Have been reading lots of old Topics but either I´ve over read it or noone has posted it yet (what I´d find odd).
As we´re using our Standard Latex / rubber Ballons... have you had experiences with foil balloons?
Someone I know and who I asked for bought me a (nice) stash of random Ballons. As I mentioned it, he also got me foil balloons in the package he sent
me. These are kinda neutral as they´re just colored green and don´t have a Motive. The shape is simple... I´d say they are shaped like a quarter so not round.
Unlike a normal balloon These are inflated different and I´ve wasted a lot of them with the attempt to figure out how they are inflated. They have an entrance for the air but you can´t just blow on it... it won´t fill the balloon. I´ve tried blowing on it but I was Feeling dizzy already, and the balloon wasn´t inflated even a tiny Little bit.
The first (many) foil balloons ended up being cut in a Corner with scissors, inflated and the cut closed aggain with a knod.
I´m into sitting on balloons and so I gave it a sit, initially it Held suprisingly well (given how super thin the material is) but when I applied more weight to it the knod started to un-knod, and when I fixed it thight aggain, applied weight aggain, the Ballons often just popped at a similar weight Level than an averge trashbag.
I´ve heared that you Need to put a straw into the Inflation Point and inflate it with a straw... unfortunately I don´t have a straw but I tried it with a "pipe" from a liquid Soap box... and it didn´t work for me. I cut open one of the balloons for Research purposes and I found out that from the Inflation Point there goes some Kind of "plastic tube" into it... but looking at it it looked like a production mistake, because from just looking on it looked like as if this whole thing was closed... do you have to force open it with a Long needle or nail first? I was just confused.
Later I played around with These foil balloons aggain, and I was just sitting on a normal - Latex - balloon naked and tried something. I´ve put tweezers into the air-entrance part of the foil ballon, with some resistance I could get them in there. Then I took another (Latex) Balloon, inflated it, and let the air out ... blowing to the air entrance from the foil ballon... after a while I could feel that the foil ballon slowly fills with air... super slowly, but it fills.
So I rinse and repeat that for a while and when the foil balloon got big I noticed at some point it would take on air that ´s blown into it quite good. Actually it even nearly happened that my tweezers fell into the balloon - luckily I got them out.
I do not know when such a foil balloon could be called fully inflated or not, but the one I had was quite big now and I could see the material ... or better I had the Feeling this is the supposed size of this balloon. Blowing more air into it didn´t work as it didn´t take on more air.
So the first one I had then, I wanted to see how much weight it can take... altough I´m quite good now, with popping noise Level from a ballon (hence wearing my toilett-paper-earplugs who reduce the loud bang to just a rather silent Pop noise) I was still a Little bit phobic about the foil ballon because I´ve read if These Pop, they go off really loud.
As the foil material on These is really thin, maybe as thick as on a potatoe chip package I was not expecting the balloon to take much weight. I´ve put it on my seat (toilett with cover down so I can sit on it) and reduced my leg Support, making the ballon needing to carry more and more of my weight. But... it didn´t Pop... it Held me...
I put the balloon on the ground and sat on it (more stress for the balloon) but except I could feel how the material "worked" under me, and the balloon was super thight, still no Pop. For the first one I stopped then. I placed myself in a nice sitting possition and fapped til I came, then put a hole into the ballon and got rid of it (getting rid of These has something to do with the illness I mention and other reasons I feel sad when I have to get rid of them actually).
On the next session I wanted to know it... I wanted to know how much These can take and how loud they are... I re inflated one about the same size as the pervious one... I put it on ground and set on it... totally Relaxing my legs... the balloon was super strong, but didn´t Pop... I started riding... up and down, like a spring, the ballon answers my "I let myself fall down to it" Actions and pushes me up... still no Pop...
What is going on? I thought, and intensified my riding... I was now riding quite good, but still no Pop...
I only archeived the bang, when I intensified my riding so strong, that I was more or less jumping on the balloon, with my butt "Lifting off" every time I was moving upwards a few Inch away from the balloon - Keep in mind, I weigh 110Kgs and the balloons material is super thin...
So... Foil Balloon experience anyone? Regarding my experience I´d summarize it like that: As Long as the material is intact (I guess the first ones popped because I folded the foil... they were also sent in a big cardboard box, flat, not folded - when I got them - similar to how a Vinyl record would be shipped) ... as Long as the material is intact they´re super strong... but if you just mess with the material a Little bit, bend it to much ... they burst easy.
As we´re using our Standard Latex / rubber Ballons... have you had experiences with foil balloons?
Someone I know and who I asked for bought me a (nice) stash of random Ballons. As I mentioned it, he also got me foil balloons in the package he sent
me. These are kinda neutral as they´re just colored green and don´t have a Motive. The shape is simple... I´d say they are shaped like a quarter so not round.
Unlike a normal balloon These are inflated different and I´ve wasted a lot of them with the attempt to figure out how they are inflated. They have an entrance for the air but you can´t just blow on it... it won´t fill the balloon. I´ve tried blowing on it but I was Feeling dizzy already, and the balloon wasn´t inflated even a tiny Little bit.
The first (many) foil balloons ended up being cut in a Corner with scissors, inflated and the cut closed aggain with a knod.
I´m into sitting on balloons and so I gave it a sit, initially it Held suprisingly well (given how super thin the material is) but when I applied more weight to it the knod started to un-knod, and when I fixed it thight aggain, applied weight aggain, the Ballons often just popped at a similar weight Level than an averge trashbag.
I´ve heared that you Need to put a straw into the Inflation Point and inflate it with a straw... unfortunately I don´t have a straw but I tried it with a "pipe" from a liquid Soap box... and it didn´t work for me. I cut open one of the balloons for Research purposes and I found out that from the Inflation Point there goes some Kind of "plastic tube" into it... but looking at it it looked like a production mistake, because from just looking on it looked like as if this whole thing was closed... do you have to force open it with a Long needle or nail first? I was just confused.
Later I played around with These foil balloons aggain, and I was just sitting on a normal - Latex - balloon naked and tried something. I´ve put tweezers into the air-entrance part of the foil ballon, with some resistance I could get them in there. Then I took another (Latex) Balloon, inflated it, and let the air out ... blowing to the air entrance from the foil ballon... after a while I could feel that the foil ballon slowly fills with air... super slowly, but it fills.
So I rinse and repeat that for a while and when the foil balloon got big I noticed at some point it would take on air that ´s blown into it quite good. Actually it even nearly happened that my tweezers fell into the balloon - luckily I got them out.
I do not know when such a foil balloon could be called fully inflated or not, but the one I had was quite big now and I could see the material ... or better I had the Feeling this is the supposed size of this balloon. Blowing more air into it didn´t work as it didn´t take on more air.
So the first one I had then, I wanted to see how much weight it can take... altough I´m quite good now, with popping noise Level from a ballon (hence wearing my toilett-paper-earplugs who reduce the loud bang to just a rather silent Pop noise) I was still a Little bit phobic about the foil ballon because I´ve read if These Pop, they go off really loud.
As the foil material on These is really thin, maybe as thick as on a potatoe chip package I was not expecting the balloon to take much weight. I´ve put it on my seat (toilett with cover down so I can sit on it) and reduced my leg Support, making the ballon needing to carry more and more of my weight. But... it didn´t Pop... it Held me...
I put the balloon on the ground and sat on it (more stress for the balloon) but except I could feel how the material "worked" under me, and the balloon was super thight, still no Pop. For the first one I stopped then. I placed myself in a nice sitting possition and fapped til I came, then put a hole into the ballon and got rid of it (getting rid of These has something to do with the illness I mention and other reasons I feel sad when I have to get rid of them actually).
On the next session I wanted to know it... I wanted to know how much These can take and how loud they are... I re inflated one about the same size as the pervious one... I put it on ground and set on it... totally Relaxing my legs... the balloon was super strong, but didn´t Pop... I started riding... up and down, like a spring, the ballon answers my "I let myself fall down to it" Actions and pushes me up... still no Pop...
What is going on? I thought, and intensified my riding... I was now riding quite good, but still no Pop...
I only archeived the bang, when I intensified my riding so strong, that I was more or less jumping on the balloon, with my butt "Lifting off" every time I was moving upwards a few Inch away from the balloon - Keep in mind, I weigh 110Kgs and the balloons material is super thin...
So... Foil Balloon experience anyone? Regarding my experience I´d summarize it like that: As Long as the material is intact (I guess the first ones popped because I folded the foil... they were also sent in a big cardboard box, flat, not folded - when I got them - similar to how a Vinyl record would be shipped) ... as Long as the material is intact they´re super strong... but if you just mess with the material a Little bit, bend it to much ... they burst easy.
Comment