleaner. They got really big and floated like helium balloons, but popped before the neck inflated (always protect yourself from the hot steam and hot water that will be spread in all directions when the balloon pops, i did this behind the glass door of a shower).
I also tried putting balloons into a sieve above boiling water for a few minutes. Balloons can get a little bigger with this method and i like, how they feel after that and being inflated. If you b2p a balloon like that, it shreds into hundreds of small pieces, that it otherwise not always would do. This seems to be a sign for the balloon now being abled to stretch to its real maximum. They smell much better, than baked balloons.👍 2Comment
-
I have a small fan heater and have used it to heat balloons up before inflating. The balloons seem a little more stretchy afterwards.
A technique I've found good for getting the most out of balloons takes a little effort and preparation but the results can be amazing. It requires and electric balloon pump and the previously mentioned electric fan heater.
1. Blow the balloon up to max size with the pump deflate and repeat one more time.
2. Hold the bulb of the balloon with one hand and just inflate the neck on the pump as much as it will go. Deflate and repeat once more.
3. Hold the balloon in front of the electric heater and let the heat shrink it back to original shape. Hold the balloon right in front of the heat for about 1 min turning it so every part gets some heat (hold with tongs or something so you don't burn your hand)
4. Finally inflate the balloon on the pump again tugging to encourage a good neck to form... You can do this final inflation by mouth if you prefer too
I find that I can get most 12 inch balloons to a nice 13 or 14 inches using this technique with a really nice neck too from the prestretchingLast edited by AJK64; 29-03-2024, 13:30.Comment
Comment